Translocation of Three Historical Buildings in Renovation of the Porcelain Tower of Nanjing
Publication: Journal of Performance of Constructed Facilities
Volume 32, Issue 1
Abstract
In order to adapt to a new site planning of the Porcelain Tower of Nanjing, China, two two-story and one three-story historical masonry building built in the 1930s were translocated. Because of the limited ground space, the three buildings were divided into eight parts and reconnected after translocation. The moving routes had multiple broken lines to avoid influencing surrounding old trees, and the maximum translocation distance was 184 m. Some building units were rotated by 7 degrees or lowered by 4.2 m, in accordance with the new site planning. Procedure and technical details of the translocation, including the structural strengthening, load underpinning, structural separation, ground treatment and reconnection, etc., are introduced in this paper. One building was pulled by a traditional hydraulic-jack system with high-strength steel strands; the other two buildings were moved by using a novel translocation device, which is capable of self-walking and turning 360 degrees, in order to change the translocation direction more efficiently. Through the vertical hydraulic jack in this new translocation device, the undesirable difference in column settlements can be automatically compensated, which loosens the requirement on the rail stiffness.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the Program of the National Natural Science Foundation (No. 51508251), the Natural Science Fund for Colleges and Universities in Jiangsu Province (No. 15KJB560005), and the Jinling Institute of Technology High-Level Personnel Work Activation Fee to Fund Projects (No. jit-b-201614).
References
Chinese National Standard of the People’s Republic of China. (2010). “Code for design of concrete structures.” GB 50010-2010, Beijing (in Chinese).
Guo, T., Li, A. Q., Wei, L. W., and Gu, Y. (2013). “Horizontal translocation of a high-rise building: Case study.” J. Perform. Constr. Facil., 235–243.
Guo, T., Wu, E. J., Li, A. Q., Wei, L. W., and Li, X. P. (2012). “Integral lifting and seismic isolation retrofit of great hall of Nanjing Museum.” J. Perform. Constr. Facil., 558–566.
Kenward, J., and Monnickendam, A. (2006). “Lift, launch and lower replacing the Bishop’s Bridge Road bridge at Paddington Station.” Struct. Eng., 84(17), 39–44.
Lowry, J. W., and Ramey, G. E. (1982). “Highway bridge lift/monitoring system.” Exp. Tech., 6(4), 14–16.
Telem, D., Shapira, A., Goren, Y. D., and Schexnayder, C. J. (2006). “Moving a reinforced-concrete building: Case study.” J. Constr. Eng. Manage., 115–124.
Tian, L., Hao, J., Wei, J., and Zheng, J. (2016). “Integral lifting simulation of long-span spatial steel structures during construction.” Autom. Constr., 70, 156–166.
Wu, E. J., and Li, A. Q. (2008). “Technical code for building monolithic moving engineering of China. Creating and renewing urban structures.” Proc., 17th Congress of Int. Association for Bridge and Structural Engineering (IABSE), International Association for Bridge and Structural Engineering, Zurich, Switzerland, 514–515.
Zhao, Y., Wang, J. F., and Pang, M. (2011). “The integral lifting project of the Qifeng Bridge: Case study.” J. Perform. Constr. Facil., 353–361.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Nov 11, 2016
Accepted: Jul 17, 2017
Published online: Nov 28, 2017
Published in print: Feb 1, 2018
Discussion open until: Apr 28, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.