Rehabilitation and Retrofitting of a Multispan Simply-Supported Adjacent Box Girder Bridge into a Jointless and Continuous Structure
Publication: Journal of Performance of Constructed Facilities
Volume 32, Issue 1
Abstract
The widely-utilized multispan simply-supported adjacent (side-by-side) box girder bridges often suffer from problems of deterioration attributable to transverse cracking in link slabs between spans, malfunctioning expansion joints, and longitudinal cracks between adjacent girders. Such problems can degrade the functionality, durability or even safety of the bridge over time, depending on the environmental exposure conditions. This paper discusses an approach taken to rehabilitate the Shili Bridge by eliminating expansion joints and retrofitting the structure from simply-supported box girders into a continuous bridge. Condition assessments were performed before retrofitting. In addition, several design options and construction procedures were considered and analyzed. Static and dynamic load tests were carried out after the completion of rehabilitation. The lessons learned in this project are presented and discussed. This practical and novel methodology is a step forward toward improving safety, sustainability, reliability, and quality of such existing bridges in China and elsewhere.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors appreciate the support from the Natural Science Foundation of China through Grant Nos. 51278126, 51578161, and 51778147 and the Zhejiang Provincial Natural Science Fund (LY17E080022).
References
Ahlborn, T. M., Aktan, H., Attanayake, U., Deshpande, Y., and Ulku, E. (2009). Condition assessment and methods of abatement of prestressed concrete box-girder deterioration, phase II, Michigan Dept. of Transportation, Detroit.
Dai, J. G., Huang, C. K., and Zhao, G. F. (2000). “Non-structural cracks and synthetic fibers control in concrete.” J. Build. Struct., 30(9), 56–59 (in Chinese).
Dong, J. C., Chen, B. C., Briseghella, B., and Zhuang, Y. Z. (2015a). “Integral transformation design of multi-span hollow slab simply-supported bridge.” J. Archit. Civil Eng., 32(5), 73–80 (in Chinese).
Dong, J. C., Xu, Z., Briseghella, B., Zhuang, Y. Z., and Chen, B. C. (2015b). “Jointless retrofit design and construction of a multi-span simply supported hollow slab bridge.” J. China Foreign Highway, 35(4), 170–174 (in Chinese).
Dong, X. (2002). “Traffic forces and temperature effects on shear key connection for adjacent box girder bridge.” Ph.D. dissertation, Univ. of Cincinnati, Cincinnati.
He, C. Y., Wang, J. B., Yang, Y., and Huo, H. B. (2006). “Test and analysis of polypropylene fiber for bridge deck waterproof surfacing.” J. Earthquake Eng. Eng. Vib., 26(3), 56–60 (in Chinese).
Hu, T. M., Huang, C. K., Chen, X. H., and Liang, Z. Y. (2010). “Fatigue experiment of concrete bridges strengthened by simple-supporting to continuous construction method.” China J. Highway Transport, 23(5), 76–82 (in Chinese).
JGJ (Jian Gong Jian). (2010). “Technical specification for application of fiber reinforced concrete.” JGJ/T 221-2010, China Building Industry Press, Beijing (in Chinese).
JGJ (Jian Gong Jian). (2011). “Technical specification for inspecting of concrete compression strength by rebound method.” JGJ/T 23-2011, China Building Industry Press, Beijing (in Chinese).
Jiang, X. L., Yi, H. B., and Yu, B. (2013). External prestressing technique on bridge and reinforcement engineering examples, China Communications Press, Beijing (in Chinese).
Jin, X. H., Yao, Q. M., and Zhang, P. T. (2006). “Reinforcing effect analysis of converting simply-support into continuous for multi-span T shape free beam bridge.” J. Chongqing Jiaotong Univ., 25(2), 4–7 (in Chinese).
JTG (Jiao Tong Gong). (1989). “General code for design of highway bridges and culverts.” JTJ 021-89, China Communications Press, Beijing (in Chinese).
JTG (Jiao Tong Gong). (2004a). “Code for design of highway reinforced concrete and prestressed concrete bridges and culverts.” JTG D62-2004, China Communications Press, Beijing (in Chinese).
JTG (Jiao Tong Gong). (2004b). “General code for design of highway bridges and culverts.” JTG D60-2004, China Communications Press, Beijing (in Chinese).
JTG (Jiao Tong Gong). (2008). “Specifications for strengthening design of highway bridge.” JTG/T J22-2008, China Communications Press, Beijing (in Chinese).
JTG (Jiao Tong Gong). (2011a). “Specification for inspection and evaluation of load-bearing capacity of highway bridge.” JTG/T J21-2011, China Communications Press, Beijing (in Chinese).
JTG (Jiao Tong Gong). (2011b). “Standards for technical condition evaluation of highway bridge.” JTG/T H21-2011, China Communications Press, Beijing (in Chinese).
JT (Jiao Tong). (2004). “Plate type elastomeric pad bearing for highway bridges.” JT/T4-2004, China Communications Press, Beijing (in Chinese).
Liu, T. (2012). “The application of simply continuous method to simply supported T-beam bridge reinforcement of reinforced concrete.” J. Shan Xi Sci. Technol. Commun., 15(2), 68–69 (in Chinese).
MDOT (Michigan Department of Transportation). (2003). Bridge design guide, Lansing, MI.
Midas Civil [Computer software]. Midas Information Technology, Beijing.
Miller, R. A., Hlavacs, G. M., Long, T., and Greuel, A. (1999). “Full-scale testing of shear keys for adjacent box girder bridges.” PCI J., 44(6), 80–90.
Nie, R. F., Shi, X. F., Ruan, X., and Geng, S. B. (2014). “Research of calculation method for moment lateral distribution factors of multi-lane hollow slab girder bridges in service.” J. Bridge Constr., 44(2), 56–60 (in Chinese).
RIHMT (Research Institute of Highway Ministry of Transport). (2012). “Damaged concrete girder bridge and investigation analysis.”, Beijing (in Chinese).
Xiang, Y. Q., Xing, C., Shao, L. H., Xing, Y., and Chao, C. F. (2012). “Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints.” J. Southeast Univ., 42(4), 734–738 (in Chinese).
Xiang, Y. Q., Zhang, X., Zhao, J., Liao, X. H., and Li, S. J. (2015). “Full-range analysis and experimental study of flexural behavior of PC hollow slab girders out of service.” J. Bridge Constr., 45(5), 30–35 (in Chinese).
Yu, B. (2011). “Experimental study on the integral strengthening of prefabricated concrete hollow slab bridge.” Ph.D. dissertation, Southeast Univ., Nanjing, China (in Chinese).
Yu, Z. Y., Chen, Y. X., and Qi, Z. H. (2006). “Strengthening of superstructure of simply-supported hollow slab beam bridge.” J. Liaoning Commun. Sci. Technol., 24(2), 37–39 (in Chinese).
Yuan, J. Q., and Graybeal, B. (2016). “Full-scale testing of shear key details for precast concrete box-beam bridges.” J. Bridge Eng., 21(9), 04016043.
Zhang, S. R. (2004). “Design of reinforced and prestressed concrete bridge structure.” China Communications Press, Beijing (in Chinese).
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Dec 20, 2016
Accepted: Jun 13, 2017
Published online: Oct 24, 2017
Published in print: Feb 1, 2018
Discussion open until: Mar 24, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.