Residual Service Life Prediction for Bridges Based on Critical Life Curves
Publication: Journal of Performance of Constructed Facilities
Volume 31, Issue 5
Abstract
A residual service life prediction method based on critical life curves of selected bridge members is presented in this paper for bridges in service. The lowest target reliability index is selected as the criterion for the end of the lifecycle of bridges based on bridge design codes. Based on various assessment reference periods, a simple stochastic process model of resistance is adopted to evaluate corresponding resistance reduction coefficients related to the adopted lowest reliability index. By proposing the critical life curves based on flexural resistant capacity, the paper established a new method to predict the residual service life of bridges. A case study is used to demonstrate the proposed approach. The authors inspected 11 pieces of 13-m hollow-core slab beams that had been in use for 11 years. The accuracy of the prediction method was verified through a field condition investigation and a lab destructive test on a beam dismantled from the studied bridge.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research described in this paper was financially supported by Transportation Research Project of Ministry of Transport, People’s Republic of China, “Damage Assessment and Reliability Study of Beam Bridge” (2013 318 223 040).
References
AASHTO. (2011). “The manual for bridge evaluation, 2nd Ed., with 2011, 2013, 2014, 2015, and 2016 interim revisions.” Washington, DC.
Cheung, M. S., Zhao, J., and Chen, Y. B. (2009). “Service life prediction of RC bridge structures exposed to chloride environments.” J. Bridge Eng., 164–178.
Department of Transport. (1989). “General specifications for design of highway bridges and culverts (JTJ021 1989).” Standard of Dept. of Transport, Beijing.
Duprat, F. (2007). “Reliability of RC beams under chloride-ingress.” Constr. Build. Mater., 21(8), 1605–1616.
Enright, M. P., and Frangopol, D. M. (1998). “Service-life prediction of deteriorating concrete bridges.” J. Struct. Eng., 309–317.
AQSIQ and MOHURD (General Administration of Quality Supervision, Inspection and Quarantine and Ministry of Housing and Urban-Rural Development). (1999). “National standard of P.R. China: Unified standard for reliability design of highway engineering structures.”, Beijing.
Liang, M.-T., Huang, R., Feng, S. A., and Yeh, C. (2009). “Service-life prediction of pier for the existing reinforced concrete bridges in chloride-laden environment.” J. Mar. Sci. Technol., 17(4), 312–319.
Lv, Y. (2006). “Research on reliability evaluation and residual service life forecast of existing concrete bridges.” Ph.D. thesis, Chang’an Univ., Xi’an, China.
Marchand, J., and Samson, E. (2009). “Predicting the service-life of concrete structures: Limitations of simplified models.” Cement Concr. Compos., 31(8), 515–521.
Markeset, G. (2009). “Critical chloride content and its influence on service life predictions.” Mater. Corros., 60(8), 593–596.
Moses, F. (2001). “Calibration of load factors for LRFR bridge evaluation.”, Univ. of Pittsburgh, Pittsburgh.
Okasha, N. M., and Frangopol, D. M. (2010). “Advanced modeling for efficient computation of life-cycle performance prediction and service-life estimation of bridges.” J. Comput. Civ. Eng., 548–556.
Paulsson-Tralla, J. (2010). “Service-life prediction of concrete bridge decks repaired with bonded concrete overlays.” Mater. Struct., 24(1), 34–41.
Sobhani, J., and Ramezanianpour, A. A. (2011). “Service life of the reinforced concrete bridge deck in corrosive environments: A soft computing system.” Appl. Soft Comput., 11(4), 3333–3346.
Sohanghpurwala, A. A. (2006). “Manual on service life of corrosion-damaged reinforced concrete bridge superstructure elements.”, Transportation Research Board, Washington, DC.
Strauss, A., Wendner, R., Bergmeister, K., and Costa, C. (2013). “Numerically and experimentally based reliability assessment of a concrete bridge subjected to chloride-induced deterioration.” J. Infrastruct. Syst., 166–175.
Su, H., Hu, J., and Wen, Z. (2013). “Service life predicting of dam systems with correlated failure modes.” J. Perform. Constr. Facil., 252–269.
Torres-Acosta, A. A., Navarro-Gutierrez, S., and Terán-Guillén, J. (2007). “Residual flexure capacity of corroded reinforced concrete beams.” Eng. Struct., 29(6), 1145–1152.
Wang, J. (2009). Inspection reliability analysis and life prediction of existing bridges, China Water Power Press, Beijing.
Wang, S., and Li, S. (2010). “Reliability-based critical life curve of shear capacity of existing RC bridges.” J. Highway Transp. Res. Develop., 27(4), 84–88.
Zhang, Y., Jiang, L., and Zhang, W. E. A. (2003). Durability of concrete structure, Shanghai Scientific and Technical Press, Shanghai, China.
Zhao, S. (2001). “Reliability based assessment and test research of durability of reinforced concrete structures.” Ph.D. thesis, Dalian Univ. of Technology, Dalian, China.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Mar 7, 2016
Accepted: Dec 16, 2016
Published online: Mar 29, 2017
Discussion open until: Aug 29, 2017
Published in print: Oct 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.