Performance of High Friction Bridge Deck Overlays in Crash Reduction
Publication: Journal of Performance of Constructed Facilities
Volume 31, Issue 2
Abstract
In recent history, a number of State Departments of Transportation have looked at providing safer driving conditions on bridges. One improvement method is placing high friction overlays on bridge decks. This study analyzed crash data to evaluate the performance of high friction overlays in reducing crashes. This study was completed by analyzing 10 years of data for nine bridges encompassing four different proprietary overlay systems. Within one of the overlay systems, three different aggregate types were also compared. Crash characteristics analyzed included the crash time, weather conditions, bridge surface conditions, average annual daily traffic, and severity of crashes. This study is part of a comprehensive study that includes extensive field evaluation and comparative performance analysis between different systems to evaluate their effectiveness on bridge decks in Minnesota. While the data presented herein is from bridge sites located in Minnesota, the findings apply to most of the northern tier states in the United States as well as other countries with colder climatic conditions. The analysis of data suggests that although there is a reducing trend in overall number of crashes; a reduction in crashes on bridges cannot be completely attributed to the use of high friction overlays. Furthermore, the presence of high friction overlays are unable to play a role in winter crash prevention. Thus this study shows that forensic evaluation of accident data does not support commonly anticipated crash reduction benefit of high friction overlays.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to express sincere gratitude to the Minnesota Department of Transportation for supporting the research presented in this paper. The views expressed in this paper are that of the authors and do not reflect those of sponsors.
References
Anderson, K. W., Russell, M., Sheets, J., Burkey, D., Uhlmeyer, J. S., and Weston, J. (2012). “Evaluation of Tyregrip high-friction surfacing.”, Washington State Dept. of Transportation, Olympia, WA.
ASTM. (2006). “Standard test method for measuring pavement macrotexture depth using a volumetric technique.” ASTM E965-96, West Conshohocken, PA.
ASTM. (2009). “Standard test method for measuring paved surface frictional properties using the dynamic friction tester.” ASTM E1911-09, West Conshohocken, PA.
ASTM. (2011). “Standard test method for skid resistance of paved surfaces using a full-scale tire.” ASTM E274, West Conshohocken, PA.
ASTM. (2012). “Standard test method for electrical indication of Concrete’s ability to resist chloride ion penetration.” ASTM C1202-12, West Conshohocken, PA.
Dave, E. V., Kostick, R. D., and Dailey, J. (2014). “Comparative performance study of chip seal and bonded wear course systems applied to bridge decks and approaches: Field cracking, debonding and wearing evaluation, year-1.” Minnesota Dept. of Transportation, St. Paul, MN.
Evans, J. F. (2010). “Evaluation of the SafeLane overlay system for crash reduction on bridge deck surfaces.”, Minnesota Dept. of Transportation, St. Paul, MN.
Harper, J. (2007). “Investigations of failures of epoxy polymer overlays in Missouri.”, Missouri Dept. of Transportation, Jefferson City, MO.
Izeppi, E., Flintsch, G. W., and McGhee, K. K. (2010). “Field performance of high friction surfaces.”, Federal Highway Administration, Richmond, VA.
Long, K., Wu, H., Zhang, Z., and Murphy, M. (2014). “Quantitative relationship between crash risks and pavement skid resistance.”, Texas Dept. of Transportation, Austin, TX.
Minnesota Department of Transportation (MnDOT). (2014). “About MN TZD.” ⟨http://www.minnesotatzd.org/⟩ (Aug. 15, 2014).
Nelson, T. (2011). “Evaluation of skid resistance of turf drag textured concrete pavements.”, Minnesota Dept. of Transportation, Maplewood, MN.
Watson, M., Clyne, T., and Izevbekhai, B. (2011). “Hot mixed asphalt pavement surface characteristics related to ride, texture, friction, noise and durability.”, Minnesota Dept. of Transportation, Maplewood, MN.
Young, L. M., Durham, S. A., and Bindel, M. K. (2012). “Thin bonded epoxy overlays on concrete bridge deck surfaces.” Transportation Research Board 91st Annual Meeting, National Academies, Washington, DC.
Zanko, L., Fosnacht, D., and Hopstock, D. (2009). “Construction aggregate potential of Minnesota taconite industry byproducts.” Proc., ASCE 14th Conf. on Cold Regions Engineering, ASCE, Reston, VA, 252–274.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Aug 14, 2015
Accepted: Jun 3, 2016
Published online: Sep 13, 2016
Discussion open until: Feb 13, 2017
Published in print: Apr 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.