Effect of Corrosion on Bond Mechanism between Extremely Low-Strength Concrete and Plain Reinforcing Bars
Publication: Journal of Performance of Constructed Facilities
Volume 30, Issue 3
Abstract
In this study, a bond-slip model is proposed to take into account the effects of corrosion on the bond characteristics between extremely low-strength concrete and plain reinforcing bars. The proposed bond-slip model is based on reversed cyclic lateral loading tests of nearly full-scale reinforced concrete columns with reinforcing bars corroded to different levels. The columns taken into consideration during the current study were part of an extensive experimental program designed to study the performance of older columns at Istanbul Technical University. The columns were representative of a large number of underperforming reinforced concrete buildings prone to seismic actions throughout the world. Test results demonstrated that the corrosion of reinforcing bars had a significant effect on the strength and deformability characteristics of substandard reinforced concrete columns subjected to the combined actions of axial and reversed cyclic lateral loads. Taking this aspect into consideration, a novel bond-slip model is established to estimate the variation in bond strength degradation and the bond strength as a function of the level of corrosion of the reinforcing bars. Furthermore, the predictions of the proposed model are also verified with experimental results from the literature.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The experimental study was performed at the Structural and Earthquake Engineering and Building Material Laboratories of Istanbul Technical University (ITU). The contributions of Dr. C. Demir, B. Demirtas (MSc), E. Binbir (MSc), A. Aydoğmus (BSc), K. Darilmaz, M. Urgen, Dr. B. Yuksel, K. Orakcal, U. Demir (MSc), ITU Scientific Research Fund Department (Project No. 32794), TUBITAK (Scientific Research Project No.104I022), Telateks Textile Co., Nuh Concrete Co., and Oyak Concrete Co. are gratefully acknowledged.
References
Almusallam, A. A., Al-Gahtani, A. S., Aziz, A. R., and Rasheeduzzafar, I. A. (1996). “Effect of reinforcement corrosion on bond strength.” Constr. Build. Mater., 10(2), 123–129.
Al-Sulaimani, G. J., Kaleemullah, M., Basunbul, I. A., and Rasheeduzzafar, I. A. (1990). “Influence of corrosion and cracking on bond behavior and strength of reinforced concrete members.” Struct. J., 87(2), 220–231.
Arani, K. K., Di Ludovico, M., Marefat, M. S., Prota, A., and Manfredi, G. (2014). “Lateral response evaluation of old type reinforced concrete columns with smooth bars.” Struct. J., 111(4), 827–838.
ASCE. (2006). “Seismic rehabilitation standard.” 41, Washington, DC.
ASTM. (2003). “Standard practice for preparing, cleaning and evaluating corrosion test specimens.” G1, West Conshohocken, PA.
Auyeung, Y., Balaguru, P., and Chung, L. (2000). “Bond behavior of corroded reinforcement bars.” Mater. J., 97(2), 214–220.
Bal, I. E., Gulay, G., and Gorgulu, O. (2007). “Investigation on structural characteristics of R/C buildings in Adana for use in loss estimation models.” Proc., 6th National Conf. on Earthquake Engineering, Maya Publishing Company, Istanbul, Turkey.
Berto, L., Simioni, P., and Saetta, A. (2008). “Numerical modeling of bond behaviour in RC structures affected by reinforcement corrosion.” Eng. Struct., 30(5), 1375–1385.
Bousias, S. N., Triantafillou, T. C., Fardis, M. N., Spathis, L. A., and O’Regan, B. A. (2004). “Fiber-reinforced polymer retrofitting of rectangular reinforced concrete columns with or without corrosion.” Struct. J., 101(4), 512–520.
Cairns, J., Du, Y., and Law, D. (2006). “Residual bond strength of corroded plain round bar.” Mag. Concr. Res., 58(4), 221–231.
Cho, J. Y., and Pincheira, J. A. (2006). “Inelastic analysis of reinforced concrete columns with short lap splices subjected to reversed cyclic loads.” Struct. J., 103(2), 280–290.
Coronelli, D. (2002). “Corrosion cracking and bond strength modeling for corroded bars in reinforced concrete.” Struct. J., 99(3), 267–276.
Eurocode. (2005). “Design of structures for earthquake resistance.”, European Standard, Brussels.
Fang, C., Gylltoft, K., Lundgren, K., and Plos, M. (2006). “Effect of corrosion on bond in reinforced concrete under cyclic loading.” Cem. Concr. Res., 36(3), 548–555.
Fang, C., Lundgren, K., Chen, L., and Zhu, C. (2004). “Corrosion influence on bond in reinforced concrete.” Cem. Concr. Res., 34(11), 2159–2167.
fib (Fédération International du Béton/International Federation for Structural Concrete). (2010). “Model code 2010.” Lausanne, Switzerland.
Goksu, C. (2012). “Seismic behavior of RC columns with corroded plain and deformed reinforcing bars.” Ph.D. thesis, Istanbul Technical Univ., Turkey.
Goksu, C., Yilmaz, H., Chowdhury, S. R., Orakcal, K., and Ilki, A. (2014). “The effect of lap splice length on the cyclic lateral load behavior of columns with low-strength concrete and plain bars.” Adv. Struct. Eng., 17(5), 639–658.
Ilki, A., and Celep, Z. (2012). “Earthquakes, existing buildings and seismic design codes in Turkey.” Arab. J. Sci. Eng., 37(2), 365–380.
Inci, P., Goksu, C., and Ilki, A. (2013). “Effects of reinforcement corrosion on the performance of RC frame buildings subjected to seismic actions.” J. Perform. Constr. Facil., 683–696.
Jin, W. L., and Zhao, Y. X. (2001). “Effect of corrosion on bond behavior and bending strength of reinforced concrete beams.” J. Zhejiang Univ., 2(3), 298–308.
Koru, B. Z. (2002). “Seismic vulnerability assessment of low-rise reinforced concrete buildings.” Ph.D. thesis, Purdue Univ., West Lafayette, IN.
Lehman, D. E., and Moehle, J. P. (2000). “Seismic performance of well-confined concrete bridge columns.”, Pacific Earthquake Engineering Research Center College of Engineering, Univ. of California, Berkeley, CA.
Lundgren, K., Kettil, P., Hanjari, K. Z., Schulune, H., and Soto San Roman, A. (2009). “Analytical model for the bond-slip behavior of corroded ribbed reinforcement.” Struct. Infrastruct. Eng., 8(2), 157–169.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988). “Theoretical stress-strain model for confined concrete.” J. Struct. Eng., 1804–1826.
Mangat, P. S., and Elgarf, M. S. (1999). “Bond characteristics of corroding reinforcement in concrete beams.” Mater. Struct., 32(2), 89–97.
Melek, M. (2006). “Experimental and analytical assessment of columns with short lap splices subjected to cyclic loads.” Ph.D. thesis, Univ. of California, Berkeley, CA.
Pantazopoulou, S. J., Bonacci, J. F., Sheikh, S., Thomas, M. D. A., and Hearn, N. (2001). “Repair of corrosion-damaged columns with FRP wraps.” J. Compos. Constr., 3–11.
Pregartner, T., Cairns, J., and Ozbolt, J. (2004). “Modelling effect of corrosion on bond strength of plain bar reinforcement.” Fib Struct. Concr., 5(3), 113–120.
Ricci, P., Verderame, G., and Manfredi, G. (2012). “ASCE/SEI 41 provisions on deformation capacity of older-type reinforced concrete columns with plain bars.” J. Struct. Eng., 04013014.
Sezen, H., and Moehle, J. P. (2004). “Shear strength model for lightly reinforced concrete columns.” J. Struct. Eng., 1692–1703.
Stanish, K., Hooton, R. D., and Pantazopoulou, S. J. (1999). “Corrosion effects on bond strength in reinforced concrete.” Struct. J., 96(6), 915–921.
Tastani, S. P., and Pantazopoulou, S. J. (2007). “Behavior of corroded bar anchorages.” Struct. J., 104(6), 756–766.
TSE (Turkish Standards Institute). (2000). “Requirements for design and construction of reinforced concrete structures.” TS 500, Ankara, Turkey.
Turkish Seismic Design Code. (2007). “Regulations for buildings to be constructed in earthquake prone areas.” Ankara, Turkey.
Vercher, J., Gil, E., Mas, A., and Cubel, F. (2014). “Analysis of the residual safety level in RC slabs with severe joist corrosion.” J. Perform. Constr. Facil., 04014112.
Wang, X. H., and Liu, X. L. (2010). “Simplified methodology for the evaluation of the residual strength of corroded reinforced concrete beams.” J. Perform. Constr. Facil., 24(2), 108–119.
Xu, G., Wei, J., Tan, T., and Liu, H. Q. (2007). “Modelling bond strength of corroded plain bar reinforcement.” Fib Struct. Concr., 8(3), 133–138.
Yalciner, H., Eren, O., and Sensoy, S. (2012). “An experimental study on the bond strength between reinforcement bars and concrete as a function of concrete cover, strength and corrosion level.” Cem. Concr. Res., 42(5), 643–655.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jan 22, 2015
Accepted: May 20, 2015
Published online: Jul 6, 2015
Discussion open until: Dec 6, 2015
Published in print: Jun 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.