Design-Phase Maintenance Checklist for Electrical Systems
Publication: Journal of Performance of Constructed Facilities
Volume 30, Issue 2
Abstract
Research has established that early attention to maintainability concerns during the design development and review stages provides a potential for delivering high levels of comfort to building occupants and reducing maintenance budgets. This paper seeks to identify and assess the set of electrical systems’ design defects that are attributed to a lack of the maintenance manager’s engagement with the design team. The research confirmed the importance of all the identified design defects based on the assessment of domain experts in the 13 public Saudi Arabian universities that operate and maintain considerable infrastructure in their campuses. The paper presents two sets of validated maintainability design review checklists for consideration by design professionals at the 60 and 90% design completion stages, in order to reduce the probability of occurrence of the identified defects. This paper serves to promote awareness among the various stakeholders in building projects about the earned benefits of maintenance managers providing their knowledge and experience of the operation and maintenance of existing facilities to design teams. It is of practical value to design professionals aiming to design maintainable, cost-effective building projects, and to have maintenance managers resolved to provide effective service to occupants and property owners.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank King Fahd University of Petroleum and Minerals for the support and facilities that made this research possible.
References
Alam, M. (2011). “Interview, maintenance engineer.” King Fahd Univ. of Petroleum and Minerals, Maintenance Dept., Dhahran, Saudi Arabia.
Arditi, D., and Nawakorawit, M. (1999). “Designing buildings for maintenance: Designers’ perspectives.” J. Archit. Eng., 107–116.
Ashizawa, K., and Omata, K. (1997). “Property of ignition mechanism caused by thermal degradation on plug.” Proc., Annual Meeting of Japan Association for Fire Science and Engineering, Japan Association of Fire Science and Engineering, Tokyo, 386–389.
Babalola, O., and Adesanya, D. A. (2008). “An appraisal of the factors affecting production of cost estimate for electrical services in Nigeria.” J. Financial Manage. Prop. Constr., 13(3), 200–208.
Babrauskas, V. (2001). “How do electrical wiring faults lead to structure ignitions?” Proc., Fire and Materials 2001 Conf., Interscience Communications, London, 39–51.
Becerik-Gerber, B., Jazizadeh, F., Li, N., and Calis, G. (2012). “Application areas and data requirements for BIM-enabled facilities management.” J. Constr. Eng. Manage., 431–442.
Brochner, J. (2003). “Integrated development of facilities design and services.” J. Perform. Constr. Facil., 19–23.
Bu Jawdeh, H., Wood, G., and Abdul-Malak, M. A. (2010). “Altering design decisions to better suit facilities management processes.” Proc., 10th Int. Conf. for Enhanced Building Operations, Kuwait Institute for Scientific Research, Kuwait, 1–10.
CCOHS (Canadian Centre for Occupational Health, and Safety). (2013). Lighting ergonomics: Light flicker, Government of Canada, Hamilton, ON, Canada.
Chew, M. Y. L. (2010). Maintainability of facilities for building professionals, World Scientific, Singapore.
De Silva, N. (2011). “Promoting the facilities management profession in the project development phase of high-rise buildings in Sri Lanka.”, 37–44.
De Silva, N., Dulaimi, M. F., Ling, F. Y. Y., and Ofori, G. (2004). “Improving the maintainability of buildings in Singapore.” Build. Environ., 39(10), 1243–1251.
DOE (Department of Energy). (2010). “Tailoring deactivation and decommissioning engineering/design activities to the requirements of DOE Order 413.3 A.” Technical Rep., Office of Environmental Management, Washington, DC.
Dominowski, R. L. (1980). Research methods, Prentice-Hall, NJ.
Douglas, J., and Ransom, B. (2007). Understanding building failures, 3rd Ed., Taylor and Francis, London.
Dunston, P. S., and Williamson, C. E. (1999). “Incorporating maintainability in constructability review process.” J. Manage. Eng., 56–60.
ECA (Electrical Contractor Association). (2014). Adequate provision of electrical sockets outlets in the home, European Association of Electrical Contractors, Kortenberg, Belgium.
Edum-Fotwe, F. T., Egbu, C., and Gibb, A. G. F. (2003). “Designing facilities management needs into infrastructure projects: Case from a major hospital.” J. Perform. Constr. Facil., 43–50.
Enoma, A. (2005). “The role of facilities management at the design stage.” Proc., 21st Annual ARCOM Conf., Vol. 1, Association of Researchers in Construction Management, London, 421–430.
Erdener, E. (2003). “Linking programming and design with facilities management.” J. Perform. Constr. Facil., 4–8.
Fledman, E. B. (1988). Building design for maintainability, McGraw-Hill, New York.
Giridharan, M. K. (2011). Electrical systems design: Data handbook, IK International Publishing House, New Delhi, India.
Green, D. L. (1999). “Electrical equipment and system maintenance procedures.” Chapter 11, Facility manager’s operation and maintenance handbook, B. T. Lewis, ed., McGraw-Hill, New York, 11.1–11.79.
Ishak, N. H., Chohan, A. H., and Ramly, A. 2007. “Implications of design deficiency on building maintenance at post-occupational stage.” J. Build. Appraisal, 3(2), 115–124.
Jensen, P. A. (2008). “Integration of considerations for facilities management in design.” Proc., CIB W096 Architectural Management and TG49 Architectural Engineering Conf.: Design Management in the Architectural Engineering and Construction Sector, International Council for Building (CIB), Rotterdam, Netherlands, 191–199.
Jensen, P. A. (2009). “Design integration of facilities management.” Archit. Eng. Des. Manage., 5(3), 124–135.
Kececioglu, D. B., (2003). Maintainability, availability, and operational readiness engineering handbook, DEStech Publications, Lancaster, PA.
Koskela, L., Huovila, P., and Leinonen, J. (2002). “Design management in building construction: From theory to practice.” J. Constr. Res., 3(1), 1–16.
Kramer, W. M. (2009). Disaster planning and control, PennWell Corporation, Tulsa, OK.
Kusko, A., and Jacobs, M. B. (2000). “The case of the faulty circuit breaker.” Electr. Constr. Maintenance, 99(10), 20–22.
LA World Airports. (2012). Design and construction handbook, City of Los Angeles, Los Angeles.
Loyd, R. (2011). Master electrician’s review: Based on the national electrical code 2011, 7th Ed., Delmar Cengage Learning, New York.
Marshall, D., Worthing, D., and Heath, R. (2009). Understanding housing defects, Estates Gazette, London.
Meng, X. (2013). “Involvement of facilities management specialists in building design: United Kingdom experience.” J. Perform. Constr. Facil., 500–507.
Merritt, F. S., and Ambrose, J. (1990). Building engineering and systems design, 2nd Ed., Van Nostrand Reinhold, New York.
NFPA (National Fire Protection Association 921). (2011). “Guide for fire and explosion investigations.”. Quincy, MA.
OSHA (Occupational Safety, and Health Administration). (2014). “Electrical safety participant guide.”, U.S. Dept. of Labor, Washington, DC.
Sanders, T., and Ritchie, S. (2008). “Defining the stages of roundabout plan detail.” Proc., National Roundabout Conf., Transportation Research Board, Washington, DC.
Seda, H. (2009). Home repair that pays off: 150 simple ways to add value without breaking your budget, Adam Media, Avon, MA.
Simmons, P. (2014). Electrical grounding and bonding: Based on the 2014 national electrical code, 4th Ed., Cengage Learning, Stamford, CT.
Wang, Y., Wang, X., Wang, J., Yung, P., and Jun, G. (2013). “Engagement of facilities management in design stage through BIM: Framework and a case study.” Adv. Civ. Eng., 8.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Oct 1, 2014
Accepted: Mar 18, 2015
Published online: May 11, 2015
Discussion open until: Oct 11, 2015
Published in print: Apr 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.