Structural Analysis of Persian Historical Brick Masonry Minarets
Publication: Journal of Performance of Constructed Facilities
Volume 30, Issue 2
Abstract
In this paper, the structural behavior of nine historical brick masonry minarets in Isfahan, which were built in the eleventh and twelfth centuries A.D., against weight, temperature, wind, and earthquakes is studied. A nonlinear three-dimensional FEM has been used. To investigate the effect of the central column and spiral staircase on the structural behavior, analyses have been performed for two cases: (1) the complete minaret, and (2) only the outer shell. The structural analysis of minarets under temperature changes shows that for certain inner and outer temperature differences, the minarets fail. Minarets do not fail because of the maximum wind velocity of Isfahan. All minarets fail when subjected to imposed earthquakes. By decreasing the minaret height or increasing the material strength, failure is delayed. Changing the failure criterion or damping ratio has little effect on the failure of the minarets.
Get full access to this article
View all available purchase options and get full access to this article.
References
ANSYS. (2011). Basic analysis guide for ANSYS 14, New York.
Bayraktar, A., Altunişik, A. C., Sevim, B., Türker, T. (2011). “Seismic response of a historical masonry minaret using a finite element model updated with operational modal testing.” J. Vib. Control, 17(1), 129–149.
Betti, M., Orlando, M., and Vignoli, A. (2011). “Static behaviour of an Italian medieval castle: Damage assessment by numerical modelling.” Comput. Struct., 89(21–22), 1956–1970.
Betti, M., and Vignoli, A. (2008). “Modelling and analysis of a Romanesque church under earthquake loading: Assessment of seismic resistance.” Eng. Struct., 30(2), 352–367.
Binda, L., Fontana, A., and Frigerio, G. (1988). “Mechanical behaviour of brick masonries derived from unit and mortar characteristics.” 8th Int. Brick and Block Masonry Conf., Elsevier Applied Science, London, 205–216.
BSI (British Standard Institute). (1997). “Loading for buildings—Part 2: Code of practice for wind loads.”, London.
Building and Housing Research Centre. (1988). Iranian code of practice for seismic resistant design of buildings: Standard No. 2800, Tehran, Iran (in Farsi).
Calderini, C., Cattari, S., and Lagomarsino, S. (2010). “The use of the diagonal compression test to identify the shear mechanical parameters of masonry.” Constr. Build. Mater., 24(5), 677–685.
Cerioni, R., Brighenti, R., and Donida, G. (1995). “Use of incompatible displacement modes in a finite element model to analyze the dynamic behavior of unreinforced masonry panels.” Comput. Struct., 57(1), 47–57.
Chen, W. F., and Han, D. J. (1988). Plasticity for structural engineers, Springer, New York.
Consiglio dei Ministri. (2005). “Technical rules for the design, the assessment and the seismic upgrade of buildings.”, Rome (in Italian).
Del Coz Díaz, J. J., García Nieto, P. J., Álvarez Rabanal, F. P., and Lozano Martínez-Luengas, A. (2011a). “Design and shape optimization of a new type of hollow concrete masonry block using the finite element method.” Eng. Struct., 33(1), 1–9.
Del Coz Díaz, J. J., Lozano Martínez-Luengas, A., Adam, J. M., and Martín Rodríguez, A. (2011b). “Non-linear hygrothermal failure analysis of an external clay brick wall by FEM—A case study.” Constr. Build. Mater., 25(12), 4454–4464.
Dogangun, A., Acar, R., Sezen, H., and Livaoglu, R. (2008). “Investigation of dynamic response of masonry minaret structures.” Bull. Earthquake Eng., 6(3), 505–517.
Drucker, D. C., and Prager, W. (1952). “Soil mechanics and plastic analysis for limit design.” Q. Appl. Math., 10(2), 157–165.
EU (European Union)-India Economic Cross Cultural Programme. (2006a). Benchmarking on the seismic behaviour of the Qutb Minar, Rome.
EU (European Union)-India Economic Cross Cultural Programme. (2006b). Guidelines for the conservation of historical masonry structures in seismic areas, Rome.
Fanning, P. J., and Boothby, T. A. (2001). “Three-dimensional modeling and full scale testing of stone arch bridges.” Comput. Struct., 79(29–30), 2645–2662.
Hejazi, M. (1997). Historical buildings of Iran: Their architecture and structure, Computational Mechanics Publications, Southampton, U.K.
Hejazi, M., and Mehdizadeh Saradj, F. (2014a). Persian architectural heritage: Architecture, WIT, Southampton, U.K.
Hejazi, M., and Mehdizadeh Saradj, F. (2014b). Persian architectural heritage: Conservation, WIT, Southampton, U.K.
Hejazi, M., and Mehdizadeh Saradj, F. (2014c). Persian architectural heritage: Structure, WIT, Southampton, U.K.
ISCARSAH (International Committee on Analysis and Restoration of Structures of Architectural Heritage). (2005). Recommendations for the analysis and restoration of historical structures, Paris.
Korany, Y. (2003). “Mechanics and modeling of URM structures.” Proc. Int. Short Course on Architectural and Structural Design of Masonry, Dresden Univ. of Technology, Dresden, Germany.
Luciano, R., and Sacco, E. (1997). “Homogenization technique and damage model for old masonry material.” Int. J. Solids Struct., 34(24), 3191–3208.
Ministry of Housing and Urbanism. (2009). Iranian national building regulations: Loads, Tehran, Iran (in Farsi).
Moayedian, S. M. (2013). “Structural analysis of Persian historical brick masonry minarets.” M.S. thesis, Univ. of Isfahan, Isfahan, Iran (in Farsi).
Moghiman, M. (2003). Air conditioning and central heating engineering, Ferdowsi University Press, Mashhad, Iran (in Farsi).
National Weather Service. (2003). Historical tornadoes, Toronto.
Oliveira, C. S., Çakt, E., Stengel, D., and Branco, M. (2012). “Minaret behavior under earthquake loading: The case of historical Istanbul.” Earthquake Eng. Struct. Dyn., 41(1), 19–39.
Pallarés, F. J., Ivorra, S., Pallarés, L., and Adam, J. M. (2011). “State of the art of industrial masonry chimneys: A review from construction to strengthening.” Constr. Build. Mater., 25(12), 4351–4361.
Peña, F., Lourenço, P. B., Mendes, N., and Oliveira, D. V. (2010). “Numerical models for the seismic assessment of an old masonry tower.” Eng. Struct., 32(5), 1466–1478.
Pineda, P., Robador, M., and Gil-Marti, M. (2011). “Seismic damage propagation prediction in ancient masonry structures: An application in the non-linear range via numerical models.” Open Constr. Build. Technol. J., 5(S1-M4), 71–79.
Silva, W. (2012). “Strong motion database.” 〈http://peer.berkeley.edu/smcat/index.html〉 (Mar. 27, 2012).
Willam, K. J., and Warnke, E. P. (1975). “Constitutive models for the triaxial behavior of concrete.” Proc. Int. Assoc. Bridge Struct. Eng., 19, 1–30.
Zucchini, A., and Lourenço, P. B. (2007). “Mechanics of masonry in compression: Results from a homogenisation approach.” Comput. Struct., 85(3–4), 193–204.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Dec 23, 2013
Accepted: Dec 26, 2014
Published online: Jan 29, 2015
Discussion open until: Jun 29, 2015
Published in print: Apr 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.