Determination of Prestressing Force in Railway Concrete Sleepers Using Dynamic Relaxation Technique
Publication: Journal of Performance of Constructed Facilities
Volume 29, Issue 5
Abstract
Prestressed concrete sleepers (or railroad ties) are designed to carry and transfer the wheel loads from the rails to the track foundation. Over a period of time, a railway track could experience various types of static and dynamic loading conditions, which are attributable to commercial train operations. Previous studies have established two main limit states for the design consideration of concrete sleepers: ultimate limit states under extreme impact and fatigue limit states under repeated probabilistic impact loads. Prestressed concrete has played a significant role in maintaining the high endurance of the sleepers under low to moderate repeated impact loads. Despite the most common use of the prestressed concrete sleepers in railway tracks, their remaining lives are not deeply appreciated nor taken into account for track maintenance and renewal. The present experimental investigation was aimed at determining the residual prestressing force of railway concrete sleepers after revenue services using the dynamic relaxation technique. Fifteen sleepers were extracted from a heavy-haul rail network for testing using experimental facilities at the University of Wollongong in Australia. The structural evaluation program included quasi-static bending tests, dynamic impact tests, and tests to establish the current level of prestress in the steel wires using the dynamic relaxation technique. Two of the sleepers were evaluated for the level of prestressing forces in accordance with Australian standards. It was found that the level of prestress determined using the dynamic relaxation technique was significantly lower than that expected from the theoretical analysis of time-dependent prestressing losses for the concrete sleepers.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful to Australian Rail Track Corporation (ARTC), Sydney Trains (Wollongong Maintenance Depot), and sleeper manufacturer ROCLA for support throughout this study. Valuable comments and support from Drs. M. H. Murray and R. Blomsvik are acknowledged. The authors would like to thank the Structural Lab Manager Alan Grant for his assistance during the experiments. Also, the second author wishes to thank the Australian Government’s Department of Innovation for supporting his Endeavour Executive Fellowships at the Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts; at John F. Kennedy School of Government, Harvard University, Cambridge, Massachusetts; and at Railway Mechanics Centre, Chalmers University of Technology, Gothenburg, Sweden.
References
Esveld, C. (2001). Modern railway track, MRT Press, Zaltbommel, The Netherlands.
Gustavson, R. (2002). “Structural behaviour of concrete railway sleepers.” Ph.D. thesis, Dept. of Structural Engineering, Chalmers Univ. of Technology, Gothenburg, Sweden.
Kaewunruen, S. (2007). “Experimental and numerical studies for evaluating dynamic behaviour of prestressed concrete sleepers subject to severe impact loading.” Ph.D. thesis, School of Civil, Mining, and Environmental Engineering, Univ. of Wollongong, NSW, Australia.
Kaewunruen, S., and Remennikov, A. M. (2008). “Nonlinear transient analysis of railway concrete sleepers in track systems.” Int. J. Struct. Stab. Dyn., 8(3), 505–520.
Kaewunruen, S., and Remennikov, A. M. (2009). “Progressive impact behaviours of prestressed concrete sleepers in railway track environments.” Eng. Struct., 31(10), 2460–2473.
Kaewunruen, S., and Remennikov, A. M. (2010). “Dynamic crack propagations of prestressed concrete sleepers in railway track systems subjected to severe impact loads.” J. Struct. Eng., 749–754.
Kaewunruen, S., and Remennikov, A. M. (2013). “On the residual energy toughness of prestressed concrete sleepers in railway track structures subjected to repeated impact loads.” Electron. J. Struct. Eng., 13(1), 41–61.
Kaewunruen, S., Remennikov, A. M., Aikawa, A., and Sakai, H. (2014). “Free vibrations of interspersed railway track systems in three-dimensional space.” Acoust. Aust., 42(1), 20–26.
Leong, J. (2007). “Development of a limit state design methodology for railway track.” M.E. thesis, Queensland Univ. of Technology, QLD, Australia.
Lundqvist, P. (2012). “Assessment of long-term losses in prestressed concrete structures.” Ph.D. thesis, Lund Univ., Lund, Sweden.
Nawy, E. G. (1996). Prestressed concrete: A fundamental, Prentice Hall, Upper Saddle River, NJ.
Otter, J. R. H., Cassell, A. C., and Hobbs, R. E. (1966). “Dynamic relaxation.” ICE Proc., 35(4), 633–656.
Remennikov, A. M., and Kaewunruen, S. (2008). “A review on loading conditions for railway track structures due to wheel and rail vertical interactions.” Struct. Control Health Monit., 15(2), 207–234.
Saiidi, M., Douglas, B., and Feng, S. (1994). “Prestress force effect on vibration frequency of concrete bridges.” J. Struct. Eng., 2233–2241.
Standards Australia. (1991). “Method of testing concrete—Method for securing and testing cores from hardened concrete for compressive strength.” AS1012.14-1991, Sydney, Australia.
Standards Australia. (1999). “Method of testing concrete—Determination of the compressive strength of concrete specimens.” AS1012.9-1999, Sydney, Australia.
Standards Australia. (2001a). “Design of concrete structures.” AS3600-2001, Sydney, Australia.
Standards Australia. (2001b). “Railway track material—Part 19: Resilient fastening systems.” Australian Standard: AS1085.19-2001, Sydney, Australia.
Standards Australia. (2003). “Railway track material—Part 14: Prestressed concrete sleepers.” AS1085.14-2003, Sydney, Australia.
Wakui, H., and Okuda, H. (1999). “A study on limit-state design for prestressed concrete sleepers.” Concr. Lib. JSCE, 33(1), 1–25 .
Wang, N. (1996). “Resistance of concrete railroad ties to impact loading.” Ph.D. thesis, Univ. of British Columbia, Canada.
Warner, R. F., Rangan, B. V., Hall, A. S., and Faulkes, K. A. (1998). Concrete Structures, Addison Wesley Longman, Melbourne, Australia.
Xe, X. (1994). “Effect of loading rate and support conditions on the mode of failure of prestressed concrete railroad ties subjected to impact loading.” Cement Concr. Res., 24(7), 1286–1298.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Nov 12, 2013
Accepted: May 16, 2014
Published online: Sep 11, 2014
Discussion open until: Feb 11, 2015
Published in print: Oct 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.