Experimental and Numerical Investigations of Groove Connections for a Novel Timber-Concrete-Composite System
Publication: Journal of Performance of Constructed Facilities
Volume 28, Issue 6
Abstract
The development of hybrid structures is constantly being pushed forward because of the need for more efficient components that incorporate multiple functions. Structural requirements lead to state-of-the-art timber-concrete-composite (TCC) floor systems, which consist of a concrete layer on top of timber beams or decks. In bending, the TCC concrete layer is in compression and the timber is in tension. When multifunctionality requirements such as building physics or fire protection are added, other solutions of the structural form of hybrid systems can emerge that challenge common engineering conceptions. This paper presents research on the connection system of a novel TCC setup that integrates thermal and fire protection functionality, in which timber beams are placed at the top and a concrete layer at the bottom. The results from full-scale bending tests, and shear and tension tests on a subsection of the system, show that the grooves cut into the timber beams transmit the shear forces and sufficiently connect the concrete deck vertically to the timber. Subsequently, the structural behavior was numerically modeled and the agreement between experimental and numerical results allow for the validated model to be used for geometric optimizations, and predicting the performance of optimized systems.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research reported in this paper was funded by the Swiss Commission for Technology and Innovation (CTI) and carried out in collaboration with Renggli AG, Pirmin Jung Ingenieure für Holzbau AG, Makiol+Wiederkehr Holzbau-Ingenieure, Jomos Gruppe, and Rekag AG. The help of the technicians at the Tech Park of the Bern University of Applied Sciences in Biel is acknowledged.
References
Ansys. (2011). “Documentation for Ansys.” 〈http://www.ansys.com〉 (May 12, 2014).
Ansys 11 [Computer software]. Cecil Township, PA, Ansys.
Brunner, M., Romer, M., and Schnüriger, M. (2007). “Timber-concrete-composite with an adhesive connector (wet on wet process).” Mater. Struct., 40(1), 119–126.
Ceccotti, A. (2002). “Composite concrete-timber structures.” Prog. Struct. Eng. Mater., 4(3), 264–275.
Ceccotti, A., Fragiacomo, M., and Giordano, S. (2007). “Long-term and collapse tests on a timber-concrete composite beam with glued-in connection.” Mater. Struct., 40(1), 15–25.
European Committee for Standardization (CEN). (1991). “Timber structures, joints made with mechanical fasteners, general principles for the determination of strength and deformation characteristics.” EN-26891, Brussels, Belgium.
European Committee for Standardization (CEN). (2004). “Eurocode 5: Design of timber structures–Part 1-1: General–Common rules and rules for buildings.” EN 1995-1-1:2004, Brussels, Belgium.
Clouston, P., Bathon, L., and Schreyer, A. (2005). “Shear and bending performance of a novel wood-concrete composite system.” J. Struct. Eng., 1404–1412.
Clouston, P., and Schreyer, A. (2008). “Design and use of wood-concrete composites.” Pract. Period. Struct. Des. Constr., 167–174.
Dias, A. M. P. G. (2005). “Mechanical behaviour of timber-concrete joints.” Ph.D. thesis, Univ. of Coimbra, Coimbra, Portugal.
Fragiacomo, M. (2005). “A finite element model for long-term analysis of timber-concrete composite beams.” Struct. Eng. Mech., 20(2), 173–179.
Fragiacomo, M. (2006). “Long-term behavior of timber-concrete composite beams. II: Numerical analysis and simplified evaluation.” J. Struct. Eng., 23–33.
Fragiacomo, M., Gutkowski, R. M., Balogh, J., and Fast, R. S. (2007). “Long-term behavior of wood-concrete composite floor/deck systems with shear key connection detail.” J. Struct. Eng., 1307–1315.
Frangi, A., Knobloch, M., and Fontana, M. (2010). “Fire design of timber-concrete composite slabs with screwed connections.” J. Struct. Eng., 219–228.
Godycki, T., Pawlika, J., and Kleszczewski, J. (1984). Composite floor of timber beams and concrete plate, Bauingenieur, Berlin (in German).
Grosse, M. (2005). “Numercial simulation of non-linear short-term performance of softwood on the example of timber-concrete-composites.” Doctoral dissertation, Bauhaus Univ. Weimar, Weimar, Germany (in German).
Gustafsson, P. J. (2003). “Crack propagation in wood and wood products.” Proc., Int. Conf. of the European Society for Wood Mechanics, European Society for Wood Mechanics, 227–236.
Gutkowski, R., Balogh, J., and To, L. G. (2010). “Finite element modeling of short-term field response of composite wood-concrete floors/decks.” J. Struct. Eng., 707–714.
Hehl, S., Vallée, T., Tannert, T., and Bai, Y. (2010). “A probabilistic strength prediction method for adhesively bonded joints composed of wooden adherends.” Key Eng. Mater., 417, 533–536.
Negrão, J., Leitão de Oliveira, C., Maia de Oliveira, F., and Cachim, P. (2010). “Glued composite timber-concrete beams. I: Interlayer connection specimen tests.” J. Struct. Eng., 136(10), 1236–1245.
Hollenbach, J. (2000). “Comparative study of timber-concrete-composite slabs in terms of functionality and cost-effectiveness.” Diplom thesis, Univ. of Stuttgart, Germany (in German).
Lehmann, S. (2004). “Studies on the evaluation of composite components from board stack elements in the composite surface with mineral layers.” Doctoral dissertation, Bauhaus Univ. Weimar, Weimar, Germany (in German).
Meena, R., Schollmayer, M., and Tannert, T. (2013). “Experimental and numerical investigations on the fire-resistance of a novel timber-concrete-composite deck.” J. Perform. Constr. Facil, A4014009.
Michelfelder, B. C. (2006). “Behavior of groove connections in nail-laminated-timber-concrete composite floors.” Dissertation, Univ. of Stuttgart, Germany (in German).
Möhler, K. (1956). “About the structural behavior of beams and struts with composite cross-sections and flexible connection means.” Habilitation, Technische Univ. Karlsruhe, Germany (in German).
Montgomery, D. C., and Runger, G. C. (2003). Applied statistics and probability for engineers, 3rd Ed., Wiley, New York.
Natterer, J. K. (2002). “New technologies for engineered timber structures.” Prog. Struct. Eng. Mater., 4(3), 245–263.
Norris, C. B. (1962). “Strength of orthotropic materials subjected to combined stresses.”, Forest Products Laboratory, Madison, WI.
O’Neill, J., Carradine, D. M., Moss, P. J., Fragiacomo, M., Dhakal, R., and Buchanan, A. H. (2011). “Design of timber-concrete composite floors for fire resistance.” J. Struct. Fire Eng., 2(3), 230–242.
Poštulka, J. (1997). “Timber-concrete composite floors, experience of 36 years.” Bautechnik, 74(7), 478–480 (in German).
Swiss Society of Engineers and Architects (SIA). (2003). “Composite steel and concrete structures.”, Zurich, Switzerland.
Swiss Society of Engineers and Architects (SIA). (2004). “Timber structures.”, Zurich, Switzerland.
Tannert, T., Lam, F., and Vallée, T. (2010). “Strength prediction for rounded dovetail connections considering size effects.” J. Eng. Mech., 358–366.
Tannert, T., Lam, F., and Vallée, T. (2011). “Structural performance of rounded dovetail connections: Experimental and numerical investigations.” Eur. J. Wood Wood Prod., 69(3), 471–482.
Tannert, T., Vallée, T., and Hehl, S. (2012). “Probabilistic strength prediction of adhesively bonded timber joints.” Wood Sci. Technol., 46(1–3), 503–513.
Vallée, T., Correia, J. R., and Keller, T. (2006). “Probabilistic strength prediction for double lap joints composed of pultruded GFRP profiles–Part II: Strength prediction.” Compos. Sci. Technol., 66(13), 1915–1930.
Vallée, T., Tannert, T., and Ganne-Chedville, C. (2012). “Capacity prediction of welded timber joints.” Wood Sci. Technol., 46(1–3), 333–347.
Vallée, T., Tannert, T., and Hehl, S. (2011). “Experimental and numerical investigations on full-scale adhesively bonded timber trusses.” Mater. Struct., 44(10), 1745–1758.
Vallée, T., Tannert, T., Meena, R., and Hehl, S. (2013). “Dimensioning method for bolted, adhesively bonded, and hybrid joints.” Compos. Part B Eng., 46, 179–187.
Van der Linden, M. (1999). “Timber-concrete composite floor systems.” Doctoral dissertation, Technical Univ. of Delft, Delft, Netherlands.
Weibull, W. (1939). “A statistical theory of strength of materials.”, Royal Swedish Institute, Stockholm, Sweden.
Xavier, J. C., Garrido, N. M., Oliveira, M., Morais, J. L., Camanho, P. P., and Pierron, F. (2004). “A comparison between the Iosipescu and off-axis shear test methods for the characterization of Pinus Pinaster Ait.” Compos. Part A Appl. Sci. Manuf., 35(2), 827–840.
Yeoh, D., Fragiacomo, M., De Franceschi, M., and Buchanan, A. (2011a). “Experimental tests of notched and plate connectors for LVL-concrete composite beams.” J. Struct. Eng., 261–269.
Yeoh, D., Fragiacomo, M., De Franceschi, M., and Heng Boon, K. (2011b). “State of the art on timber-concrete composite structures: Literature review.” J. Struct. Eng., 1085–1095.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: May 20, 2013
Accepted: Nov 19, 2013
Published online: Nov 21, 2013
Published in print: Dec 1, 2014
Discussion open until: Dec 18, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.