Damage Assessment of Connections Used in Cross-Laminated Timber Subject to Cyclic Loads
Publication: Journal of Performance of Constructed Facilities
Volume 28, Issue 6
Abstract
Cross-laminated timber (CLT) products are gaining popularity in the North American market and are being used in midrise wood buildings, in particular, in shearwall applications. Shearwalls provide resistance to lateral loads such as wind and earthquake loads, and therefore it is important to gain a better understanding of the behavior of CLT shearwall systems during earthquake events. This paper is focused on the seismic performance of connections between CLT shearwall panels and the foundation. CLT panels are very stiff and energy dissipation is accomplished by the connections. A literature review on previous research work related to damage prediction and assessment for wood frame structures was performed. Furthermore, a test program was conducted to investigate the performance of CLT connections subjected to simulated earthquake loads. Two different brackets in combination with five types of fasteners were tested under monotonic and cyclic loading protocols. In total, 98 connection tests were conducted and the monotonic load-displacement curves and hysteretic loops were obtained. In this paper, an energy-based cumulative damage assessment model was calibrated with the CLT connection test data. Finally, a correlation between the damage index and physical damage is provided.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported through funding from the Natural Sciences and Engineering Research Council of Canada (NSERC) Strategic Network on Innovative Wood Products and Building Systems (NEWBuildS) and the Steel Structures Education Foundation (SSEF).
References
ASTM. (2009). “Standard test methods for cyclic (reversed) load test for shear resistance of walls for buildings.” ASTM E2126-11, West Conshohocken, PA.
Banon, H., Biggs, J., and Irvine, H. (1981). “Seismic damage in reinforced concrete frames.” J. Struct. Eng., 1713–1729.
Bannon, H., and Veneziano, D. (1982). “Seismic safety of reinforced concrete members and structures.” Earthquake Eng. Struct. Dyn., 10(4), 179–193.
Blass, H. J., and Uibel, T. (2007). “Edge joints with dowel type fasteners in cross laminated timber.” Paper 40-7-2. Proc., of CIB-W18 Timber Eng., Univ. of Karlsruhe, Karlsruhe, Germany.
British Columbia Building Code (BCBC). (2010). British Columbia Building Code, QP Publication Services.
Ceccotti, A., Lauriola, M., Pinna, M., and Sandhaas, C. (2006). SOFIE project—Cyclic tests on cross-laminated wooden panels, San Michele all’Adige, Italy.
Comite Europeen de Normalisation. (2011). “Timber structures, test methods, racking strength and stiffness of timber frame wall panels.” EN 594:2011.
Cosenza, E., and Manfredi, G. (2000). “Damage indices and damage measures.” Pro. Struct. Eng. Mater., 2(1), 50–59.
Dickof, C., Stiemer, S., Tesfamariam, S., and Wu, D. (2012). “Wood-steel hybrid seismic force resisting systems: Seismic ductility.” World Conf. for Timber Engineering, Curran Associates, Auckland, New Zealand, 104–111.
Dujic, B., Pucelj, J., and Zarnic, R. (2004). Testing of racking behavior of massive wooden wall panels, Proc., of CIB-W18/37-15-2, Edinburgh, Scotland.
Fajfar, P., and Vidic, T. (1994). “Consistent inelastic design spectra: Hysteretic and input energy.” Earthquake Eng. Struct. Dyn., 23(5), 523–537.
Gosain, N. K., Brown, R. H., and Jirsa, J. O. (1977). “Shear requirements for load reversals on RC members.” J. Struct. Eng., 103(7), 1461–1476.
Johansen, K. W. (1949). “Theory of timber connections.” Int. Assoc. Bridge Struct. Eng., 9, 249–262.
Kraetzig, W., Meyer, I., and Meskouris, K. (1989). “Damage evolution in reinforced concrete members under cyclic loading.” 5th Int. Conf. on Structural Safety and Reliability, ASCE, Reston, VA, 795–802.
Krawinkler, H., Parisi, F., Ibarra, L., Ayoub, A., and Medina, R. (2000). “Development of a testing protocol for woodframe structures.” CUREE Publication No. W-02.
Liang, H., Wen, Y.-K., and Foliente, G. C. (2011). “Damage modeling and damage limit state criterion for wood-frame buildings subjected to seismic loads.” J. Struct. Eng., 41–48.
Park, Y., Ang, A. (1985). “Mechanistic seismic damage model for reinforced concrete.” J. Struct. Eng., 111(4), 722–739.
Popovski, M., Schneider, J., and Schweinsteiger, M. (2010). “Lateral load resistance of cross-laminated wood panels.” World Conf. of Timber Engineering, Riva del Garda.
Rainer, J., and Karacabeyli, E. (1999). “Wood-frame construction: Meeting the challenge of earthquakes.” Building Performance Series No. 5, Canadian Wood Council, Ottawa, Canada.
Rosowsky, D., and Ellingwood, B. (2002). “Performance-based engineering of wood frame housing: Fragility analysis methodology.” J. Struct. Eng., 32–38.
Schneider, J., Stiemer, S. F., Tesfamariam, S., Karacabeyli, E., and Popovski, M. (2012). “Damage assessment of cross laminated timber connections subjected to simulated earthquake loads.” World Conf. on Timber Engineering, I, Curran Associates, Auckland, New Zealand, 398–406.
Slavid, R. (2005). Wood architecture, Laurence King, London.
Stiemer, S. F., Dickof, C., and Tesfamariam, S. (2012). “Wood-steel hybrid seismic force resisting systems: Seismic analysis and response.” 10th Int. Conf. on Advances in Steel Concrete Composite and Hybrid Structures, Research Publishing Services, Singapore.
van de Lindt, J. (2005). “Damaged-based seismic reliability concept for woodframe structures.” J. Struct. Eng., 668–675.
Wang, M., and Shah, S. (1987). “Reinforced concrete hysteresis model based in the damage concept.” Earthquake Eng. Struct. Dyn., 15(8), 993–1003.
Williams, M. S., and Sexsmith, R. G. (1995). “Seismic damage indices for concrete structures: A state-of-the-art review.” Earthquake Spectra, 11(2), 319–349.
Wong, K. K., and Wang, Y. (2001). “Probabilistic structural damage assessment and control based on energy approach.” Struct. Des. Tall Build., 10(4), 283–308.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: May 11, 2013
Accepted: Oct 18, 2013
Published online: Oct 25, 2013
Published in print: Dec 1, 2014
Discussion open until: Dec 14, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.