Postoccupancy Performance Evaluation of Time-of-Installation Factors: Seven-Year Study of SPF Roofing
Publication: Journal of Performance of Constructed Facilities
Volume 29, Issue 2
Abstract
Over the past couple of decades, quality has been an area of increased focus. Multiple models and approaches have been proposed to measure the quality in the construction industry. This paper focuses on determining the quality of one of the types of roofing systems used in the construction industry, i.e., sprayed polyurethane foam roofs (SPF roofs). Thirty-seven urethane-coated SPF roofs that were installed in 2005/2006 were visually inspected to measure the percentage of blisters and repairs three times over a period of four years, six years, and seven years. A repairing criteria was established after a six-year mark based on the data that were reported to contractors as vulnerable roofs. Furthermore, the relation between four possible contributing time-of-installation factors—contractor, demographics, season, and difficulty (number of penetrations and size of the roof in square feet) that could affect the quality of the roof was determined. Demographics and difficulty did not affect the quality of the roofs, whereas the contractor and the season when the roof was installed did affect the quality of the roofs.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahmed, A. A., Williams, T., Hibberd, P., and Gronow, S. (1998). “Measuring the effectiveness of quality assurance systems in the construction industry.” Property Manage., 16(4), 222–228.
Alumbaugh, R. L., and Humm, E. F. (1984). “Experimental polyurethane foam roof systems.” J. Cell. Plast., 20(4), 257–273.
Bailey, D., and Bradford, D. (2005). “Membrane and flashing defects in low-slope roofing: Causes and effects on performance.” J. Perform. Constr. Facil., 234–243.
Bassioni, H., Price, A., and Hassan, T. (2004). “Performance measurement in construction.” J. Manage. Eng., 42–50.
Burati, J. L., Mathews, M. F., and Kalidindi, S. N. (1991). “Quality management in the construction industry.” J. Constr. Eng. Manage., 341–359.
Chong, W., and Low, S. (2005). “Assessment of defects at construction and occupancy stages.” J. Perform. Constr. Facil., 283–289.
Coffelt, D., Hendrickson, C., and Healey, S. (2010). “Inspection, condition assessment, and management decisions for commercial roof systems.” J. Archit. Eng., 94–99.
Flynn, B. B., Schroeder, R. G., and Sakakibara, S. (1994). “A framework for quality management research and an associated measurement instrument.” J. Oper. Manage., 11(4), 339–366.
Forbes, L. H. (2002). “Continuous learning in construction through quality-based post occupancy evaluation.” Proc., IIE Annual Conf., 1–7.
Gajjar, D. R., Kashiwagi, D. T., and Kashiwagi, J. (2012). “Manufacturer’s new approach to risk.” Proc., Construction, Building and Real Estate Conf., Las Vegas, NV, 1859–1868.
Garcez, N., Lopes, N., De Brito, J., and Sá, G. (2012). “Pathology, diagnosis and repair of pitched roofs with ceramic tiles: Statistical characterisation and lessons learned from inspections.” Constr. Build. Mater., 36, 807–819.
Garcez, N., Lopes, N., De Brito, J., Sá, G., and Silvestre, J. (2013). “The influence of design on the service life of pitched roofs’ cladding.” J. Perform. Constr. Facil., (Apr. 1, 2013).
Gopal, K. K., and Wong, A. (1998). “Quality culture in the construction industry.” Total Qual. Manage., 9(4–5), S113–S140.
Hart, J. A. (2005). “Construction quality management system.” Proc., ASQ World Conf. on Quality and Improvement, 59, 353–360.
Horowitz, D. (2001). “Construction quality.” Prof. Builder, 65(8), 35.
Jaegermann, C., Puterman, M., and Haviv, E. (1989). “Blistering of membranes over foam-concrete roofs.” J. Mater. Civ. Eng., 31–45.
Kashiwagi, D. (2011). PIPS / PIRMS: The best value standard, 11th Ed., KSM, Tempe, AZ.
Kashiwagi, D. T., and Tisthammer, T. (2002). “Information based delivery system for sprayed polyurethane foam on roofing.” J. Therm. Envelope Build. Sci., 26(1), 33–52.
Knowles, M. (2005). “Specifying SPF roofing systems.” 〈http://www.buildings.com/article-details/articleid/2753/title/specifying%20spf%20roofing%20systems.aspx〉 (Apr. 17, 2013).
Kuprenas, J. A. (2008). “Influence of quality on construction costs.” AACE International Transactions, CSC.05.1–CSC.05.9.
Lavy, S. (2011). “A literature review on measuring building performance by using key performance indicators.” AEI 2011: Building integration solutions, ASCE, Reston, VA, 406–417.
Lewis, B. R. (1993). “Service quality measurement.” Bus. Econ. Market. Purchasing, 11(4), 4–12.
Lin, G., Shen, G., Sun, M., and Kelly, J. (2011). “Identification of key performance indicators for measuring the performance of value management studies in construction.” J. Constr. Eng. Manage., 698–706.
Low, S. P., and Hennie, F. O. (1997). “The effective maintenance of quality management systems in the construction industry.” Int. J. Qual. Reliab. Manag., 14(8), 768–790.
Newton, L., and Christian, J. (2006). “Impact of quality on building costs.” J. Infrastruct. Syst., 199–206.
Sharara, L. M., Jordan, J. W., and Kimble, R. A. (2009). “Residential roofing evaluation.” Forensic Engineering 2009: Pathology of the Built Environment, 184–193.
Shiramizu, S., and Singh, A. (2007). “Leadership to improve quality within an organization.” Leadership Manage. Eng., 129–140.
Solomon, J. (2011). “Problems with spray foam insulation Javic Homes Blog [web log post].” 〈http://javichomes.wordpress.com/2011/07/12/problems-with-spray-foam-insulation〉 (Mar. 15, 2013).
Sower, V., and Fair, F. (2005). “There is more to quality than continuous improvement: Listening to Plato.” Qual. Manage. J., 12(1), 8–20.
Stevens, J., Glagola, C., and Ledbetter, W. (1994). “Quality-measurement matrix.” J. Manage. Eng., 30–35.
Stukhart, G. (1989). “Construction materials quality management.” J. Perform. Constr. Facil., 100–112.
Sullivan, K. (2011). “Quality management programs in the construction industry: Best Value compared with other methodologies.” J. Manage. Eng., 210–219.
Tam, V., Le, K., and Le, H. (2008). “Using gaussian and hyperbolic distributions for quality improvement in construction: Case study approach.” J. Constr. Eng. Manage., 555–561.
Vecchi, A., and Brennan, L. (2009). “Quality management: a cross-cultural perspective.” Cross Cultural Manage., 16(2), 149–164.
Wicks, A. M., and Roethlein, C. J. (2009). “A satisfaction-based definition of quality.” J. Bus. Econ. Stud., 15(1), 82–97.
Yang, H., Yeung, J. F. Y., Chan, A. P. C., Chiang, Y. H., and Chan, D. W. M. (2010). “A critical review of performance measurement in construction.” J. Facil. Manage., 8(4), 269–284.
Zbranek, S. (2000). “Quality construction—Part 1: Defining quality construction.” Prof. Builder, 65(8), 77–80.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Mar 7, 2013
Accepted: Jul 22, 2013
Published online: Jul 24, 2013
Discussion open until: Dec 9, 2014
Published in print: Apr 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.