Simplified Experimental Evaluation of Floors Subject to Walking-Induced Vibration
Publication: Journal of Performance of Constructed Facilities
Volume 28, Issue 5
Abstract
When occupants complain of lively floor motion due to human activity, it is often necessary to estimate the dynamic properties of the floor and ascertain the form and level of vibration response toward the goal of designing an effective retrofit solution. The most detailed and accurate experimental method is to determine the natural vibration modes using full experimental modal analysis, which requires substantial equipment including at least one floor shaker, and then determine the acceleration due to walking. However, due to cost and time constraints and possible unacceptable occupant disruption, it may not be possible to perform a full experimental modal analysis. An alternative testing procedure is to use a handheld spectrum analyzer to record floor accelerations due to heel drop and timed walking excitations. These measurements are then used to estimate the natural frequencies and vibration response level, respectively. This paper describes the procedure and compares results with experimental modal analysis techniques. The method is illustrated by a case study of an in-service floor and is shown to be economical, convenient, and effective.
Get full access to this article
View all available purchase options and get full access to this article.
References
Barrett, A. R. (2006). “Dynamic testing of in-situ composite floors and evaluation of vibration serviceability using the finite element method.” Ph.D. dissertation, Virginia Polytechnic Institute and State Univ., Blacksburg, VA.
Brownjohn, J. M. W., Pavic, A., and Omenzetter, P. (2004). “A spectral density approach for modeling continuous vertical forces on pedestrian structures due to walking.” Can. J. Civ. Eng., 31(1), 65–77.
CSI. (2011). SAP2000—linear and nonlinear static and dynamic analysis and design of three-dimensional structures—User’s manuals, version 15, Computers and Structures, Berkeley, CA.
Davis, D. B. (2008). “Finite element modeling for prediction of low frequency floor vibrations due to walking.” Ph.D. dissertation, Virginia Polytechnic Institute and State Univ., Blacksburg, VA.
Hanagan, L. M., Raebel, C. H., and Trethewey, M. W. (2003). “Dynamic measurements of in-place steel floors to assess vibration performance.” J. Perform. Constr. Facil., 126–135.
Murray, T. M., Allen, D. E., and Unger, E. E. (1997). Steel design guide series 11: Floor vibrations due to human activity, American Institute of Steel Construction, Chicago, IL.
Smith, A. L., Hicks, S. J., and Devine, P. J. (2007). Design of floors for vibration: A new approach (SCI P354), The Steel Construction Institute, Silwood Park, Ascot, Berkshire.
Willford, M., Young, P., and Field, C. (2007). “Predicting footfall-induced vibration: Part I.” Struct. Build., 160(SB2), 65–72.
Zivanovic, S., Pavic, A., and Reynolds, P. (2006). “Probability-based prediction of multi-mode vibration response to walking excitation.” Eng. Struct., 29(6), 942–954.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Sep 28, 2012
Accepted: Apr 30, 2013
Published online: May 2, 2013
Published in print: Oct 1, 2014
Discussion open until: Nov 2, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.