Performance-Based Design for a Tall-Pier Bridge Prototype in Massive Earthquakes
Publication: Journal of Performance of Constructed Facilities
Volume 27, Issue 5
Abstract
This study aims to determine a cost-effective design for mitigating the dynamic response of multispan tall-pier bridges subjected to longitudinal seismic excitation. Time history solutions are provided for a dynamic system of discrete and finite elements which models sliding friction, collision contact, and nonlinear behaviors. The approach involves conducting vulnerability tests on parametric models comprising various parameters for piers, bearings, and backfill soils. The bridge prototype as evolved combines the use of adapted rubber bearings and cemented backfill. It satisfied specified performance criteria without structural damage under six strong motions from the Kobe and Chi-Chi earthquakes. The margins of safety and serviceability were ensured by a statistical analysis considering the uncertainty of backfill and bearing properties.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (1977). “Standard specifications for highway bridges.” Washington, DC.
Applied Technology Council (ATC). (1996). “Seismic evaluation and retrofit of concrete buildings.” Vol. 1., ATC-40, Redwood City, CA.
Basha, B. M., and Babu, G. L. S. (2010). “Optimum design of bridge abutments under seismic conditions: Reliability-based approach.” J. Bridge Eng., 15(2), 183–195.
CALTRANS. (2006). “Seismic design criteria.” Sacramento, CA.
Choudhury, D., and Nimbalkar, S. S. (2006). “Pseudo-dynamic approach of seismic active earth pressure behind retaining wall.” Geotech. Geol. Eng., 24(5), 1103–1113.
Coduto, D. P. (2001). Foundation analysis and design principles and practices, Prentice Hall, New Jersey.
Earthquake Engineering Research Institute (EERI). (1995). The Hyogo-ken Nanbu earthquake preliminary reconnaissance report, El Cerrito, CA.
Hart, G. C. (1982). Uncertainty analysis, loads, and safety in structural engineering, Prentice Hall, Englewood Cliffs, NJ.
Hitch, J. L. (1998). “Test methods for CLSM: Past, present, and future.” The design and application of controlled low-strength materials,ASTM, West Conshohocken, PA, 3–12.
Kirke, A., and Hao, H. (2004). “Estimation of failure probabilities of RC frame structures in Singapore to the simulated largest credible ground motion.” Eng. Struct., 26(1), 139–150.
Lin, C., and Suen, H. F. (2000). In witness of Chi-Chi Earthquake: Causes of camages and countermeasures, McGraw Hill, New York.
Lysmer, J., and Kuhlemeyer, R. L. (1969). “Finite dynamic model for infinite media.” J. Engrg. Mech. Div., 95(4), 859–877.
Mander, J. B., Priestley, M. J. N., and Park, R. (1988). “Theoretical stress-strain model for confined concrete.” J. Struct. Eng., 114(8), 1804–1826.
Multidisciplinary Center for Earthquake Engineering Research (MCEER). (1995). Preliminary report from the Hyogo-ken Nanbu earthquake, State Univ. of New York at Buffalo, Buffalo, NY.
National Center for Research on Earthquake Engineering (NCREE). (1999). Reconnaissance Report on 921 Chi-Chi Earthquake, Taipei, Taiwan.
National Institute of Building Sciences (NIBS). (1997). “Earthquake loss estimation methodology.” Tech. manual HAZUS97, Washington, DC.
Naval Facilities Engineering Command (NAVFAC). (1982). “Foundations and earth structures.” NAVFAC DM-7.2, Alexandria, VA.
Nielson, B. G., and DesRoches, R. (2007). “Seismic performance assessment of simply supported and continuous multispan concrete girder highway bridges.” J. Bridge Eng., 12(5), 611–620.
Owen, D. R. J., and Hinton, E. (1980). Finite elements in plasticity: Theory and practice, Pineridge Press, Swansea, U.K.
Padgett, J. E., and DesRoches, R. (2008). “Three-dimensional nonlinear seismic performance evaluation of retrofit measures for typical steel girder bridges.” Eng. Struct., 30(7), 1869–1878.
Pacific Earthquake Engineering Research Center (PEER). (2000). “PEER strong motion database.” Univ. of California, Berkeley, CA 〈http://peer.berkeley.edu/peer_ground_motion_database〉.
Pan, Y., Agrawal, A. K., Ghosn, M., and Alampalli, S. (2010). “Seismic fragility of multispan simply supported steel highway bridges in New York State. II: Fragility analysis, fragility curves, and fragility surfaces.” J. Bridge Eng., 15(5), 462–472.
Wang, C. J. (2008). “Simulation of collision contacts among disjoined soil-structure bodies under seismic motions.” Int. J. Mod. Phys. B, 22(9–10), 1544–1551.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Nov 15, 2011
Accepted: Apr 24, 2012
Published online: Apr 27, 2012
Published in print: Oct 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.