Characterization of Rutting (Permanent Strain) Development of A-2-4 and A-4 Subgrade Soils under the HVS Loading
Publication: Journal of Performance of Constructed Facilities
Volume 24, Issue 4
Abstract
As part of a national pool funded study 208 on pavement subgrade performance, 12 full-scale test sections (four soil types and three moisture contents) were constructed and tested under the heavy vehicle simulator (HVS) loading. This paper presents the HVS results on two of the four soils tested: AASHTO Class A-2-4 and A-4 soils, respectively. From the results, it was found that the pavement subgrade performance is a function of soil type, moisture content, and applied stress condition. Additionally, this paper also evaluated the current mechanistic-empirical pavement design guide (MEPDG) subgrade rutting (permanent strain) model through comparing with the actual measurements under the HVS loading. It was found that the MEPDG subgrade permanent strain model needs further improvement, and that a single performance model may not be universally applicable to different subgrade soil types. Consequently, a new permanent strain model for each soil type was developed in this paper, based on the HVS results, and that yielded better predictions. With further validation and field calibration, the proposed models offer promising potential to accurately predict rutting behavior of these two soils.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers are thankful for the financial support provided by the pooled fund study 2(205) in which Texas, New York State, and Louisiana participated. Special thanks go out to the pooled fund study 2(208) for providing the HVS data for the 2(205) study.
The contents and opinions of this paper reflect the views of the writers, who are solely responsible for the facts and the accuracy of the data presented herein. The contents of this paper do not necessarily reflect the official views or the policies of any agencies.
References
Barksdale, R. D. (1972). “Laboratory evaluation of rutting in base course materials.” Proc., 3rd Int. Conf. on the Structural Design of Asphalt Pavements, Univ. of Michigan, 161–174.
Cortez, E. R. (2007). “Pavement subgrade performance study.” Final Rep., Cold Regions Research and Engineering Laboratory, Hanover, N.H.
El-Badawy, S. M., and Witczak, M. W. (2007). “Development of a universal permanent strain model for the subgrade pavement materials.” Presented at TRB2007, Washington, D.C.
“Guide for mechanistic-empirical design of new and rehabilitated pavement structures.” (2004). Final Rep., NCHRP Project 1-37A. TRB, National Research Council, Washington, D.C., ⟨http://trb.org/mepdg/guide.htm⟩ (March 2004).
Hicks, R. G. (1970). “Factors influencing the resilient properties of granular materials.” Ph.D. dissertation, Univ. of California, Calif.
Huang, Y. H. (1993). Pavement design and analysis, Prentice-Hall, Englewood Cliffs, N.J.
Janoo, V., Irwin, L., and Haehnel, R. (2003). “Pavement subgrade performance study project overview.” ERDC/ITL TR-03-5, U.S. Army Corps of Engineers, Engineer Research and Development Center.
Kenis, W. (1977). “Prediction design procedures—A design method for flexible pavements using the VESYS structural subsystem.” Proc., 4th Int. Conf. on Structural Design of Asphalt Pavements, Ann Arbor, Mich., 101–130.
Li, D., and Selig, E. T. (1996). “Cumulative plastic deformation for fine-grained subgrade soils.” J. Geotech. Engrg., 122(12), 1006–1013.
Lytton, R. L., Uzan, J., Fernando, E. G., Roque, R., Hiltumen, D., and Stoffels, S. M. (1993). “Development and Validation of performance prediction models and specifications for asphalt binders and paving mixes.” SHRP A-357, National Research Council, Washington, D.C.
Majidzadeh, K., Bayomy, F., and Khedr, S. (1978). “Rutting evaluation of subgrade soils in Ohio.” Transportation Research Record. 671, Transportation Research Board, Washington, D.C., 75–84.
Monismith, C. L., Ogawa, L., and Freeme, C. R. (1975). “Permanent deformation characteristics of subgrade soils due to repeated loading.” Transportation Research Record. 537, Transportation Research Board, Washington, D.C., 1–17.
Seed, H. B., Chan, C. K., and Lee, C. E. (1963). “Resilient characteristics of subgrade soil and their relation to fatigue failures in asphalt pavements.” Proc., Int. Conf. on the Structural Design of Asphalt Pavement, Univ. of Michigan, 611–636.
Tseng, K. -H., and Lytton, R. L. (1989). “Prediction of permanent deformation in flexible pavement materials, implication of aggregates in the design, construction, and performance of flexible pavements.” ASTM STP 1016, ASTM, Philadelphia, 154–172.
Uzan, J. (1998). “Characterization of clayey subgrade materials for mechanistic design of flexible pavements.” Transportation Research Record. 1629, Transportation Research Board, Washington, D.C., 189–196.
Uzan, J. (2004). “Permanent Deformation in flexible pavements.” J. Transp. Eng., 130(1), 6–13.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: May 14, 2009
Accepted: Nov 20, 2009
Published online: Dec 29, 2009
Published in print: Aug 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.