Model-Based Damage Identification in a Continuous Bridge Using Vibration Data
Publication: Journal of Performance of Constructed Facilities
Volume 24, Issue 2
Abstract
Damage often causes changes in the dynamic characteristics of a structure such as frequencies and mode shapes. Vibration-based damage identification techniques utilize the changes in the dynamic characteristics of a structure to determine the location and extent of damage in the structure. Such techniques are applied in this study to the Crowchild Bridge, a steel-free deck continuous bridge located in western Canada. While the numerical models of the bridge are correlated with the measured dynamic characteristics, computer simulation is used to study the identification of a number of different damage patterns, and the effects of measurement errors and incomplete mode shapes on the quality of results are evaluated. The effectiveness of some selected damage identification techniques is examined; the potential difficulties in identifying the damage are outlined; and areas of further research are suggested. A three-dimensional finite-element model and a simple two-dimensional girder model of the bridge have been constructed to study the usefulness of the selected damage identification methods. Another promising damage detection method proposed here is based on the application of neural networks that combines a vibration-based method.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The support of the Canadian Network of Centres of Excellence on Intelligent Sensing for Innovative Structures (ISIS Canada) and Fonds québécois de la recherche sur la nature et les technologies is gratefully acknowledged.
References
Allman, D. J. (1984). “A compatible triangular element including vertex rotations for plane elasticity analysis.” Comput. Struc., 19(1–2), 1–8.
Bagchi, A. (2005). “Updating the mathematical model of a structure using the measured vibration characteristics.” J. Vib. Control, 11(12), 1469–1486.
Bagchi, A., Humar, J., and Noman, A. (2007). “Development of a finite element system for vibration-based damage identification in structures.” J. Appl. Sci., 7(17), 2404–2413.
Bakht, B., and Mufti, A. (1998). “Five steel-free bridge deck slabs in Canada.” Struct. Eng. Int. (IABSE, Zurich, Switzerland), 8(3), 196–200.
Batoz, J. L. (1982). “An explicit formulation for an efficient triangular plate bending element.” Int. J. Numer. Methods Eng., 18, 1077–1089.
Cheng, J. J. R., and Afhami, S. (1999). “Field instrumentation and monitoring of Crowchild Bridge in Calgary, Alberta.” Univ. of Alberta Rep. for ISIS Canada, Univ. of Alberta, Edmonton, Canada.
Cheng, J. J. R., and Zwol, T. V. (2005). “Steel-free deck: Field performance and evaluation.” Proc., Int. Workshop on Innovative Bridge Deck Technologies, ISIS Canada Research Network, Winnipeg, Canada.
Doebling, S. W., Farrar, C. R., and Prime, M. B. (1998). “A summary review of vibration-based damage identification methods.” Shock Vib. Dig., 30, 91–105.
Farrar, C. R., Baker, W. E., Bell, T. M., Cone, K. M., Darling, T. W., Duffey, T. A., Eklund, A., and Migliori, A. (1994). “Dynamic characterization and damage detection in the I-40 bridge over the Rio Grande.” Rep. No. LA 12767-MS, Los Alamos National Laboratory, Los Alamos, New Mexico.
Gill, P. E., Murray, W., and Wright, M. H. (1981). Practical optimization, Academic, London.
Hagan, M. T., Demuth, H. B., and Beale, M. (1995). Neural network design, PWS, Boston.
Humar, J., Bagchi, A., and Xu, H. (2006). “Performance analysis of vibration-based techniques for structural damage identification.” Struct. Health Monit., 5(3), 215–241.
Humar, J., Xu, H., and Bagchi, A. (2004). “Application of neural networks in damage detection in structures.” Proc., 2nd Int. Workshop on SHM (SHM 2004), ISIS Canada Research Network, Winnipeg, Canada.
Humar, J. L., Bagchi, A., and Xu, H. (2003). “Vibration-based damage identification for a three span continuous steel-free deck bridge located in Canada.” Proc., Int. Workshop on Structural Health Monitoring of Bridges/Colloquium on Bridge Vibration (SHMB), Kitami Institute of Technology, Kitami, Japan, 203–210.
Kabe, A. M. (1985). “Stiffness matrix adjustment using mode data.” AIAA J., 23(9), 1431–1436.
MATLAB. (2009). User's guide, Mathworks Inc., Natick, Mass.
O’Callahan, J., Avitabile, P., and Riemer, R. (1989). “System equivalent reduction expansion process (SEREP).” Proc., 7th Int. Modal Analysis Conf., Society for Experimental Mechanics, Bethel, Conn., 29–37.
Stubbs, N., Kim, J. -T., and Farrar, C. R. (1995). “Field verification of a non-destructive damage localization and severity estimation algorithm.” Proc., 13th Int. Modal Analysis Conf., Canadian Society of Civil Engineering, Montreal, 210–218.
Tadros, G., Tromposch, E., and Mufti, A. A. (1998). “Superstructure replacement of the Crowchild Trail Bridge.” Proc., 5th Int. Conf. on Short and Medium Span Bridges, Society for Experimental Mechanics, Bethel, Conn.
Ventura, C. E., Onur, T., and Tsai, R. C. (2000). “Dynamic characteristics of the Crowchild Trail Bridge.” Can. J. Civ. Eng., 27, 1046–1056.
Xu, H., and Humar, J. (2006). “Damage detection in a girder bridge by artificial neural network technique.” Comput. Aided Civ. Infrastruct. Eng., 21, 450–464.
Zang, C., and Imregun, M. (2001). “Structural damage detection using artificial neural networks and measured FRF data reduced via principal component projection.” J. Sound Vibrat., 242(5), 813–827.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Nov 11, 2008
Accepted: Jul 1, 2009
Published online: Mar 15, 2010
Published in print: Apr 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.