Formulation of Seismic Fragilities for a Wood-Frame Building Based on Visually Determined Damage Indexes
Publication: Journal of Performance of Constructed Facilities
Volume 23, Issue 5
Abstract
The study of earthquake engineering has made significant strides over the last one-half century with scientists developing methods to better understand the basis and mechanisms of earthquakes and engineers working to mitigate economic loss and fatalities. A paradigm known as performance-based seismic design (PBSD) not only provides life safety to building occupants, but seeks to control structural and nonstructural damage in buildings and other structures. The development of fragility curves based on the well-known Park-Ang damage index is examined herein. This type of formulation can provide the information needed to assess the seismic vulnerability of a structure. Existing shake table test data from the NEESWood Project’s test of a (1,800 sq ft) two-story house was combined with a participant survey to calibrate a damage model. The result was the development of damage fragilities based exclusively on nonlinear time history analysis. Then, the proposed numerical damage model was applied and fragility curves were developed for a six-story light-frame wood condominium building. The results appear logical based on observations of system-level shake table tests over the last decade, and thus the method shows promise provided significant torsion is not present in the system.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The data used in this paper were from the work supported by the National Science Foundation under Grant Nos. NSFCMS-0529903 (NEES Research) (The NEESWood Project) and NSFCMS-0402490 (NEES Operation). Any opinions, findings, and conclusions or recommendations expressed in this material are those of the writer(s) and do not necessarily reflect the views of the National Science Foundation or the research team that generated that data experimentally. The use of the data and access to the NEES data repository to develop the model in this paper is sincerely appreciated.
References
Applied Technology Council. (2006). “Next generation performance-based seismic design.” FEMA446, Chaps. 5 and 6, 61–84, Applied Technology Council, Redwood City, Calif.
ASCE. (2006). “Minimum design loads for building and other structures.” ASCE standard 07, ASCE, Reston, Va.
Christovasilis, I. P., Filiatrault, A., and Wanitkorkul, A. (2007). “Seismic testing of a full-scale two-story wood light-frame building: NEESWood Benchmark Test. Development of a performance-based seismic design philosophy for mid-rise woodframe construction.” Rep. Prepared for The State University of New York at Buffalo, National Science Foundation, NEESWood Project, Colorado State University, Fort Collins, Colo.
Ellingwood, B. R., Rosowsky, D. V., Li, Y., and Kim, J. H. (2004). “Fragility assessment of light-frame wood construction subjected to wind and earthquake hazards.” J. Struct. Eng., 130(12), 1921–1930.
Folz, B. and Filiatrault, A. (2004a). “Seismic analysis of woodframe structures. I: Model formulation.” J. Struct. Eng., 130(9), 1353–1360.
Folz, B. and Filiatrault, A. (2004b). “Seismic analysis of woodframe structures. II: Model implementation and verification.” J. Struct. Eng., 130(9), 1361–1370.
Kim, J., and Rosowsky, D. V. (2005). “Fragility analysis for performance-based seismic design of engineered wood shearwalls.” J. Struct. Eng., 131(11), 1764–1773.
Lee, K., and Rosowsky, D. V. (2005). “Fragility assessment for roof sheathing failure in high wind regions.” Eng. Struct., 27, 857–868.
Li, Y., and Ellingwood, B. R. (2006). “Hurricane damage to residential construction in the US: Importance of uncertainty modeling in risk assessment.” Eng. Struct., 28, 1009–1018.
Newmark, N. M., and Rosenblueth, E. (1974). Fundamental of earthquake engineering, Prentice-Hall, Englewood Cliffs, N.J.
Pang, W.(2007). “Evolutionary parameter hysteric model for wood shear walls.” J. Struct. Eng., 133(8), 1118–1129.
Pang, W. C., and Rosowsky, D. V. (2008). “Performance-based seismic design of six-story woodframe structure.” Struct. Eng. Int. (IABSE, Zurich, Switzerland), 18(2), 179–185.
Park, S. (2008). “Formulation of seismic fragilities using a damage index.” MS thesis, Civil and Environmental Engineering, Colorado State Univ., Fort Collins, Colo.
Park, Y., and Ang, A. H. S. (1985). “Mechanistic seismic damage model for reinforced concrete.” J. Struct. Eng., 111(4), 722–739.
Pei, S. (2007). “Loss analysis and loss based seismic design for woodframe structures.” Ph.D. dissertation, Civil and Environmental Engineering, Colorado State Univ., Fort Collins, Colo.
Pei, S., and van de Lindt, J. W. (2008a). Manual of SAPWood for Windows version 1.0, NEESWood Project, Colorado State University, Fort Collins, Colo.
Pei, S., and van de Lindt, J. W. (2008b). “Methodology for earthquake-induced loss estimation: An application to woodframe buildings.” Struct. Safety, in press.
Porter, K. A., et al. (2001). Improving loss estimation for woodframe buildings, CUREE-Caltech Woodframe Project. San Diego, Department of Structural Engineering, University of California, CUREE Publication No, W, 01.
Rosowsky, D. V., and Ellingwood, B. R. (2002). “Performance-based engineering of wood frame housing: Fragility analysis methodology.” J. Struct. Eng., 128(1), 32–38.
van de Lindt, J. W. (2005). “Damaged-based seismic reliability concept for woodframe structures.” J. Struct. Eng., 131(4), 668–675.
van de Lindt, J. W., and Gupta, R. (2006). “Damage and damage prediction for wood shearwalls subjected to simulated earthquake loads.” J. Perform. Constr. Facil., 20(2), 176–184.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Sep 2, 2008
Accepted: Feb 12, 2009
Published online: Sep 15, 2009
Published in print: Oct 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.