Flexural Durability of Seawater Coral Aggregate Concrete Beams Reinforced with Basalt FRP Bars
Publication: Journal of Composites for Construction
Volume 26, Issue 2
Abstract
The application of fiber-reinforced polymer (FRP) reinforcement in coral aggregate concrete (CAC) structures is a new solution to the shortage of construction materials on islands and reefs far from the mainland and to the insufficient durability of steel-reinforced concrete members. However, the understanding of the durability of FRP bar-reinforced CAC members is not yet clear, which greatly limits the evaluation and design of their long-term performance. In this paper, accelerated degradation tests were carried out in a high-temperature and high-humidity marine environment to study the durability of CAC beams reinforced with basalt FRP (BFRP) bars and stirrups. Four-point flexural tests were performed on beams that have been subjected to environmental conditions to study the effects of environmental time, temperature, and concrete type on the failure mode, cracking and ultimate moment, midspan deflection, crack width and pattern, and ductility. In addition, an engineered cementitious composite (ECC)–CAC composite beam reinforced with BFRP bars was proposed to improve the mechanical properties and durability of the CAC beam reinforced with BFRP bars. The results showed that, in the early stage of environmental conditions (1–2 months), the effect of the environment on the mechanical properties of the CAC beam reinforced with BFRP bars was beneficial. With increasing environmental condition time, the effect of environmental conditions on the mechanical properties of the CAC beam reinforced with BFRP bars gradually weakened. The failure mode, deflection, crack width, and crack pattern of the ECC–CAC composite beam reinforced with BFRP bars were greatly improved compared with those of the CAC beam reinforced with BFRP bars.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the financial support from the Jiangsu Provincial Key Research and Development Program (BE2019642).
Notation
The following symbols are used in this paper:
- Ee
- elastic energy, calculated by the triangle area formed by the oblique line made through the limit deflection point;
- Et
- total energy of the bending moment–deflection curve;
- Mcr-exp
- cracking moment obtained from the test (kN · m);
- Mn
- ultimate moment of beams (MPa);
- Mn-exp
- ultimate bending moment from the test (kN · m); and
- μE
- ductility index obtained by the energy-based method.
References
Abdelkarim, O. I., E. A. Ahmed, H. M. Mohamed, and B. Benmokrane. 2019. “Flexural strength and serviceability evaluation of concrete beams reinforced with deformed GFRP bars.” Eng. Struct. 186: 282–296. https://doi.org/10.1016/j.engstruct.2019.02.024.
ACI (American Concrete Institute). 2004. Guide test methods for fiber reinforced polymers (FRPs) for reinforcing or strengthening concrete structures. ACI 440.3R. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2015. Guide for the design and construction of structural concrete reinforced with fiber-reinforced polymer bars. ACI 440.1R. Farmington Hills, MI: ACI.
Ahmed, A., S. Guo, Z. Zhang, C. Shi, and D. Zhu. 2020. “A review on durability of fiber reinforced polymer (FRP) bars reinforced seawater sea sand concrete.” Constr. Build. Mater. 256: 119484. https://doi.org/10.1016/j.conbuildmat.2020.119484.
Ali, A. H., H. M. Mohamed, and B. Benmokrane. 2020. “Bar size effect on long-term durability of sand-coated basalt-FRP composite bars.” Composites, Part B 195: 108059. https://doi.org/10.1016/j.compositesb.2020.108059.
Ali, A. H., H. M. Mohamed, B. Benmokrane, A. ElSafty, and O. Chaallal. 2019. “Durability performance and long-term prediction models of sand-coated basalt FRP bars.” Composites, Part B 157: 248–258. https://doi.org/10.1016/j.compositesb.2018.08.065.
ASTM. 2013. Standard practice for the preparation of substitute ocean water. ASTM D1141-98. West Conshohocken, PA: ASTM.
Benmokrane, B., F. Elgabbas, E. A. Ahmed, and P. Cousin. 2015. “Characterization and comparative durability study of glass/vinylester, basalt/vinylester, and basalt/epoxy FRP bars.” J. Compos. Constr. 19 (6): 04015008. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000564.
Chinese Standard. 2002. Standard test method for mechanical properties of ordinary concrete. GB/T50081. Beijing: Chinese Standard.
Da, B., H. Yu, H. Ma, Y. Tan, R. Mi, and X. Dou. 2016a. “Experimental investigation of whole stress-strain curves of coral concrete.” Constr. Build. Mater. 122: 81–89. https://doi.org/10.1016/j.conbuildmat.2016.06.064.
Da, B., H. Yu, H. Ma, Y. Tan, R. Mi, and X. Dou. 2016b. “Chloride diffusion study of coral concrete in a marine environment.” Constr. Build. Mater. 123: 47–58. https://doi.org/10.1016/j.conbuildmat.2016.06.135.
Ding, L., J. Shi, X. Wang, Y. Liu, Y. Jin, and Z. Wu. 2020. “Bond behavior between basalt fiber-reinforced polymer rebars and coral-reef-sand concrete conditioned in saline solution.” Struct. Concr. 21 (2): 659–672. https://doi.org/10.1002/suco.201900106.
Dong, Z., G. Wu, B. Xu, X. Wang, and L. Taerwe. 2016. “Bond durability of BFRP bars embedded in concrete under seawater conditions and the long-term bond strength prediction.” Mater. Des. 92: 552–562. https://doi.org/10.1016/j.matdes.2015.12.066.
Dong, Z., G. Wu, B. Xu, X. Wang, and L. Taerwe. 2018a. “Bond performance of alkaline solution pre-exposed FRP bars with concrete.” Mag. Concr. Res. 70 (17): 894–904. https://doi.org/10.1680/jmacr.17.00027.
Dong, Z., G. Wu, X.-L. Zhao, H. Zhu, and J.-L. Lian. 2018b. “Durability test on the flexural performance of seawater sea-sand concrete beams completely reinforced with FRP bars.” Constr. Build. Mater. 192: 671–682. https://doi.org/10.1016/j.conbuildmat.2018.10.166.
Dong, Z., G. Wu, X.-L. Zhao, H. Zhu, and X. Shao. 2019. “Behaviors of hybrid beams composed of seawater sea-sand concrete (SWSSC) and a prefabricated UHPC shell reinforced with FRP bars.” Constr. Build. Mater. 213: 32–42. https://doi.org/10.1016/j.conbuildmat.2019.04.059.
Dong, Z., G. Wu, X. Zhao, H.-L. Zhu, Y. Wei, and Z. Yan. 2020. “Mechanical properties of discrete BFRP needles reinforced seawater sea-sand concrete-filled GFRP tubular stub columns.” Constr. Build. Mater. 244: 118330. https://doi.org/10.1016/j.conbuildmat.2020.118330.
Dong, Z., Y. Sun, G. Wu, H. Zhu, X.-L. Zhao, Y. Wei, and P. Zhang. 2021. “Flexural behavior of seawater sea-sand concrete beams reinforced with BFRP bars/grids and BFRP-wrapped steel tubes.” Compos. Struct. 268: 113956. https://doi.org/10.1016/j.compstruct.2021.113956.
Elmessalami, N., A. El Refai, and F. Abed. 2019. “Fiber-reinforced polymers bars for compression reinforcement: A promising alternative to steel bars.” Constr. Build. Mater. 209: 725–737. https://doi.org/10.1016/j.conbuildmat.2019.03.105.
El-Nemr, A., E. A. Ahmed, A. El-Safty, and B. Benmokrane. 2018. “Evaluation of the flexural strength and serviceability of concrete beams reinforced with different types of GFRP bars.” Eng. Struct. 173: 606–619. https://doi.org/10.1016/j.engstruct.2018.06.089.
El Refai, A., M.-A. Ammar, and R. Masmoudi. 2015. “Bond performance of basalt fiber-reinforced polymer bars to concrete.” J. Compos. Constr. 19 (3): 04014050. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000487.
Ge, W., A. F. Ashour, D. Cao, W. Lu, P. Gao, J. Yu, X. Ji, and C. Cai. 2019a. “Experimental study on flexural behavior of ECC-concrete composite beams reinforced with FRP bars.” Compos. Struct. 208: 454–465. https://doi.org/10.1016/j.compstruct.2018.10.026.
Ge, W., A. F. Ashour, J. Yu, P. Gao, D. Cao, C. Cai, and X. Ji. 2019b. “Flexural behavior of ECC-concrete hybrid composite beams reinforced with FRP and steel bars.” J. Compos. Constr. 23 (1): 04018069-1-20. https://doi.org/ 10.1061/(ASCE)CC.1943-5614.0000910.
Gravina, R. J., J. Li, S. T. Smith, and P. Visintin. 2020. “Environmental durability of FRP bar-to-concrete bond: Critical review.” J. Compos. Constr. 24 (4): 03120001. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001016.
Huang, D., D. Niu, L. Su, and Q. Fu. 2021. “Chloride diffusion behavior of coral aggregate concrete under drying–wetting cycles.” Constr. Build. Mater. 270: 121485. https://doi.org/10.1016/j.conbuildmat.2020.121485.
Li, J., R. J. Gravina, S. T. Smith, and P. Visintin. 2020. “Bond strength and bond stress–slip analysis of FRP bar to concrete incorporating environmental durability.” Constr. Build. Mater. 261: 119860. https://doi.org/10.1016/j.conbuildmat.2020.119860.
Liu, J., Z. Ou, W. Peng, T. Guo, W. Deng, and Y. Chen. 2018. “Literature review of coral concrete.” Arabian J. Sci. Eng. 43 (4): 1529–1541. https://doi.org/10.1007/s13369-017-2705-x.
Lyu, B., A. Wang, Z. Zhang, K. Liu, H. Xu, L. Shi, and D. Sun. 2019. “Coral aggregate concrete: Numerical description of physical, chemical and morphological properties of coral aggregate.” Cem. Concr. Compos. 100: 25–34. https://doi.org/10.1016/j.cemconcomp.2019.03.016.
Ma, L., Z. Li, J. Liu, L. Duan, and J. Wu. 2019. “Mechanical properties of coral concrete subjected to uniaxial dynamic compression.” Constr. Build. Mater. 199: 244–255. https://doi.org/10.1016/j.conbuildmat.2018.12.032.
Manalo, A. C., P. Mendis, Y. Bai, B. Jachmann, and C. D. Sorbello. 2021. “Fiber-reinforced polymer bars for concrete structures: State-of-the-practice in Australia.” J. Compos. Constr. 25 (1): 05020007. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001105.
Monaldo, E., F. Nerilli, and G. Vairo. 2019. “Basalt-based fiber-reinforced materials and structural applications in civil engineering.” Compos. Struct. 214: 246–263. https://doi.org/10.1016/j.compstruct.2019.02.002.
Moon, D. Y., Y.-C. Ou, and H. Roh. 2017. “Interlaminar shear capacity of thermally damaged GFRP bars under alkaline concrete environment.” Constr. Build. Mater. 152: 105–114. https://doi.org/10.1016/j.conbuildmat.2017.06.158.
Mufti, A. A., M. Onofrei, B. Benmokrane, N. Banthia, M. Boulfiza, J. P. Newhook, B. Bakht, G. S. Tadros, and P. Brett. 2007. “Field study of glass-fibre-reinforced polymer durability in concrete.” Can. J. Civ. Eng. 34 (3): 355–366. https://doi.org/10.1139/l06-138.
Niu, D., L. Zhang, Q. Fu, B. Wen, and D. Luo. 2020. “Critical conditions and life prediction of reinforcement corrosion in coral aggregate concrete.” Constr. Build. Mater. 238: 117685. https://doi.org/10.1016/j.conbuildmat.2019.117685.
Park, Y., Y. Kim, and S.-H. Lee. 2014. “Long-term flexural behaviors of GFRP reinforced concrete beams exposed to accelerated aging exposure conditions.” Polymers 6 (6): 1773–1793. https://doi.org/10.3390/polym6061773.
Serbescu, A., M. Guadagnini, and K. Pilakoutas. 2015. “Mechanical characterization of basalt FRP rebars and long-term strength predictive model.” J. Compos. Constr. 19 (2): 04014037. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000497.
Wang, A., B. Lyu, Z. Zhang, K. Liu, H. Xu, and D. Sun. 2018a. “The development of coral concretes and their upgrading technologies: A critical review.” Constr. Build. Mater. 187: 1004–1019. https://doi.org/10.1016/j.conbuildmat.2018.07.202.
Wang, H., and A. Belarbi. 2013. “Flexural durability of FRP bars embedded in fiber-reinforced-concrete.” Constr. Build. Mater. 44: 541–550. https://doi.org/10.1016/j.conbuildmat.2013.02.065.
Wang, L., Y. Mao, H. Lv, S. Chen, and W. Li. 2018b. “Bond properties between FRP bars and coral concrete under seawater conditions at 30, 60, and 80 °C.” Constr. Build. Mater. 162: 442–449. https://doi.org/10.1016/j.conbuildmat.2017.12.058.
Wang, Z. K., X.-L. Zhao, G. Xian, G. Wu, R. K. Singh Raman, and S. Al-Saadi. 2017a. “Durability study on interlaminar shear behaviour of basalt-, glass- and carbon-fibre reinforced polymer (B/G/CFRP) bars in seawater sea sand concrete environment.” Constr. Build. Mater. 156: 985–1004. https://doi.org/10.1016/j.conbuildmat.2017.09.045.
Wang, Z., X.-L. Zhao, G. Xian, G. Wu, R. K. Singh Raman, S. Al-Saadi, and A. Haque. 2017b. “Long-term durability of basalt- and glass-fibre reinforced polymer (BFRP/GFRP) bars in seawater and sea sand concrete environment.” Constr. Build. Mater. 139: 467–489. https://doi.org/10.1016/j.conbuildmat.2017.02.038.
Wu, G., Z.-Q. Dong, X. Wang, Y. Zhu, and Z.-S. Wu. 2015a. “Prediction of long-term performance and durability of BFRP bars under the combined effect of sustained load and corrosive solutions.” J. Compos. Constr. 19 (3): 04014058. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000517.
Wu, G., X. Wang, Z. S. Wu, Z. Q. Dong, and Q. Xie. 2015b. “Degradation of basalt FRP bars in alkaline environment.” Sci. Eng. Compos. Mater. 22 (6): 649–657. https://doi.org/10.1515/secm-2014-0040.
Wu, Z., H. Yu, H. Ma, J. Zhang, B. Da, and H. Zhu. 2020. “Rebar corrosion in coral aggregate concrete: Determination of chloride threshold by LPR.” Corros. Sci. 163: 108238. https://doi.org/10.1016/j.corsci.2019.108238.
Yan, F., and Z. Lin. 2017. “Bond durability assessment and long-term degradation prediction for GFRP bars to fiber-reinforced concrete under saline solutions.” Compos. Struct. 161: 393–406. https://doi.org/10.1016/j.compstruct.2016.11.055.
Yan, F., Z. Lin, and M. Yang. 2016. “Bond mechanism and bond strength of GFRP bars to concrete: A review.” Composites, Part B 98: 56–69. https://doi.org/10.1016/j.compositesb.2016.04.068.
Zhang, Y., Y. Wei, J. Bai, G. Wu, and Z. Dong. 2020. “A novel seawater and sea sand concrete filled FRP-carbon steel composite tube column: Concept and behaviour.” Compos. Struct. 246: 112421. https://doi.org/10.1016/j.compstruct.2020.112421.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Aug 23, 2021
Accepted: Dec 17, 2021
Published online: Feb 4, 2022
Published in print: Apr 1, 2022
Discussion open until: Jul 4, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Bai Zhang, Hong Zhu, Zhiqiang Dong, Zhiyuan Yang, Mechanical properties and durability of FRP-reinforced coral aggregate concrete structures: A critical review, Materials Today Communications, 10.1016/j.mtcomm.2023.105656, 35, (105656), (2023).
- Bai Zhang, Hong Zhu, Durability of seawater coral aggregate concrete under seawater immersion and dry-wet cycles, Journal of Building Engineering, 10.1016/j.jobe.2023.105894, 66, (105894), (2023).
- Bai Zhang, Hong Zhu, Compressive stress–strain behavior of slag-based alkali-activated seawater coral aggregate concrete after exposure to seawater environments, Construction and Building Materials, 10.1016/j.conbuildmat.2023.130294, 367, (130294), (2023).
- Xiangzhou Liang, Juanzhao Peng, Ruobing Ren, A state-of-the-art review: Shear performance of the concrete beams reinforced with FRP bars, Construction and Building Materials, 10.1016/j.conbuildmat.2022.129996, 364, (129996), (2023).
- Yong Yi, Deju Zhu, Shuaicheng Guo, Sheng Li, Guangyan Feng, Zhijian Liu, Linlin Zhou, Caijun Shi, Development of a low-alkalinity seawater sea sand concrete for enhanced compatibility with BFRP bar in the marine environment, Cement and Concrete Composites, 10.1016/j.cemconcomp.2022.104778, 134, (104778), (2022).