Flexural Behavior of Concrete Beams Strengthened with Polyurethane-Matrix Carbon-Fiber Composites
Publication: Journal of Composites for Construction
Volume 24, Issue 4
Abstract
Fiber-reinforced polymer (FRP) materials have been increasingly used for external strengthening of reinforced concrete (RC) infrastructure. However, the focus has been almost exclusively on epoxy-based composites, and other potential options such as polyurethane (PU) have not been fully investigated. This paper characterizes the flexural behavior of concrete strengthened with PU matrix–adhesive laminates using small-scale single lap shear specimens, unreinforced flexural specimens, and large-scale RC girders. Experimental results demonstrate that although the normal and shear strengths of PU-based adhesives are low, PU-strengthened beams show increased strength and deformability, owing to the load redistribution ability within the bond line. It is found that a linear brittle bond–slip model adequately predicts the interfacial shear behavior of the PU adhesive, exhibiting a lower stiffness and comparable cohesive energy to epoxy. Finite element (FE) analysis was performed to validate the effect of the bond–slip model relative to the experimental results.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank Neptune Research Inc. (NRI) for providing the composite materials utilized in this study and for guidance on installation. In particular, the authors acknowledge the assistance of Eri Vokshi and Chris Lazzara. The views and findings reported here are those of the writers alone, and not necessarily the views of NRI.
References
Abdel Baky, H., U. Ebead, and K. Neale. 2012. “Nonlinear micromechanics-based bond–slip model for FRP/concrete interfaces.” Eng. Struct. 39: 11–23. https://doi.org/10.1016/j.engstruct.2012.01.010.
ACI (American Concrete Institute). 2012. Guide test methods for fiber-reinforced polymers (FRPs) for reinforcing or strengthening concrete structures. ACI-440.3R. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2017. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. ACI-440.2R. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2019. Building code requirements for structural concrete. ACI-318. Farmington Hills, MI: ACI.
Al-Jelawy, H. 2013. “Experimental and numerical investigations on bond durability of CFRP strengthened concrete members subjected to environmental exposure.” Master’s thesis, Dept of Civil, Environmental, and Construction Engineering, Univ. of Central Florida.
Al-Lebban, Y. A., and K. R. Mackie. 2019. “Polyurethane-FRP external strengthening of RC beams with no steel stirrups.” J. Compos. Constr. 23 (1): 04018074. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000916.
Arduini, M., and A. Nanni. 1997. “Behavior of precracked RC beams strengthened with carbon FRP sheets.” J. Compos. Constr. 1 (2): 63–70. https://doi.org/10.1061/(ASCE)1090-0268(1997)1:2(63).
Arduini, M., A. Nanni, and M. Romagnolo. 2004. “Performance of one-way reinforced concrete slabs with externally bonded fiber-reinforced polymer strengthening.” ACI Struct. J. 101 (2): 193–201.
ASTM. 2015. Standard test method for pull-off strength for FRP laminate systems bonded to concrete substrate. ASTM D7522/D7522M. West Conshohocken, PA: ASTM.
ASTM. 2016. Standard test method for flexural strength of concrete (using simple beam with third-point loading). ASTM C293/C293M. West Conshohocken, PA: ASTM.
ASTM. 2017a. Standard test method for determining tensile properties of fiber reinforced polymer matrix composites used for strengthening of civil structures. ASTM D7565/D7565M. West Conshohocken, PA: ASTM.
ASTM. 2017b. Standard test method for pull-off strength of coatings using portable adhesion testers. ASTM D4541/D4541M. West Conshohocken, PA: ASTM.
ASTM. 2018. Standard test method for compressive strength of cylindrical concrete specimens. ASTM C39/C39M. West Conshohocken, PA: ASTM.
Bazinet, S., L. Cereone, and F. Worth. 2003. “Composite FRP moves into underwater repair applications.” SAMPE J. 39 (3): 8–16.
Burchardt, B. 2010. “Advances in polyurethane structural adhesives.” Chap. 3 in Advances in structural adhesive bonding, 35–65. Cambridge, UK: Woodhead Publishing.
Buyukozturk, O., O. Gunes, and E. Karaca. 2004. “Progress on understanding debonding problems in reinforced concrete and steel members strengthened using FRP composites.” Constr. Build. Mater. 18 (1): 9–19. https://doi.org/10.1016/S0950-0618(03)00094-1.
CEB-FIP. 1993. CEB-FIP model code 1990. Lausanne, Switzerland: Thomas Telford.
Chajes, M. J., W. W. Finch, T. F. Januszka, and T. A. Thomson. 1996. “Bond and force transfer of composite material plates bonded to concrete.” ACI Struct. J. 93 (2): 208–217.
CNR (National Research Council). 2013. Guide for the design and construction of externally bonded FRP systems for strengthening existing structures. CNR-DT200-R1. Roma, Italy: NRC.
CSA (Canadian Standard Association). 2012. Design and construction of building structures with fibre-reinforced polymers. CAN/CSA-S806-12. Rexdale, ON, Canada: CSA.
Dai, J., and T. Ueda. 2003. “Local bond stress slip relations for FRP sheets–concrete interfaces.” In Proc., 6th Int. Symp. on FRP Reinforcement for Concrete Structures, 143–152. Singapore: World Scientific.
Dai, J., T. Ueda, and Y. Sato. 2005. “Development of the nonlinear bond stress–slip model of fiber reinforced plastics sheet–concrete interfaces with a simple method.” J. Compos. Constr. 9 (1): 52–62. https://doi.org/10.1061/(ASCE)1090-0268(2005)9:1(52).
El Zghayar, E., K. Mackie, and J. Xia. 2014. “Fiber reinforced polymer (FRP) composites in retrofitting of concrete structures: Polyurethane systems versus epoxy systems.” ACI Spec. Publ. 298: 1–22.
Esfahani, M. R., M. Kianoush, and A. Tajari. 2007. “Flexural behaviour of reinforced concrete beams strengthened by CFRP sheets.” Eng. Struct. 29 (10): 2428–2444. https://doi.org/10.1016/j.engstruct.2006.12.008.
Faella, C., E. Martinelli, and E. Nigro. 2009. “Direct versus indirect method for identifying FRP-to-concrete interface relationships.” J. Compos. Constr. 13 (3): 226–233. https://doi.org/10.1061/(ASCE)1090-0268(2009)13:3(226).
Fanning, P. J., and O. Kelly. 2001. “Ultimate response of RC beams strengthened with CFRP plates.” J. Compos. Constr. 5 (2): 122–127. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:2(122).
Fardis, M. N., and H. Khalili. 1981. “Concrete encased in fiberglass-reinforced plastic.” ACI Spec. Publ. 78 (6): 440–446.
FIP. 2006. Retrofitting of concrete structures by externally bonded FRPs. Technical Rep. Lausanne, Switzerland: International Federation for Structural Concrete.
Floruţ, S.-C., G. Sas, C. Popescu, and V. Stoian. 2014. “Tests on reinforced concrete slabs with cut-out openings strengthened with fibre-reinforced polymers.” Composites Part B 66: 484–493. https://doi.org/10.1016/j.compositesb.2014.06.008.
Gartner, A., E. P. Douglas, C. W. Dolan, and H. Hamilton. 2010. “Small beam bond test method for CFRP composites applied to concrete.” J. Compos. Constr. 15 (1): 52–61. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000151.
Grace, N. F., A. Soliman, G. Abdel-Sayed, and K. Saleh. 1998. “Behavior and ductility of simple and continuous FRP reinforced beams.” J. Compos. Constr. 2 (4): 186–194. https://doi.org/10.1061/(ASCE)1090-0268(1998)2:4(186).
Haber, Z. B., K. R. Mackie, and L. Zhao. 2012. “Mechanical and environmental loading of concrete beams strengthened with epoxy and polyurethane matrix carbon fiber laminates.” Constr. Build. Mater. 26 (1): 604–612. https://doi.org/10.1016/j.conbuildmat.2011.06.063.
Hu, H.-T., F.-M. Lin, and Y.-Y. Jan. 2004. “Nonlinear finite element analysis of reinforced concrete beams strengthened by fiber-reinforced plastics.” Compos. Struct. 63 (3–4): 271–281. https://doi.org/10.1016/S0263-8223(03)00174-0.
Kim, Y. J., J. M. Longworth, R. G. Wight, and M. F. Green. 2008. “Flexure of two-way slabs strengthened with prestressed or nonprestressed CFRP sheets.” J. Compos. Constr. 12 (4): 366–374. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:4(366).
Limam, O., G. Foret, and A. Ehrlacher. 2003. “RC two-way slabs strengthened with CFRP strips: Experimental study and a limit analysis approach.” Compos. Struct. 60 (4): 467–471. https://doi.org/10.1016/S0263-8223(03)00011-4.
Lu, X., J. Jiang, J. Teng, and L. Ye. 2006. “Finite element simulation of debonding in FRP-to-concrete bonded joints.” Constr. Build. Mater. 20 (6): 412–424. https://doi.org/10.1016/j.conbuildmat.2005.01.033.
Lu, X., J. Teng, L. Ye, and J. Jiang. 2005a. “Bond–slip models for FRP sheets/plates bonded to concrete.” Eng. Struct. 27 (6): 920–937. https://doi.org/10.1016/j.engstruct.2005.01.014.
Lu, X., L. Ye, J. Teng, and J. Jiang. 2005b. “Meso-scale finite element model for FRP sheets/plates bonded to concrete.” Eng. Struct. 27 (4): 564–575. https://doi.org/10.1016/j.engstruct.2004.11.015.
Maruyama, K. 2001. Recommendations for upgrading of concrete structures with use of continuous fiber sheets. Tokyo: Research Committee on Upgrading of Concrete Structures with use of Continuous Fiber Sheets, Japan Society of Civil Engineers.
Mazzotti, C., M. Savoia, and B. Ferracuti. 2008. “An experimental study on delamination of FRP plates bonded to concrete.” Constr. Build. Mater. 22 (7): 1409–1421. https://doi.org/10.1016/j.conbuildmat.2007.04.009.
Meier, U. 1987. “Bridge repair with high performance composite materials.” Mater. Tech. 4: 125–128.
Monti, G., M. Renzelli, and P. Luciani. 2003. “FRP adhesion in uncracked and cracked concrete zones.” In Vol. 1 of Proc., 6th Int. Symp. on FRP Reinforcement for Concrete Structures, 183–192. Singapore: World Scientific.
Mosallam, A. S., and K. M. Mosalam. 2003. “Strengthening of two-way concrete slabs with FRP composite laminates.” Constr. Build. Mater. 17 (1): 43–54. https://doi.org/10.1016/S0950-0618(02)00092-2.
Nakaba, K., T. Kanakubo, T. Furuta, and H. Yoshizawa. 2001. “Bond behavior between fiber-reinforced polymer laminates and concrete.” ACI Struct. J. 98 (3): 359–367.
Neubauer, U., and F. Rostasy. 1999. “Bond failure of concrete fiber reinforced polymer plates at inclined cracks experiments and fracture mechanics model.” ACI Spec. Publ. 188: 369–382.
Nguyen, D. M., T. K. Chan, and H. K. Cheong. 2001a. “Brittle failure and bond development length of CFRP-concrete beams.” J. Compos. Constr. 5 (1): 12–17. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:1(12).
Ritchie, P. A., D. A. Thomas, L. -W. Lu, and G. M. Connelly. 1990. “External reinforcement of concrete beams using fiber-reinforced plastics.” ACI Spec. Publ. 88 (4): 490–500.
Saadatmanesh, H., and M. R. Ehsani. 1991. “RC beams strengthened with GFRP plates. I: Experimental study.” J. Struct. Eng. 117 (11): 3417–3433. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:11(3417).
Sebastian, W. M. 2001. “Significance of midspan debonding failure in FRP-plated concrete beams.” J. Struct. Eng. 127 (7): 792–798. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:7(792).
Sen, R., and G. Mullins. 2007. “Application of FRP composites for underwater piles repair.” Composites Part B 38 (5–6): 751–758. https://doi.org/10.1016/j.compositesb.2006.07.011.
Somarathna, H., S. N. Raman, D. Mohotti, A. A. Mutalib, and K. Badri. 2018. “The use of polyurethane for structural and infrastructural engineering applications: A state-of-the-art review.” Constr. Build. Mater. 190: 995–1014. https://doi.org/10.1016/j.conbuildmat.2018.09.166.
Takeda, K., Y. Mitsui, K. Murakami, H. Sakai, and M. Nakamura. 1996. “Flexural behaviour of reinforced concrete beams strengthened with carbon fibre sheets.” Composites Part A 27 (10): 981–987. https://doi.org/10.1016/1359-835X(96)00059-0.
Teng, J., S. T. Smith, J. Yao, and J. F. Chen. 2003. “Intermediate crack-induced debonding in RC beams and slabs.” Constr. Build. Mater. 17 (6–7): 447–462. https://doi.org/10.1016/S0950-0618(03)00043-6.
Youssef, G., L. Loulou, S. Chataigner, S. Caré, A. Flety, R. Le Roy, M. Bornert, and C. Aubagnac. 2014. “Analysis of the behaviour of a bonded joint between laminated wood and ultra high performance fibre reinforced concrete using push-out test.” Constr. Build. Mater. 53: 381–391. https://doi.org/10.1016/j.conbuildmat.2013.10.074.
Yuan, H., J. Teng, R. Seracino, Z. Wu, and J. Yao. 2004. “Full-range behavior of FRP-to-concrete bonded joints.” Eng. Struct. 26 (5): 553–565. https://doi.org/10.1016/j.engstruct.2003.11.006.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Aug 23, 2019
Accepted: Jan 27, 2020
Published online: May 6, 2020
Published in print: Aug 1, 2020
Discussion open until: Oct 6, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.