Transverse Shear Testing of GFRP Bars with Reduced Cross Sections
Publication: Journal of Composites for Construction
Volume 22, Issue 5
Abstract
Shear testing of glass fiber–reinforced polymer (GFRP) bars can be considered for material specifications, quality control, quality assurance, and structural design purposes. ASTM and the Canadian Standards Association (CSA) specify the testing apparatus and the procedure to test fiber-reinforced polymer (FRP) matrix composites, in which the principal variables are the size (diameter) and type of the FRP bars. This study develops a device to test GFRP bars in shear based on both ASTM and CSA standards. The paper provides information about the significance of shear testing of GFRP bars and the potential outcomes of this type of test. For that purpose, different types of GFRP bars (straight and bent) provided by two different suppliers are studied. Two test series are considered. The first examines straight and bent bars from two different companies, and tests two different diameters of the GFRP bars. The straight bars are tested with and without their outer coating (provided by the companies) and the bent bars are tested in their straight portion. The same bars are tested in shear after being in an alkaline solution (pH 13) for 5 months (150 days) at 60°C. The second test series considers GFRP bars of various diameters (original GFRP bars are shaved). The main objective of this work is to propose a shear testing protocol for GFRP bars of various diameters by reducing the number of cutting blades of the shear testing device. Finally, the failure modes and the significance of stiffness are discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful for the financial support provided by a research grant from the Ministry of Transportation of Ontario (MTO), Canada. The authors also thank Schöck, Fiberline Composites (Canada), and Pultrall (Canada) for the GFRP bars that they provided.
References
ACI (American Concrete Institute). 2015. Guide for the design and construction of structural concrete reinforced with FRP bars. ACI 440.1R-15. Farmington Hills, MI: ACI.
Agarwal, B. D., and L. J. Broutman. 1990. Analysis and performance of fiber composites. 2nd ed. New York: Wiley.
Ang, H.-S. A., and H. W. Tang. 2007. Probability concepts in engineering: Emphasis on applications in civil & environmental engineering. Hoboken, NJ: Wiley.
Arczewska, P., M. A. Polak, and A. Penlidis. 2016. “Determination of properties and quality of GFRP reinforcing bars for concrete structures.” Int. J. Mater. Res. Technol. 15 (4): 225–261. https://doi.org/10.17654/MT015040225.
ASTM. 2011. Standard test method for transvers shear strength of fiber– reinforced polymer matrix composite bars. ASTM D7617. West Conshohocken, PA: ASTM.
ASTM. 2012. Standard test method for alkali resistance of fiber reinforced polymer (FRP) matrix composite bars used in concrete construction. ASTM D7705. West Conshohocken, PA: ASTM.
Benmokrane, B., and H. Rahman. 1998. “Durability of fiber reinforced polymer (FRP) composites for construction.” In Proc., 1st Int. Conf. (CDCC’98). Sherbrooke, Canada: Université de Sherbrooke.
Benmokrane, B., P. Wang, T. M. Ton-That, H. Rahman, and J. F. Robert. 2002. “Durability of glass fiber-reinforced polymer reinforcing bars in concrete environment.” J. Compos. Constr. 6 (3): 143–153. https://doi.org/10.1061/(ASCE)1090-0268(2002)6:3(143).
CSA (Canadian Standards Association). 2012. Design and construction of building components with fibre-reinforced polymers. CSA S806-12. Toronto, ON: CSA.
Diamond, S. 1981. “Effects of two Danish flyashes on alkali contents of pore solutions of cement-flyash pastes.” Cem. Concr. Res. 11 (3): 383–394. https://doi.org/10.1016/0008-8846(81)90110-1.
Gentry, T. R. 2011. “Transverse shear of GFRP rods: Test method development and potential for durability assessment.” In Proc., 4th Int. Conf. (CDCC-11). Sherbrooke, Canada: Univ. of Sherbrooke.
Porter, M. L., and B. A. Barnes. 1998. “Accelerated aging degradation of glass fiber composites.” In Proc., 2nd Int. Conf. on Composites in Infrastructure. Tucson, AZ: Univ. of Arizona.
Taylor, H. F. 1987. “A method for predicting alkazi ion concentrations in cement pore solutions.” Adv. Cem. Res. 1 (1): 5–17. https://doi.org/10.1680/adcr.1987.1.1.5.
Uomoto, T., and F. Katsuki. 1995. “Prediction of deterioration of FRP rods due to alkali attack, non-metallic (FRP) reinforced for concrete structures.” In Proc., 2nd Int. RILEM Symp. (FRPRCS-2). Ghent, Belgium: Universiteit Ghent.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: May 23, 2017
Accepted: May 9, 2018
Published online: Aug 10, 2018
Published in print: Oct 1, 2018
Discussion open until: Jan 10, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.