GFRP Reinforcement in Concrete after 15 Years of Service
Publication: Journal of Composites for Construction
Volume 21, Issue 5
Abstract
Glass fiber–reinforced polymer (GFRP) composite bar is emerging as a feasible and economical solution to eliminate the corrosion problem of steel reinforcements in concrete structures; thus, confirmation of its long-term durability is crucial. The objective of this study is to investigate the performance of GFRP bars exposed to concrete alkalinity and ambient conditions after 15 years of service. In order to monitor possible changes in GFRP and concrete, samples were extracted from a bridge for various types of analysis. Carbonation depth and pH of the concrete surrounding the GFRP bars were measured. Scanning electron microscopy (SEM) imaging and energy dispersive X-ray spectroscopy (EDS) were performed on GFRP coupons. Finally, GFRP horizontal shear strength, glass transition temperature (), and fiber content were measured and compared with the results of similar tests performed on control samples at the time of construction. The SEM and EDS did not show any sign of GFRP microstructural deterioration or change of chemical composition, and and fiber content were comparable to pristine values while the results of the horizontal shear strength were inconclusive. This study adds new evidence to the validation of the long-term durability of GFRP bars as concrete reinforcement in field applications.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge (1) the University Transportation Center “Research on Concrete; Applications for Sustainable Transportation (RE-CAST)” under Grant DTRT13-G-UTC45 from U.S. DOT; (2) the National Science Foundation (NSF) and its industrial members for the support provided to the industry-university Center for Integration of Composites into Infrastructure (CICI) under Grant IIP-1439543 from NSF; (3) Hughes Brothers Inc. for their openness in describing the past and present production processes, resin formulations, and assistance in field extraction; and (4) the Texas Department of Transportation Amarillo District for allowing the extraction of samples from their bridge and for providing the traffic control that kept the technicians safe during the coring operations. Findings and opinions expressed herein, however, are those of the authors alone and do not necessarily reflect the views of the sponsors.
References
ACI (American Concrete Institute). (2008). “Specification for carbon and glass fiber-reinforced polymer bar materials for concrete reinforcement.” ACI 440.6, Farmington Hills, MI.
ASTM. (2008a). “Standard practice for preparing concrete floors to receive resilient flooring.” ASTM F710-11, West Conshohocken, PA.
ASTM. (2008b). “Standard test method for apparent horizontal shear strength of pultruded reinforced plastic rods by the short-beam method.” ASTM D4475, West Conshohocken, PA.
ASTM. (2011). “Standard test method for ignition loss of cured reinforced resins.” ASTM D2584, West Conshohocken, PA.
ASTM. (2013a). “Standard test method for assignment of the glass transition temperature by dynamic mechanical analysis.” ASTM E1640, West Conshohocken, PA.
ASTM. (2013b). “Standard test methods for density and specific gravity (relative density) of plastics by displacement.” ASTM D792, West Conshohocken, PA.
Claure, G. (2015). “Non-traditional shape GFRP rebars for concrete reinforcement.” Ph.D. dissertation, Univ. of Miami, Coral Gables, FL.
Gooranorimi, O., Bradberry, T., Dauer, E., Myers, J., and Nanni, A. (2016). “FRP reinforcement for concrete: Performance assessment and new construction. Volume I: Sierrita de la Cruz Creek bridge.”, RE-CAST: Research on Concrete Applications for Sustainable Transportation, Rolla, MO.
Grubb, J., Limaye, H., and Kakade, A. (2007). “Testing pH of concrete: Need for a standard procedure.” Concr. Int., 29(4), 78–83.
Haley, J. (2011). “Climatology of freeze-thaw days in the conterminous United States: 1982-2009.” M.A. thesis, Kent Univ., Kent, OH.
ICC (International Code Council). (2015). “Acceptance criteria for fiber-reinforced polymers (FRP) bars for internal reinforcement of concrete members.”, Evaluation Service, Whittier, CA.
Micelli, F., and Nanni, A. (2004). “Durability of FRP rods for concrete structures.” J. Constr. Build. Mater., 18(7), 491–503.
Mufti, A., et al. (2005). “Durability of GFRP reinforced concrete in field structures.” ACI Spec. Public., 230, 1361–1378.
Mukherji, S., and Arwikar, S. J. (2005). “Performance of glass fiber-reinforced polymer reinforcing bars in tropical environments—Part II: Microstructural test.” ACI Struct. J., 102(6), 816–822.
Nanni, A., De Luca, A., and Jawaheri Zadeh, H. (2014). Reinforced concrete with FRP bars: Mechanics and design, CRC Press, Boca Raton, FL.
Phelan, R., Vann, W., and Bice, J. (2003). “FRP reinforcement bars in bridge decks: Field instrumentation and short-term monitoring.”, Texas Technical Univ., Multidisciplinary Research in Transportation, Lubbock, TX.
RILEM. (1988). “Measurement of hardened concrete carbonation depth.”, Paris, 453–455.
Sagues, A. (1997). “Carbonation in concrete and effect on steel corrosion.”, Dept. of Civil and Environmental Engineering, Univ. of South Florida, Tampa, FL.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Sep 10, 2016
Accepted: Dec 28, 2016
Published online: Mar 10, 2017
Discussion open until: Aug 10, 2017
Published in print: Oct 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.