Shear Transfer Mechanism of Concrete Strengthened with External CFRP Strips
Publication: Journal of Composites for Construction
Volume 21, Issue 2
Abstract
Concrete with reinforcing steel bars across a shear plane was strengthened using carbon fiber–reinforced polymer (CFRP) strips externally bonded to resist shear transfer. Specimens were designed and tested to give insight on shear transfer based on a component model. In this model, five components, i.e., the friction, aggregate interlock, adhesion, shear dilation, and dowel action, contributed to the overall shear resistance. Results indicated that the ultimate shear transfer capacities improved by 6 to 50% for specimens with steel reinforcement ratios varying from 0.46 to 1.20% and CFRP reinforcement ratios varying from 0.224 to 0.298%. The mechanism of shear resistance increase was due to the additional clamping force provided by CFRP strips, which led to a significant increase in the shear component of the adhesion. A best-fitting expression was presented to predict the ultimate shear transfer capacities of CFRP-strengthened concrete with satisfactory accuracy by comparing the calculated results with test data in this study and in literature. A general concept of equivalent reinforcement ratio was proposed to clarify the limitation of strengthening effect for shear transfer.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to extend their sincere gratitude to the National Science Foundation of China for the financial support (Grant No. 51578399).
References
ACI (American Concrete Institute). (2011). “Building code requirements for structural concrete and commentary.” ACI 318-11, Farmington Hills, MI.
ASCE-ACI Committee 445 on Shear and Torsion. (1998). “Recent approaches to shear design of structural concrete.” J. Struct. Eng., 1375–1417.
Birkeland, P. W., and Birkeland, H. W. (1966). “Connections in precast concrete construction.” ACI J. Proc., 63(3), 345–368.
CEB (Comité Euro-International du Béton). (2010). “Model Code 2010.” Lausanne, Switzerland.
Hofbeck, J. A., Ibrahim, I. O., and Mattock, A. H. (1969). “Shear transfer in reinforced concrete.” ACI J., 66(2), 119–128.
Lin, F., Lu, H. X., and Dong, Y. (2016). “Component model for shear transfer in reinforced concrete.” Mag. Concr. Res., 68(15), 755–767.
Lucas, W., Oehlers, D., Mohamed Sadakkathulla, M., and Griffith, M. (2012). “The FRP reinforced shear-friction mechanism.” Adv. Struct. Eng., 15(4), 615–623.
Mattock, A. H. (2001). “Shear friction and high-strength concrete.” ACI Struct. J., 98(1), 50–59.
Mattock, A. H., and Hawkins, N. M. (1972). “Shear transfer in reinforced concrete—Recent research.” PCI J., 17(2), 55–75.
Mattock, A. H., Li, W. K., and Wang, T. C. (1976). “Shear transfer in lightweight reinforced concrete.” PCI J., 21(1), 20–39.
MHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). (2002). “Standard for test method of mechanical properties on ordinary concrete.” GB/T 50081-2002, China Architecture & Building Press, Beijing (in Chinese).
MHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). (2006). “Design code for strengthening concrete structure.” GB50367-2006, China Architecture & Building Press, Beijing (in Chinese).
MHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). (2010). “Code for design of concrete structure.” GB50010-2010, China Architecture & Building Press, Beijing (in Chinese).
Millard, S. G., and Johnson, R. P. (1984). “Shear transfer across cracks in reinforced concrete due to aggregate interlock and to dowel action.” Mag. Concrete. Res., 36(126), 9–21.
Mohamed Ali, M., Oehlers, D., and Griffith, M. (2008). “Shear transfer across cracks in FRP strengthened RC members.” J. Compos. Constr., 416–424.
Naserian, R., Hosseini, A., and Marefat, M. S. (2013). “Assessment of shear transfer capacity of non-cracked concrete strengthened with external GFRP strips.” Constr. Build. Mater., 45, 224–232.
SAC (Standardization Administration of the People’s Republic of China). (2014). “Test method for tensile properties of orientation fiber reinforced polymer matrix composite materials.” GB/T 3354-2014, China Standards Press, Beijing (in Chinese).
Saenz, N., and Pantelides, C. P. (2005). “Shear friction capacity of concrete with external carbon FRP strips.” J. Struct. Eng., 1911–1919.
Santos, P. M., and Júlio, E. N. (2012). “A state-of-the-art review on shear-friction.” Eng. Struct., 45(12), 435–448.
Sonnenberg, A. M. C., Al-Mahaidi, R., and Taplin, G. (2003). “Behavior of concrete under shear and normal stresses.” Mag. Concr. Res., 55(4), 367–372.
Visintin, P., Chen, Y., and Oehlers, D. (2015). “Simulating the behavior of FRP-confined cylinders using the shear-friction mechanism.” J. Compos. Constr., 04015014.
Walraven, J., Frénay, J., and Pruijssers, A. (1987). “Influence of concrete strength and load history on the shear friction capacity of concrete members.” PCI J., 32(1), 66–84.
Walraven, J. C. (1981). “Fundamental analysis of aggregate interlock.” Struct. Div., 107(11), 2245–2270.
Wong, R. C. K., Ma, S. K. Y., Wong, R. H. C., and Chau, K. T. (2007). “Shear strength components of concrete under direct shearing.” Cem. Concr. Res., 37(8), 1248–1256.
Zhang, S., Che, Y., Xie, Q., and Xu, D. (2011). “Experimental research on shear transfer behavior in cracked reinforced concrete.” J. Build. Struct., 32(2), 48–53 (in Chinese).
Zilch, K., and Reinecke, R. (2000). “Capacity of shear joints between high-strength precast elements and normal-strength cast-in-place decks.” FIB Int. Symp. on High Performance Concrete, Precast/Prestressed Concrete Institute, Orlando, FL, 551–560.
Information & Authors
Information
Published In
Copyright
©2016 American Society of Civil Engineers.
History
Received: Feb 4, 2016
Accepted: Jul 27, 2016
Published online: Aug 16, 2016
Discussion open until: Jan 16, 2017
Published in print: Apr 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.