Influence of the Processing Techniques on the Bond Characteristics in Externally Bonded Joints: Experimental and Analytical Investigations
Publication: Journal of Composites for Construction
Volume 20, Issue 3
Abstract
This paper investigates the bond characteristics between the concrete substrate and fiber-reinforced polymer (FRP) material processed with advanced manufacturing techniques. Tests provide further understanding regarding the interface behavior of the joints manufactured with a heated vacuum bag only (HVBO), vacuum-assisted resin infusion (VARI), wet lay-up, and pultrusion techniques. A specific criterion, the equalization of the processing techniques, is proposed to compare the characteristics of the joints. Based on the outcomes, the advanced processing techniques such as HVBO and VARI can be successfully applied to achieve a high-quality bond in strengthening of the reinforced concrete structures. Furthermore, a new analytical approach is presented to determine the interface behavior, which can be applied to any type of the FRP processing technique.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Authors would like to gratefully acknowledge supports received from the RMIT University Higher Degree by Research Publication Grant (RMIT HDRPG), Inovas Pty. Ltd., Sika Australia Pty. Ltd., and Melbourne Testing Services Co. (MTS).
References
Agius, S. L., Magniez, K. J. C., and Fox, B. L. (2013). “Cure behaviour and void development within rapidly cured out-of-autoclave composites.” Composites Part B, 47, 230–237.
ASTM. (2008). “Standard test method for tensile properties of polymer matrix composite materials.” ASTM D3039/D3039M, West Conshohocken, PA.
Bizindavyi, L., and Neale, K. W. (1999). “Transfer lengths and bond strengths for composites bonded to concrete.” J. Compos. Constr., 153–160.
Brouwer, W. D., van Herpt, E. C. F. C., and Labordus, M. (2003). “Vacuum injection moulding for large structural applications.” Composites Part A, 34(6), 551–558.
Cao, S., Chen, J., Pan, J., and Sun, N. (2007). “ESPI measurement of bond-slip relationships of FRP-concrete interface.” J. Compos. Constr., 149–160.
Cender, T. A., Simacek, P. and Advani, S. G. (2013). “Resin film impregnation in fabric prepregs with dual length scale permeability.” Composites Part A, 53, 118–128.
Correia, N. C., Robitaille, F., Long, A. C., Rudd, C. D., Šimáček, P., and Advani, S. G. (2005). “Analysis of the vacuum infusion moulding process: I. Analytical formulation.” Composites Part A, 36(12), 1645–1656.
Dai, J., Ueda, T., and Sato, Y. (2005). “Development of the nonlinear bond stress-slip model of fiber reinforced plastics sheet-concrete interfaces with a simple method.” J. Compos. Constr., 52–62.
Edwards, K. L. (1998). “An overview of the technology of fibre-reinforced plastics for design purposes.” Mater. Des., 19(1–2), 1–10.
Foster, S. J., and Khomwan, N. (2005). “Determination of bond stress versus slip for externally bonded FRP from standardised bond strength tests.” Proc., Int. Symp. on Bond Behaviour of FRP in Structures, J. F. Chen and J. G. Teng, eds., International Institute for FRP in Construction, 85–90.
Gravina, R. J., Hadigheh, S. A., and Setunge, S. (2014). “Interfacial bond strength of resin impregnated fibre reinforced polymer laminates bonded to concrete using vacuum and heat: Experimental study.” Aust. J. Struct. Eng., 15(2), 189–201.
Gravina, R. J., Hadigheh, S. A., Setunge, S., and Kim, S. J. (2013). “Application of heat/resin injection in the presence of vacuum for FRP attachments on the concrete substrate.” Appl. Mech. Mater., 438–439, 459–466.
Hadigheh, S. A. (2014). “Bond behaviour of fibre reinforced polymer strengthened concrete structures using advanced composite processing techniques.” Ph.D. thesis, RMIT Univ., Melbourne, Australia.
Hadigheh, S. A., Gravina, R. J., and Setunge, S. (2013). “Experimental and analytical identification of interfacial bond characteristics in adhesively bonded joints.” Proc., 11th Int. Symp. on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS11), Univ. of Minho, Portugal.
Hadigheh, S. A., Gravina, R. J., and Setunge, S. (2015a). “Identification of the interfacial fracture mechanism in the FRP laminated substrates using a modified single lap shear test set-up.” Eng. Fract. Mech., 134, 317–329.
Hadigheh, S. A., Gravina, R. J., and Setunge, S. (2015b). “Prediction of the bond-slip law in externally laminated concrete substrates by an analytical based nonlinear approach.” Mater. Des., 66, 217–226.
Hadigheh, S. A., Gravina, R. J., Setunge, S., and Kim, S. J. (2012). “Experimental study on the bondline behavior between concrete and FRP materials.” Materials to Structures: Advancement through Innovation (ACMSM 22), CRC Press/Balkema, Netherlands, 505–11.
Hadigheh, S. A., Gravina, R. J., Setunge, S., and Kim, S. J. (2015c). “Bond characterization of adhesively bonded joints made with the resin infusion (RI) process.” Int. J. Adhesion Adhesives, 57, 13-21.
ICC Group. (2010). “Materials and processing data.” Perth, Australia.
Iwashita, K., Wu, Z., Ishikawa, T., Hamaguchi, Y., and Suzuki, T. (2007). “Bonding and debonding behavior of FRP sheets under fatigue loading.” Adv. Compos. Mater., 16(1), 31–44.
Karbhari, V. M., and Zhao, L. (2000). “Use of composites for 21st century civil infrastructure.” Comput. Methods Appl. Mech. Eng., 185(2–4), 433–454.
Liu, K., and Wu, Y.-F. (2012). “Analytical identification of bond-slip relationship of EB-FRP joints.” Composites Part B, 43(4), 1955–1963.
López-González, J., Fernández-Gómez, J., and González-Valle, E. (2012). “Effect of adhesive thickness and concrete strength on FRP-concrete bonds.” J. Compos. Constr., 705–711.
Martinelli, E., Czaderski, C., and Motavalli, M. (2011). “Modeling in-plane and out-of-plane displacement fields in pull-off tests on FRP strips.” Eng. Struct., 33(12), 3715–3725.
Mazzotti, C., Savoia, M., and Ferracuti, B. (2008). “An experimental study on delamination of FRP plates bonded to concrete.” Constr. Build. Mater., 22(7), 1409–1421.
Roberts, T. M. (1989). “Approximate analysis of shear and normal stress concentrations in the adhesive layer of plated RC beams.” Struct. Eng., 67(12), 229–233.
Subramaniam, K. V., Carloni, C., and Nobile, L. (2007). “Width effect in the interface fracture during shear debonding of FRP sheets from concrete.” Eng. Fract. Mech., 74(4), 578–594.
Taljsten, B. (1994). “Plate bonding: Strengthening of existing concrete structures with epoxy bonded plates of steel or fibre reinforced plastics.” Ph.D. thesis, Luleå Univ. of Technology, Sweden.
Tavares, S. S., Michaud, V., and Månson, J. A. E. (2010). “Assessment of semi-impregnated fabrics in honeycomb sandwich structures.” Composites Part A, 41(1), 8–15.
Teoh, K. J., and Hsiao, K.-T. (2011). “Improved dimensional infidelity of curve-shaped VARTM composite laminates using a multi-stage curing technique—Experiments and modeling.” Composites Part A, 42(7), 762–771.
Yao, J., Teng, J. G., and Chen, J. F. (2005). “Experimental study on FRP-to-concrete bonded joints.” Composites Part B, 36(2), 99–113.
Zhou, Y.-W., Wu, Y.-F., and Yun, Y. (2010). “Analytical modeling of the bond-slip relationship at FRP-concrete interfaces for adhesively-bonded joints.” Compos. Part B, 41(6), 423–433.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Mar 17, 2015
Accepted: Sep 22, 2015
Published online: Dec 16, 2015
Discussion open until: May 16, 2016
Published in print: Jun 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.