Experimental and Numerical Investigation of Elephant Foot Buckling and Retrofitting of Cylindrical Shells by FRP
Publication: Journal of Composites for Construction
Volume 20, Issue 4
Abstract
Large and small cylindrical shells have long been used as tanks and silos to store materials such as oil and its derivatives. The radius-to-thickness ratio of these shells is ; as a result, buckling collapse of these thin-walled structures is of major concern for designers. The present study examined inelastic buckling behavior of cylindrical shells near the base, known as elephant foot buckling. This form of buckling occurs under high internal pressure exerted simultaneously with axial compression. The buckling of cylindrical shells subjected to combined axial loads and internal pressure was experimentally studied and tested and a new method of strengthening steel cylindrical shells using fiber-reinforced polymer (FRP) composite materials is presented. The proposed method was studied by numerical methods using a nonlinear algorithm, and the results were evaluated for resistance to buckling of cylindrical shells. The results provide effective and useful information for use in retrofitting cylindrical shell tanks.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS version 6.10.1 [Computer software]. Dassault Systèmes, Waltham, MA.
Al-Kashif, M. A., Ramadan, H., Rashed, A., and Haroun, M. A. (2010). “Effect of FRP composites on buckling capacity of anchored steel tanks.” Steel Compos. Struct., 10(4), 361–371.
Al-Saidy, A. H., Klaiber, F. W., and Wipf, T. J. (2004). “Repair of steel composite beams with carbon fiber reinforced polymer plates.” J. Compos. Constr., 163–172.
Batikha, M., Chen, J., Rotter, J., and Teng, J. (2009). “Strengthening metallic cylindrical shells against elephant’s foot buckling with FRP.” Thin-Walled Struct., 47(10), 1078–1091.
Batikha, M., Chen, J. F., and Rotter, M. (2008). “Fibre reinforced polymer composites to increase the buckling strength of imperfect cylindrical shells.” Int. Conf. on Structures and Granular Solids-From Scientific Principles to Engineering Applications, J. F. Chen and J. G. Teng, eds., CRC Press, Boca Raton, FL, 177–181.
CEN. (2006a). “Eurocode 3: Design of steel structures—Part 4-1: Silos.” EN 1993-4-1, Brussels, Belgium.
CEN. (2006b). “Eurocode 3: Design of steel structures—Part 4-2: Tanks.” EN 1993-4-2, Brussels, Belgium.
Chen, J. F., Rotter, J. M., and Teng, J. G. (2006). “A simple remedy for elephant’s foot buckling in cylindrical silos and tanks.” Adv. Struct. Eng., 9(3), 409–420.
Chen, Z., Sun, B., Yu, C., Fang, Z., and Zeng, M. (2009). “Comparison of the strength design and prevention method of elephant foot buckling among countries’ standards of oil tanks.” ASME 2009 Pressure Vessels and Piping Conf., Vol. 1, Prague, Czech Republic, 461–466.
Chen, Z., Yan, S., Yu, C., Cao, G., Wang, L., and Yang, L. (2011). “Effect of opening on elephant’s foot buckling of large oil tanks.” Adv. Mater. Res., 163–167, 169–172.
Chonghou, Z., Yansheng, L., and Goto, Y. (2008). “Plastic buckling of cylindrical shells under transverse loading.” Tsinghua Sci. Technol., 13(2), 202–210.
Colombi, P., and Poggi, C. (2006). “An experimental, analytical and numerical study of the static behavior of steel beams reinforced by pultruded CFRP strips.” Composites Part B, 37(1), 64–73.
ECCS (European Convention for Constructional Steelwork). (2008). Buckling of steel shells: European design recommendations, 5th Ed., J. M. Rotter and H. Schmidt, eds., Brussels, Belgium.
Elkashef, M., Rashed, A., and Haroun, M. (2014). “A study on the elephant-foot bulge formation of anchored steel tanks.” Aust. J. Struct. Eng., 15(3), 321–335.
Fang, Z., Chen, Z. P., Lu, C. L., and Zeng, M. (2010). “Effect of weld on axial buckling of cylindrical shells.” Adv. Mater. Res., 139–141, 171–175.
Kim, Y. J., and Harries, K. A. (2011). “Behaviour of tee-section bracing members retrofitted with CFRP strips subjected to axial compression.” Composites Part B, 42(4), 789–800.
Miller, T. C., Chajes, M. J., Mertz, D. R., and Hastings, J. (2001). “Strengthening of a steel bridge girder using FRP plates.” J. Bridge Eng., 514–522.
Rotter, J. M. (1987). “Bending theory of shells for bins and silos.” Trans. Mech. Eng., ME12(3), 147–159.
Rotter, J. M. (1990). “Local inelastic collapse of pressurized thin cylindrical steel shells under axial compression.” J. Struct. Eng., 1955–1970.
Rotter, J. M. (2006). “Elephant’s foot buckling in pressurized cylindrical shells.” Stahlbau, 75(9), 742–747.
Rotter, J. M., and Seide, P. (1987). “On the design of unstiffened cylindrical shells subject to axial load and internal pressure.” Stability of Plate and Shell Structures: Proc., Int. Colloquium, P. Dubas and D. Vandepitte, eds., Rijksuniversiteit, Groningen, Netherlands, 539–548.
Sallam, H. E. M., Ahmad, S. S. E., Badawy, A. A. M., and Mamdouh, W. (2006). “Evaluation of steel I-beams strengthened by various plating methods.” Adv. Struct. Eng., 9(4), 535–544.
Schnerch, D., and Rizkalla, S. (2008). “Flexural strengthening of steel bridges with high modulus CFRP strips.” J. Bridge Eng., 192–201.
Shaat, A., and Fam, A. Z. (2009). “Slender steel columns strengthened using high-modulus CFRP plates for buckling control.” J. Compos. Constr., 2–12.
Silvestre, N., Camotim, D., and Young, B. (2009). “On the use of the EC3 and AISI specifications to estimate the ultimate load of CFRP-strengthened cold-formed steel lipped channel columns.” Thin-Walled Struct., 47(10), 1102–1111.
Teng, J., and Hu, Y. M. (2007). “Behaviour of FRP-jacketed circular steel tubes and cylindrical shells under axial compression.” Constr. Build. Mater., 21(4), 827–838.
Teng, J. G., and Hu, Y. M. (2004). “Suppression of local buckling in steel tubes by FRP jacketing.” Proc., 2nd Int. Conf. on FRP Composites in Civil Engineering-CICE 2004, R. Seracino, ed., Taylor & Francis, Adelaide, Australia, 749–753.
Yang, L., Chen, Z., Cao, G., Yu, C., and Guo, W. (2013). “An analytical formula for elastic-plastic instability of large oil storage tanks.” Int. J. Press. Vessels Pip., 101, 72–80.
Zhou, M., Ziieng, S., and Zhang, W. (1992). “Study on elephant foot buckling of broad liquid storage tanks by nonlinear theory of shells.” Comput. Struct., 44(4), 783–788.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jun 2, 2015
Accepted: Sep 16, 2015
Published online: Dec 30, 2015
Discussion open until: May 30, 2016
Published in print: Aug 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.