Cyclic and Monotonic Compression Behavior of CFRP-Jacketed Damaged Noncircular Concrete Prisms
Publication: Journal of Composites for Construction
Volume 20, Issue 1
Abstract
This paper focuses on rehabilitation/strengthening of damaged concrete prisms through external carbon-fiber-reinforced polymer (CFRP) jacketing. In order to evaluate the efficiency of the strengthening method on the damaged concrete prisms, an experimental study including 22 concrete prisms with square and rectangular cross sections was carried out. The parameters of the experimental study are the damage levels. Furthermore, effects of loading scheme (monotonic or cyclic) and cross section type (square and rectangular) were investigated in the existence of damage. The concrete prisms were tested under compression stresses up to three specified axial deformation levels to be representative of slight, moderate, and severe compression damages before strengthening. Tests were repeated after rehabilitation/strengthening of damaged specimens with CFRP jacketing. Test results showed that CFRP rehabilitation/strengthening was effective on enhancement of strength and deformability of the damaged concrete prisms. However, the efficiency of the strengthening method in terms of compressive strength tended to reduce when the level of damage increased. Furthermore, an available model is modified to include the effects of damage level, and the modified model is shown to produce accurate results.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to express their appreciation to BASF-Turkey Construction Chemicals Company and product manager Mr. Talat Sivrioglu (MSc) for financial and material support. The authors would also like to express their gratitude to the MSc students Mr. Saeid Hajihosseynlou, Mr. Ali Osman Ates, Mr. Amin Nasrinpour, and intern student Mr. Gorkem Dalgic for their help throughout the study. The authors would also like to thank staff of Istanbul Technical University Building Materials Laboratory.
References
Bahn, B. Y., and Hsu, C. T. (1998). “Stress-strain behavior of concrete under cyclic loading.” ACI Mater. J., 95(2), 178–193.
Bai, Y. L., Dai, J. G., and Teng, J. G. (2014). “Cyclic compressive behavior of concrete confined with large rupture strain FRP composites.” J. Compos. Constr., 04013025.
Cui, C. (2009). “Behaviour of normal and high strength concrete confined with fibre reinforced polymers (FRP).” Ph.D. thesis, Univ. of Toronto, Toronto.
De Lorenzis, L., and Tepfers, R. (2003). “Comparative study of models on confinement of concrete cylinders with fiber-reinforced polymer composites.” J. Compos. Constr., 219–237.
Demers, M., and Neale, K. (1999). “Confinement of reinforced concrete columns with fibre-reinforced composite sheets—An experimental study.” Can. J. Civ. Eng., 26(2), 226–241.
Ghernouti, Y., Li, A., and Rabehi, B. (2012). “Effectiveness of repair on damaged concrete columns by using fiber-reinforced polymer composite and increasing concrete section.” J. Reinf. Plast. Compos., 31(23), 1616–1629.
Ilki, A., and Kumbasar, N. (2002). “Behavior of damaged and undamaged concrete strengthened by carbon fiber composite sheets.” Struct. Eng. Mech., 13(1), 75–90.
Ilki, A., and Kumbasar, N. (2003). “Compressive behaviour of carbon fibre composite jacketed concrete with circular and prismatic cross-sections.” J. Earthquake Eng., 7(3), 381–406.
Ilki, A., Kumbasar, N., and Koc, V. (2002). “Strength and deformability of low strength concrete confined by carbon fiber composite sheets.” 15th ASCE Engineering Mechanics Conf., Columbia Univ., New York.
Ilki, A., Kumbasar, N., and Koc, V. (2004). “Low strength concrete members externally confined with FRP sheets.” Struct. Eng. Mech., 18(2), 167–194.
Ilki, A., Peker, O., Karamuk, E., Demir, C., and Kumbasar, N. (2008). “FRP retrofit of low and medium strength circular and rectangular reinforced concrete columns.” J. Mater. Civ. Eng., 169–188.
Ispir, M., Dalgic, K. D., Sengul, C., Kuran, F., Tasdemir, M. A., and Ilki, A. (2010). “Modulus of elasticity of low strength concrete.” 9th Int. Conf. on Advances in Civil Engineering (ACE 2010), Karadeniz Technical Univ., Trabzon, Turkey.
Lam, L., and Teng, J. G. (2002). “Strength models for fibre-reinforced plastic-confined concrete.” J. Struct. Eng., 612–623.
Lam, L., and Teng, J. G. (2003). “Design-oriented stress-strain model for FRP-confined concrete.” Constr. Build. Mater., 17(6–7), 471–489.
Lam, L., and Teng, J. G. (2004). “Ultimate condition of fiber reinforced polymer-confined concrete.” J. Compos. Constr., 539–548.
Lam, L., Teng, J. G., Cheung, C. H., and Xiao, Y. (2006). “FRP-confined concrete under axial cyclic compression.” Cem. Concr. Compos., 28(10), 949–958.
Liu, H., Liao, W., Tseng, L., Lee, W.-H., and Sawada, Y. (2004). “Compression strength of pre-damaged concrete cylinders reinforced by non-adhesive filament wound composites.” Composites Part A, 35(2), 281–292.
Ma, G., Li, H., and Duan, Z. (2012). “Repair effects and acoustic emission technique-based fracture evaluation for pre-damaged concrete columns confined with fiber-reinforced polymers.” J. Compos. Constr., 626–639.
Ma, G., Li, H., and Wang, J. (2013). “Experimental study of the seismic behaviour of an earthquake-damaged reinforced concrete frame structure retrofitted with basalt fiber-reinforced polymer.” J. Compos. Constr., 04013002.
Manos, G. C, Stavroy, D. S., Dimosthenous, M. A., and Kourtides, B. (2004). “Experimental and analytical investigation of repaired and strengthened reinforced concrete structural elements utilizing CFRP.” 13th World Conf. on Earthquake Engineering, Vancouver, Canada.
Matthys, S., Toutanji, H., and Taerwe, L. (2006). “Stress-strain behavior of large-scale circular columns confined with FRP composites.” J. Struct. Eng., 123–133.
Mirmiran, A., and Shahawy, S. (1997). “Behavior of concrete columns confined by fiber composites.” J. Struct. Eng., 583–590.
Nanni, A., and Bradford, N. M. (1995). “FRP jacketed concrete under uniaxial compression.” Constr. Build. Mater., 9(2), 115–124.
Ozbakkaloglu, T., and Akin, E. (2012). “Behavior of FRP-confined normal and high-strength concrete under cyclic axial compression.” J. Compos. Constr., 451–463.
Ozbakkaloglu, T., and Lim, J. C. (2013). “Axial compressive behavior of FRP-confined concrete: Experimental test database and a new design-oriented model.” Composites Part B, 55, 607–634.
Pantelides, C. P., and Yan, Z. (2007). “Confinement model of concrete with externally bonded FRP jackets or posttensioned FRP shells.” J. Struct. Eng., 1288–1296.
Parvin, A., and Wang, W. (2001). “Behavior of FRP jacketed concrete columns under eccentric loading.” J. Compos. Constr., 146–152.
Pellegrino, C., and Modena, C. (2010). “Analytical model for FRP confinement of concrete columns with and without internal steel reinforcement.” J. Compos. Constr., 693–705.
Pham, T. M., and Hadi, M. N. S. (2014). “Stress prediction model for FRP confined rectangular concrete columns with rounded corners.” J. Compos. Constr., 04013019.
Rousakis, T. C., Rakitzis, T. D., and Karabinis, A. I. (2012). “Design-oriented strength model for FRP confined concrete members.” J. Compos. Constr., 615–625.
Saadatmanesh, H., Ehsani, M. R., and Jin, L. (1997). “Repair of earthquake-damaged RC columns with FRP wraps.” ACI Struct. J., 94(2), 206–214.
Samaan, M., Mirmiran, A., and Shahawy, M. (1998). “Model of concrete confined by fibre composites.” J. Struct. Eng., 1025–1031.
Shao, Y., Zhu, Z., and Mirmiran, A. (2006). “Cyclic modelling of FRP-confined concrete with improved ductility.” Cem. Concr. Compos., 28(10), 959–968.
Tan, K. H. (2002). “Strength enhancement of rectangular reinforced concrete columns using fibre-reinforced polymer.” J. Compos. Constr., 175–183.
Toutanji, H., Han, M., Gilbert, J., and Matthys, S. (2010). “Behavior of large-scale rectangular columns confined with FRP composites.” J. Compos. Constr., 62–71.
Toutanji, H. A. (1999). “Stress-strain characteristics of concrete columns externally confined with advanced fibre composite sheets.” ACI Mater. J., 96(3), 397–404.
TSDC (Turkish Seismic Design Code). (2007). “Regulation for buildings in seismic areas.” Ministry of Public Works and Housing (in Turkish).
Vintzileou, E., and Panagiotidou, E. (2008). “An empirical model for predicting the mechanical properties of FRP-confined concrete.” Constr. Build. Mater., 22(5), 841–854.
Wang, Z., Wang, D., Smith, S. T., and Lu, D. (2012a). “CFRP-confined square RC columns. I: Experimental investigation.” J. Compos. Constr., 150–160.
Wang, Z., Wang, D., Smith, S. T., and Lu, D. (2012b). “CFRP-confined square RC columns. II: Cyclic axial compression stress-strain model.” J. Compos. Constr., 161–170.
Wei, H., Wu, Z., Guo, X., and Yi, F. (2009). “Experimental study on partially deteriorated strength concrete columns confined with CFRP.” Eng. Struct., 31(10), 2495–2505.
Wei, Y., and Wu, Y. (2012). “Unified stress-strain model of concrete for FRP-confined columns.” Constr. Build. Mater., 26(1), 381–392.
Wu, Y., Yun, Y., Wei, Y., and Zhou, Y. (2014). “Effect of predamage on the 834 stress-strain relationship of confined concrete under monotonic loading.” J. Struct. Eng., 04014093.
Xiao, Y., and Wu, H. (2000). “Compressive behaviour of concrete confined by carbon fibre composite jackets.” J. Mater. Civ. Eng., 139–146.
Information & Authors
Information
Published In
Journal of Composites for Construction
Volume 20 • Issue 1 • February 2016
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Dec 23, 2014
Accepted: Jun 8, 2015
Published online: Jul 29, 2015
Discussion open until: Dec 29, 2015
Published in print: Feb 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.