Bond-Test Protocol for Plate-to-Concrete Interface Involving All Mechanisms
Publication: Journal of Composites for Construction
Volume 20, Issue 1
Abstract
Attaching reinforcing material such as steel or fiber reinforced polymer (FRP) plate to the external face of concrete members is a conventional technology used for strengthening concrete structures. Generally, three mechanisms are involved in the composite action between the concrete and the attachment: adhesion, dowel action, and friction. Methods have been developed for the identification of the interfacial bond properties when only one or two mechanisms exist at the interface. However, the existing methods cannot be used when all three mechanisms coexist. A methodology for testing the bond and the corresponding data interpretation procedure are proposed in this work to identify the bond properties of the interface involving all bonding mechanisms. As the bonding mechanisms are coupled and interact with each other, it is impossible to test all of them individually and separately. The proposed test protocol involves an analytical procedure that decouples individual mechanisms from the global response curves. Furthermore, conventional bond test methods involve extensive and labor-intensive strain gauging as well as complicated data regression analyses of test results in order to obtain the bond properties. The proposed method requires only the simplest instrumentation to measure displacement and load, without strain gauging. Test data processing also involves simple graphical interpretations only, without complicated and tedious mathematical data regression analyses. Therefore, the proposed method has advantages over the existing ones and can be easily adopted in engineering practice.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Students Cheung Wing Chong, Gai Chao, Wong Lai Shan, and Zhao Ming Xin took part in the experimental works. The work described in this paper was fully supported by Research Grant Council, Hong Kong Special Administrative Zone, China (Project No. CityU124113) and the National Natural Science Foundation of China (Grant No. 51378449).
References
Ali-Ahmad, M., Subramaniam, K., and Ghosn, M. (2006). “Experimental investigation and fracture analysis of debonding between concrete and FRP sheets.” J. Eng. Mech., 914–923.
Bank, L. C. (2004). “Mechanically-fastened FRP (MF-FRP)—A viable alternative for strengthening RC members.” Proc., 2nd Int. Conf. on FRP Composites in Civil Engineering—CICE 2004, Taylor & Francis, London, 3.
Bizindavyi, L., and Neale, K. W. (1999). “Transfer lengths and bond strengths for composites bonded to concrete.” J. Compos. Constr., 153–160.
Brena, S. F., Bramblett, R. M., Wood, S. L., and Kreger, M. E. (2003). “Increasing flexural capacity of reinforced concrete beams using carbon fiber-reinforced polymer composites.” ACI Struct. J., 100(1), 36–46.
Buyukozturk, O., Gunes, O., and Karaca, E. (2004). “Progress on understanding debonding problems in reinforced concrete and steel members strengthened using FRP composites.” Constr. Build. Mater., 18(1), 9–19.
Chang, X., and Wu, Y. F. (2014). “An analytical model for predicting the response of RC beams strengthened with strain localized steel plate.” Constr. Build. Mater., 74, 140–150.
Chen, J., and Pan, W. (2006). “Three dimensional stress distribution in FRP-to-concrete bond test specimens.” Constr. Build. Mater., 20(1), 46–58.
Chen, J., and Teng, J. (2001). “Anchorage strength models for FRP and steel plates bonded to concrete.” J. Struct. Eng., 127(7), 784–791.
Dai, J., Ueda, T., and Sato, Y. (2005). “Development of the nonlinear bond stress-slip model of fiber reinforced plastics sheet-concrete interfaces with a simple method.” J. Compos. Constr., 52–62.
D’Ambrisi, A., Feo, L., and Focacci, F. (2012). “Bond-slip relations for PBO-FRCM materials externally bonded to concrete.” Composites Part B, 43(8), 2938–2949.
De Lorenzis, L., Miller, B., and Nanni, A. (2001). “Bond of fiber-reinforced polymer laminates to concrete.” ACI Mater. J., 98(3), 256–264.
Ekenel, M., Rizzo, A., Myers, J. J., and Nanni, A. (2006). “Flexural fatigue behavior of reinforced concrete beams strengthened with FRP fabric and precured laminate systems.” J. Compos. Constr., 433–442.
Garden, H., and Hollaway, L. (1998). “An experimental study of the influence of plate end anchorage of carbon fibre composite plates used to strengthen reinforced concrete beams.” Compos. Struct., 42(2), 175–188.
Ghen, J., Yang, Z., and Holt, G. (2001). “FRP or steel plate-to-concrete bonded joints: Effect of test methods on experimental bond strength.” Steel Compos. Struct., 1(2), 231–244.
Hassan, T., and Rizkalla, S. (2002). “Flexural strengthening of prestressed bridge slabs with FRP systems.” PCI J., 47(1), 76–93.
Jiang, C., Wu, Y. F., and Wu, G. (2014). “Plastic hinge length of FRP-confined square RC columns.” J. Compos. Constr., 04014003.
Kotynia, R., Abdel Baky, H., Neale, K. W., and Ebead, U. A. (2008). “Flexural strengthening of RC beams with externally bonded CFRP systems: Test results and 3D nonlinear FE analysis.” J. Compos. Constr., 190–201.
Lamanna, A. J., Bank, L. C., and Borowicz, D. T. (2004). “Mechanically fastened FRP strengthening of large scale RC bridge T beams.” Adv. Struct. Eng., 7(6), 525–538.
Liu, K., and Wu, Y. F. (2012). “Analytical identification of bond-slip relationship of EB-FRP joints.” Composites Part B, 43(4), 1955–1963.
Martin, J. A., and Lamanna, A. J. (2008). “Performance of mechanically fastened FRP strengthened concrete beams in flexure.” J. Compos. Constr., 257–265.
Masoud, S., Soudki, K., and Topper, T. (2005). “Postrepair fatigue performance of FRP-repaired corroded RC beams: Experimental and analytical investigation.” J. Compos. Constr., 441–449.
Mazzotti, C., Savoia, M., and Ferracuti, B. (2008). “An experimental study on delamination of FRP plates bonded to concrete.” Constr. Build. Mater., 22(7), 1409–1421.
Monti, G., Renzelli, M., and Luciani, P. (2003). “FRP adhesion in uncracked and cracked concrete zones.” Proc., 6th Int. Symp. on FRP Reinforcement for Concrete Structures (FRPRCS-6), World Scientific, Singapore, 183–192.
Pan, J., and Leung, C. K. (2007). “Effect of concrete composition on FRP/concrete bond capacity.” J. Compos. Constr., 611–618.
Popovics, S. (1973). “A numerical approach to the complete stress-strain curve of concrete.” Cem. Concr. Res., 3(5), 583–599.
Ritchie, P. A., Thomas, D. A., Lu, L. W., and Conelly, G. M. (1991). “External reinforcement of concrete beams using fiber reinforced plastics.” ACI Struct. J., 88(4), 490–500.
Shi, J., Zhu, H., Wu, Z., Seracino, R., and Wu, G. (2013). “Bond behavior between basalt fiber-reinforced polymer sheet and concrete substrate under the coupled effects of freeze-thaw cycling and sustained load.” J. Compos. Constr., 530–542.
Siddiqui, N. A. (2010). “Experimental investigation of RC beams strengthened with externally bonded FRP composites.” Latin Am. J. Solids Struct., 6(4), 343–362.
Smith, S. T., Hu, S., Kim, S. J., and Seracino, R. (2011). “FRP-strengthened RC slabs anchored with FRP anchors.” Eng. Struct., 33(4), 1075–1087.
Smith, S. T., and Teng, J. (2001). “Debonding failures in FRP-plated RC beams with or without U strip end anchorage.” Proc., Int. Conf. on FRP Composites in Civil Engineering, Elsevier, New York, 607–615.
Spadea, G., Bencardino, F., and Swamy, R. (1998). “Structural behavior of composite RC beams with externally bonded CFRP.” J. Compos. Constr., 132–137.
Swamy, R., and Mukhopadhyaya, P. (1999). “Debonding of carbon-fibre-reinforced polymer plate from concrete beams.” Proc. ICE Struct. Build., 134(4), 301–317.
Täljsten, B. (1997). “Defining anchor lengths of steel and CFRP plates bonded to concrete.” Int. J. Adhes. Adhes., 17(4), 319–327.
Teng, J., Chen, J., Smith, S. T., and Lam, L. (2003). “Behaviour and strength of FRP-strengthened RC structures: A state-of-the-art review.” Proc. ICE Struct. Build., 156(1), 51–62.
Wang, Y. C., and Hsu, K. (2009). “Design recommendations for the strengthening of reinforced concrete beams with externally bonded composite plates.” Compos. Struct., 88(2), 323–332.
Woo, S. K., and Lee, Y. (2010). “Experimental study on interfacial behavior of CFRP-bonded concrete.” KSCE J. Civ. Eng., 14(3), 385–393.
Wu, Y. F., and Chang, X. (2014). “Debonding inhibiting mechanism of strain localization plating system.” J. Struct. Eng., 04014049.
Wu, Y. F., Griffith, M. C., and Oehlers, D. J. (2003). “Improving the strength and ductility of rectangular reinforced concrete columns through composite partial interaction: Tests.” J. Struct. Eng., 1183–1190.
Wu, Y. F., and Huang, Y. (2008). “Hybrid bonding of FRP to reinforced concrete structures.” J. Compos. Constr., 266–273.
Wu, Y. F., and Jiang, C. (2013a). “Quantification of bond-slip relationship for externally bonded FRP-to-concrete joints.” J. Compos. Constr., 673–686.
Wu, Y. F., and Jiang, J. F. (2013b). “Effective strain of FRP for confined circular concrete columns.” Compos. Struct., 95, 479–491.
Wu, Y. F., and Liu, K. (2013). “Characterization of mechanically enhanced FRP bonding system.” J. Compos. Constr., 34–49.
Wu, Y. F., and Lu, J. (2013). “Preventing debonding at the steel to concrete interface through strain localization.” Composites Part B, 45(1), 1061–1070.
Wu, Y. F., Wang, Z. Y., Liu, K., and He, W. (2009). “Numerical analyses of hybrid-bonded FRP strengthened concrete beams.” Comput.-Aided Civ. Infrastruct. Eng., 24(5), 371–384.
Wu, Y. F., Xu, X. S., Sun, J. B., and Jiang, C. (2012). “Analytical solution for the bond strength of externally bonded reinforcement.” Compos. Struct., 94(11), 3232–3239.
Wu, Y. F., Yan, J. H., Zhou, Y. W., and Xiao, Y. (2010). “Ultimate strength of reinforced concrete beams retrofitted with hybrid bonded fiber-reinforced polymer.” ACI Struct. J., 107(4), 451–459.
Wu, Z., Yuan, H., and Niu, H. (2002). “Stress transfer and fracture propagation in different kinds of adhesive joints.” J. Eng. Mech., 562–573.
Wu, Z. M., Hu, C. H., Wu, Y. F., and Zheng, J. J. (2011a). “Application of improved hybrid bonded FRP technique to FRP debonding prevention.” Constr. Build. Mater., 25(6), 2898–2905.
Wu, Z. M., Hu, C. H., Wu, Y. F., and Zheng, J. J. (2011b). “Improved hybrid bonding technique for attaching FRP to reinforced concrete beams.” Mag. Concr. Res., 63(11), 861–869.
Yao, J., Teng, J. G, and Chen, J. F. (2005). “Experimental study on FRP-to-concrete bonded joints.” Composites Part B, 36(2), 99–113.
Yuan, H., Chen, J., Teng, J. G., and Lu, X. (2007). “Interfacial stress analysis of a thin plate bonded to a rigid substrate and subjected to inclined loading.” Int. J. Solids Struct., 44(16), 5247–5271.
Yuan, H., Teng, J. G., Seracino, R., Wu, Z., and Yao, J. (2004). “Full-range behavior of FRP-to-concrete bonded joints.” Eng. Struct., 26(5), 553–565.
Yun, Y., and Wu, Y. F. (2011). “Durability of CFRP-concrete joints under freeze-thaw cycling.” Cold Reg. Sci. Technol., 65(3), 401–412.
Yun, Y., Wu, Y. F., and Tang, W. C. (2008). “Performance of FRP bonding systems under fatigue loading.” Eng. Struct., 30(11), 3129–3140.
Zhang, H., Smith, S. T., and Kim, S. (2012). “Optimisation of carbon and glass FRP anchor design.” Constr. Build. Mater., 32, 1–12.
Zhou, Y. W., Wu, Y. F., and Yun, Y. (2010). “Analytical modeling of the bond-slip relationship at FRP-concrete interfaces for adhesively-bonded joints.” Composites Part B, 41(6), 423–433.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Nov 22, 2014
Accepted: Mar 12, 2015
Published online: May 13, 2015
Discussion open until: Oct 13, 2015
Published in print: Feb 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.