Reviewers

Sincere thanks are extended to the following individuals who reviewed manuscripts submitted for publication in the Journal of Composites for Construction during the period of September 1, 2013, to August 31, 2014. Their help was essential in maintaining the quality of the journal.

Amr Abdelrahman, Ain Shams University

Mithila Achintha, University of Southampton

Felipe Acosta, University of Puerto Rico, Mayaguez Campus

Bimal Adhikary, City of Austin

Ehab Ahmed, University of Sherbrooke

Namshik Ahn, Sejong University

John Aidoo, Rose-Hulman Institute of Technology

Maria Antonietta Aiello, Università del Salento

Firas Al Mahmoud, Université Nancy-1 Institut Jean Lamour

Md Shah Alam, SNC-Lavalin Inc.

Rania Al-Hammoud, University of Minnesota Duluth

Tarek Alkhrdaji, Structural Group

Riadh Al-Mahaidi, Swinburne University of Technology

Luis Almeida Bernardo, Universidade of Beira Interior

Tarek H. Almusallam, King Saud University

Yousef A. Al-Salloum, King Saud University

Martin Ansell, University of Bath

Marco Arduini, Co-Force

Amjad J. Aref, State University of New York at Buffalo

M. Arockiasamy, Florida Atlantic University

Domenico Asprone, University "Federico II" of Naples

Rebecca Atadero, Colorado State University

Ching Au, RSM Electron Power

Hossein Azimi, Ryerson University

Saman Babaeidarabad, University of Miami

Sang-Wook Bae, Texas Tech University

Jesus Bairan, Universitat Politecnica de Catalunya (BarcelonaTech)

Hussien Baky, SNC-Lavalin Inc.

Ioannis Balafas, University of Cyprus

Lawrence C. Bank, City College of New York

Paul Barr, Utah State University

Eduardo Batista, COPPE, Federal University of Rio de Janeiro

Brahim Benmokrane, University of Sherbrooke

Caroline Bennett, University of Kansas

Elena Benvenuti, Engineering Department, University of Ferrara

Antonio Bilotta, University of Naples Federico II

Baris Binici, Middle East Technical University

Luigi Biolzi, Politecnico di Milano

Luke A. Bisby, University of Edinburgh

Hugo Biscaia, Nova University of Lisbon

Peter H. Bischoff, University of New Brunswick

Dionysis Biskinis, University of Patras

Gregg J. Blaszak, BG International

Massimiliano Bocciarelli, Politecnico di Milano

Moh Boulfiza, University of Saskatchewan

Stathis N. Bousias, University of Patras

Jeff R. Brown, Embry-Riddle Aeronautical University

Vicki Brown, Widener University

Harald Budelmann, Technische Universität Braunschweig

Chris Burgoyne, University of Cambridge

Rigoberto Burgueno, Michigan State University

Stefan L. Burtscher, Vienna University of Technology

Christian Carloni, University of Hartford

Ronaldson Jose de Franca Mendes Carneiro, Federal University of Para

Ricardo Carrazedo, University of São Paulo

Joan R. Casas, Technical University of Catalonia

Scott W. Case, Virginia Tech

Giulio Castori, University of Perugia

Giuseppe Cefarelli, University of Naples Federico II

Omar Chaallal, University of Quebec

Constantin E. Chalioris, Democritus University of Thrace

G. M. Chen, Guangdong University of Technology

Jian-Fei Chen, Queen’s University

Yizhuo Chen, Holtec International

Lijuan Cheng, University of California, Davis

Han Choi, McCormick Rankin

Nawawi Chouw, University of Auckland

Antoni Cladera, University of the Balearic Islands

Pierluigi Colombi, Politecnico di Milano

Carlos Coronado, Pennsylvania State University

Marco Corradi, Universita degli Studi di Perugia

Joao R. Correia, University of Lisbon

A. Crocombe, University of Surrey

Carlos Cruz Noguez, University of Alberta

Jian-Guo Dai, Hong Kong Polytechnic University

Antony Darby, University of Bath

Lucas da Silva, Universidade do Porto

Julio F. Davalos, City College of New York

Bill Davids, University of Maine

Mina Dawood, University of Houston

Julia de Castro, École Polytechnique Fédérale de Lausanne

Ahmed Farouk Deifalla, British University in Egypt (BUE)

Laura De Lorenzis, Technische Universität Braunschweig

Nicholas A. Dembsey, Worcester Polytechnic Institute

Marco Di Ludovico, University of Naples Federico II

Samir Dirar, University of Birmingham

Ted D. Donchev, Kingston University, London

Christopher Eamon, Wayne State University

Rami Eid, Shamoon College of Engineering

Mohamed A. ElGawady, Missouri University of Science and Technology

Tamer A. El-Maaddawy, United Arab Emirates University

Amr El-Ragaby, University of Windsor

Ahmed El Refai, Laval University

Ehab El-Salakawy, University of Manitoba

Ahmed K. El-Sayed, King Saud University

Murat Engindeniz, Simpson Gumpertz & Heger Inc.

Mohamed Fathy Mohamed Fahmy, Assiut University

Amir Fam, Queen’s University

Michail Fardis, University of Patras

Ahmed Sabry Farghaly, University of Sherbrooke

Sabrina Fawzia, Queensland University of Technology

Peng Feng, Tsinghua University

Jaime Fernandez-Gomez, Polytechnic University of Madrid

Dilum Fernando, University of Queensland

Emmanuel Ferrier, University Claude Bernard, Lyon I

Jon Fischer, Hughes Brothers

Francesco Focacci, e-Campus University

Paolo Foraboschi, Instituto Universitario di Architettura

Mariaenrica Frigione, University of Salento

Khaled Galal, Concordia University

Nestore Galati, Structural Group Inc.

Wan-Yang Gao, Hong Kong Polytechnic University

Russell Gentry, Georgia Institute of Technology

Bahman Ghiassi, ISISE, University of Minho

James W. Giancaspro, University of Miami

Nabil Grace, Lawrence Technological University

Ernesto Grande, University of Study of Cassino and Southern Lazio

Rebecca Jane Gravina, RMIT University

Maurizio Guadagnini, University of Sheffield

Garfield X. Guan, University of Cambridge

M. N. S. Hadi, University of Wollongong

Ehab Hamed, University of New South Wales

H. (Trey) R. Hamilton III, University of Florida

Mohamad H. Harajli, American University of Beirut

Issam E. Harik, University of Kentucky

Tarek Hassan, Dar Al Handasah Consultants

Michael Hayes, Engineering Systems Inc.

Xiongjun He, Wuhan University of Technology

Zheng He, Dalian University of Technology

Patrick Heffernan, Royal Military College of Canada

Mark P. Henderson, LJB Engineers-Architects

Chris Higgins, Oregon State University

Mahesh Hosur, Tuskegee University

Neil Anthony Hoult, Queen’s University

Mohamed Hwash, Stuttgart University

Tim Ibell, University of Bath

Alper Ilki, Istanbul Technical University

Maura Imbimbo, University of Cassino

Mohsen Issa, University of Illinois at Chicago

Hany Jawaheri Zadeh, University of Miami

Junhui Jia, Engineering Group Associates, P.C.

James Jirsa, University of Texas at Austin

Gintaris Kaklauskas, Vilnius Gediminas Technical University

Jae Yoon Kang, Korea Institute of Construction Technology

Athanasios I. Karabinis, Democritus University of Thrace (DUTh)

Chris Karayannis, Democritus University of Thrace (DUTh)

Thomas Keller, Swiss Federal Institute of Technology Lausanne EPFL

Seo Jin Kim, Wagners CFT

Young Hoon Kim, University of Louisville

Norimitsu Kishi, Muroran Institute of Technology

Ryan Koch, Hughes Brothers

Renata Kotynia, Technical University of Lodz

Slamah Salem Krem, University of Waterloo

Anthony Lamanna, Lamanna Engineering Consultants

Lidia La Mendola, Università degli Studi di Palermo

Jesus Larralde, Cal State Fresno

Ferdinando Laudiero, University of Ferrara

Chadon Lee, Chung-Ang University

Jung-Yoon Lee, Sungkyunkwan University

Luke Lee, University of the Pacific

Michael W. Lee, Wiss, Janney, Elstner Associates, Inc.

Christopher K. Y. Leung, Hong Kong University of Science and Technology

Bing Li, Nanyang Technological University

Fei Li, Logistical Engineering University

Lijuan Li, Guangdong University of Technology

Ruifeng Liang, West Virginia University

Kin Liao, Khalifa University of Science and Technology

Gian Piero Lignola, University of Naples Federico II

Wei-Qing Liu, Nanjing Tech University

Yuqing Liu, Tongji University

Sergio M. R. Lopes, University of Coimbra

Maria M. Lopez, Penn State University

Giovanni Loreto, Georgia Tech

Paulo B. Lourenco, University of Minho

Zhongguo John Ma, University of Tennessee Knoxville

Colin MacDougall, Queen’s University

Seyed Saeed Mahini, University of New England

Allan Manalo, University of Southern Queensland

John Mander, Texas A&M University

Gaetano Manfredi, Universita di Napoli Federico II

George C. Manos, Laboratory of Strength of Materials and Structures

Antonio Mari, Universitat Politecnica de Catalunya

Severino Pereira Cavalcanti Marques, Universidade Federal de Alagoas

Enzo Martinelli, Università degli Studi di Salerno

Radhouane Masmoudi, University of Sherbrooke

Fabio Matta, University of South Carolina

Claudio Mazzotti, Universitá di Bologna

Francesco Micelli, University of Lecce

Gabriele Milani, Politecnico di Milano

Fabio Minghini, University of Ferrara

Amir Mirmiran, Florida International University

Claudio Modena, University of Padova

Amir Mofidi, McGill University

Hamdy Mohamed, Sherbrooke University

M. S. Mohamed Ali, Adelaide University

Davood Mostofinejad, Isfahan University of Technology

Masoud Motavalli, EMPA Dubendorf

James Toby Mottram, University of Warwick

Abhijit Mukherjee, Curtin University

Phalguni Mukhopadhyaya, National Research Council, Canada

Clay Naito, Lehigh University

Antonio Nanni, University of Miami

Kenneth W. Neale, Universite De Sherbrooke

Ovidiu Nemes, Technical University of Cluj-Napoca

Martin Noel, Queen’s University

Deric John Oehlers, University of Adelaide

Ayman M. Okeil, Louisiana State University

Daniel V. Oliveira, University of Minho

Renato S. Olivito, University of Calabria

Luciano Ombres, Universita della Calabria Campus di Arcavacata

Sarah Orton, University of Missouri Columbia

Carlos E. Ospina, BergerABAM Inc.

Togay Ozbakkaloglu, University of Adelaide

Jinlong Pan, Southeast University

S. J. Pantazopoulou, Democritus University of Thrace

Chris Pantelis Pantelides, University of Utah

Catherine G. Papanicolaou, University of Patras

Azadeh Parvin, University of Toledo

Anil Patnaik, University of Akron

Patrick Paultre, University of Sherbrooke

Marisa Pecce, Universita degli Studi del Sannio

Carlo Pellegrino, Universita degli Studi di Padova

R. Perera, Technical University of Madrid

Shobeir Pirayeh Gar, Houston Offshore Engineering

Marco Andrea Pisani, Politecnico di Milano

Andrea Prota, University of Naples Federico II

Dolores Gomez Pulido, Eduardo Torroja Institute

Yazan Qasrawi, Royal Military College of Canada

Tong Qiu, Penn State University

Jawed Qureshi, University of East London

Oded Rabinovitch, Technion—Israel Institute of Technology

Khaldoun Rahal, Kuwait University

Raizal Rashid, Universiti Putra Malaysia

Indrajit Ray, West Virginia University

Roberto Realfonzo, University of Salerno

Mathieu Robert, University of Sherbrooke

Marc Robinson, South Dakota School of Mines and Technology

Owen Rosenboom, Wiss, Janney, Elstner Associates, Inc.

Theodoros Rousakis, Democritus University of Thrace

Marián Rovnak, Technical University of Košice

Ahmad Rteil, University of British Columbia

Elio Sacco, Universita di Cassino e del Lazio Meridionale

Pedram Sadeghian, Pennsylvania State University, Harrisburg

Hernan Santa Maria, Pontificia Universidad Catolica de Chile

Jacob Wittrup Schmidt, Technical University of Denmark

David W. Scott, Georgia Institute of Technology

Hatem Seliem, Helwan University

Rajan Sen, University of South Florida

Rudolf Seracino, North Carolina State University

Venkatesh Seshappa, Thermomass

Yutian Shao, Askew Hargraves Harcourt & Associates, Inc.

Edward Sherwood, Carleton University

Yilei Shi, AMT Engineering

Carol Shield, University of Minnesota

Rijun Shrestha, University of Technology Sydney

Nadeem Ahsan Siddiqui, King Saud University

Scott T. Smith, Southern Cross University

Lesley H. Sneed, Missouri University of Science and Technology

Saverio Spadea, University of Salerno

Mahmoud Reda Taha, University of New Mexico

Michael Tait, McMaster University

Kiang Hwee Tan, National University of Singapore

H. Murat Tanarslan, Dokuz Eylul University

Zhong Tao, University of Western Sydney

Jin-Guang Teng, Hong Kong Polytechnic University

Ralejs Tepfers, Ralejs Tepfers Consulting

Ganesh Thiagarajan, University of Missouri Kansas City

Minh Tan Ton That, Industrial Materials Institute

Timothy H. Topper, University of Waterloo

Houssam A. Toutanji, University of Alabama in Huntsville

Tung M. Tran, University of Wollongong

Thanasis C. Triantafillou, University of Patras

Nerio Tullini, University of Ferrara

G. J. Turvey, Lancaster University

Tamon Ueda, Hokkaido University

Maria Rosa Valluzzi, University of Padova

P. V. Vijay, West Virginia University

E. Vintzileou, National Technical University of Athens

Phillip Visintin, University of Adelaide

Jialai Wang, University of Alabama

Wenwei Wang, Southeast University

Xin Wang, Southeast University

Xin-Ling Wang, Zhengzhou University

Yuan Feng Wang, Beijing Jiaotong University

Zhenyu Wang, Harbin Institute of Technology

Andre Weber, Schoeck Bauteile GmbH

Yang Wei, Nanjing Forestry University

Sarah E. Witt, Contech Services, Inc.

Bo Wu, South China University of Technology

Gang Wu, Southeast University, Nanjing, China

Yufei Wu, City University of Hong Kong

Zhimin Wu, Dalian University of Technology

Zhishen Wu, Southeast University

Guijun Xian, Harbin Institute of Technology

Yan Xiao, Hunan University, University of Southern California

G. J. Xiong, Shantou University

Zihan Yan, California Department of Transportation

Soon-Jong Yoon, Hongik University

Joseph Robert Yost, Villanova University

Maged Youssef, University of Western Ontario

Tao Yu, University of Wollongong

Hong Yuan, Jinan University

Behrouz Zafari, University of Warwick

Wael Zatar, Marshall University

Burong Zhang, Jacobs Canada Inc.

Dawei Zhang, Zhejiang University

Shishun Zhang, University of Wollongong

Yuxi Zhao, Zhejiang University

Chaoyang Zhou, Central South University

Alberto Zinno, University of Naples Federico II

Pedram Zohrevand, Florida International University

Abdul-Hamid Zureick, Georgia Institute of Technology