FRP-Confined Concrete Composite Retrofit System for Structural Steel Columns
Publication: Journal of Composites for Construction
Volume 19, Issue 5
Abstract
Fiber-reinforced polymer (FRP)–confined concrete-steel composite columns have been recently introduced as a retrofit technique for structural steel columns. This technique involves placing a two-part FRP tube around an existing steel column and subsequently filling the void between the steel section and the FRP tube with concrete to create a composite column. The composite action occurs due to the concrete encasing the steel section and the FRP confining the concrete. Within this focus, an experimental investigation has been undertaken with the objectives of evaluating the effect of adding confined concrete to encase a steel W section, the effect of using a split-tube system as a practical encasement technique, and the effect of adding shrinkage-reducing admixtures (SRA) to the confined concrete. A total of 18 stub columns comprising six different column types were tested to achieve these objectives. The test results showed that the load-displacement response of the composite columns was similar to that of confined concrete combined with the elastic–perfectly plastic steel contribution. The experimental findings also demonstrated the enhanced composite column performance, including a significant increase in the ultimate capacity using the proposed split-tube retrofit technique. The results also indicated that the use of a SRA in confined concrete has an indistinguishable effect on the confined concrete strength.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Financial support was provided by the McMaster University Centre for Effective Design of Structures (CEDS) funded through the Ontario Research and Development Challenge Fund (ORDCF), a program of the Ontario Ministry of Research & Innovation (MRI), and the Natural Sciences and Engineering Research Council (NSERC) of Canada.
References
BASF Construction Chemicals. (2008). TETRAGUARD AS20 product data sheet, Cleveland.
Canadian Institute of Steel Construction. (2008). Handbook of steel construction, 9th Ed., Lakeside Group, Willowdale, ON, Canada.
El Chabib, H., Nehdi, M., and El Nagar, M. (2005). “Behavior of SCC confined in short GFRP tubes.” Cem. Concr. Compos., 27(1), 55–64.
Federal Highway Administrative Bridge Programs National Bridge Inventory. (2012). “FHWA bridge programs NBI data.” 〈http://www.fhwa.dot.gov/bridge/britab.cfm〉 (Feb. 5, 2012).
Ford Motor Company. (1982). “Energy absorption in composite tubes.” J. Compos. Mater., 16(6), 521–545.
Fyfe Co. LLC. (2010a). Tyfo SCH-41S composite using Tyfo S epoxy, San Diego.
Fyfe Co. LLC. (2010b). Tyfo SEH-51A composite using Tyfo S epoxy, San Diego.
Harries, K., and Carey, S. (2003). “Shape and ‘gap’ effects on the behavior of variably confined concrete.” Cem. Concr. Res., 33(6), 881–890.
International Institute for FRP in Construction. (1998). “Newsletters: Vol. 6. Issue 1.” 〈http://www.iifc-hq.org/news/〉 (Jul. 17, 2012).
Karimi, K., Tait, M., and El-Dakhakhni, W. (2010). “Experimental investigation of two FRP retrofit schemes for strengthening steel columns.” Proc., 9th U.S. Nationaland 10th Canadian Conf. on Earthquake Engineering, Toronto, ON, Canada.
Karimi, K., Tait, M., and El-Dakhakhni, W. (2011). “Testing and modeling of a novel FRP-encased steel-concrete composite column.” J. Compos. Struct., 93(5), 1463–1473.
Karimi, K., Tait, M., and El-Dakhakhni, W. (2012). “Influence of slenderness on the behavior of a FRP-encased steel-concrete composite column.” J. Compos. Constr., 100–109.
Lam, L., and Teng, J. (2003). “Design-oriented stress-strain model for FRP-confined concrete.” Constr. Build. Mater., 17(6), 471–489.
Lam, L., and Teng, J. (2004). “Ultimate condition of fiber reinforced polymer-confined concrete.” J. Compos. Constr., 539–548.
Lee, S. (2012). “Current state of bridge deterioration in the U.S.—Part 1.” Mater. Perform., 51(1), 62–67.
Liu, X., Nanni, A., and Silva, P. (2005). “Rehabilitation of compressive steel members using FRP pipes filled with non-expansive and expansive light-weight concrete.” Adv. Struct. Eng., 8(2), 129–142.
Xiao, Y., and Ma, R. (1997). “Seismic retrofit of RC circular columns using prefabricated composite jacketing.” J. Struct. Eng., 1357–1364.
Xiao, Y., Wu, H., and Martin, G. R. (1999). “Prefabricated composite jacketing of RC columns for enhanced shear strength.” J. Struct. Eng., 255–264.
Yang, H., Lam, D., and Gardner, L. (2008). “Testing and analysis of concrete-filled elliptical hollow section.” J. Eng. Struct., 30(12), 3771–3781.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jul 11, 2014
Accepted: Oct 27, 2014
Published online: Dec 31, 2014
Discussion open until: May 31, 2015
Published in print: Oct 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.