Strength and Axial Behavior of Circular Concrete Columns Reinforced with CFRP Bars and Spirals
Publication: Journal of Composites for Construction
Volume 18, Issue 2
Abstract
The behavior of concrete members reinforced with fiber-reinforced polymer (FRP) bars has been the focus of many studies in recent years. However, limited research work has been conducted to examine the axial behavior of concrete columns reinforced with FRP bars. In this paper, the behavior and compression strength of 11 full-scale circular concrete columns reinforced with carbon fiber–reinforced polymer (CFRP) bars and spirals were investigated. The test variables included reinforcement type (CFRP versus steel); longitudinal CFRP reinforcement ratio; and the volumetric ratio, size, and spacing of CFRP spirals. The test results indicated that the CFRP and steel reinforced concrete (RC) columns behaved in a similar manner up to their peak loads. The CFRP bars were effective in resisting compression until after crushing of concrete, and contributed on average 12% of column capacity. The design equation is modified to accurately predict the ultimate load capacities of CFRP RC columns. A new factor () is introduced in the modified equation to account for the FRP bars’ compressive strength properties as a function in their ultimate tensile strength.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to express their special thanks and gratitude to the Natural Science and Engineering Research Council of Canada (NSERC) and the Fonds quebecois de la recherche sur la nature et les technologies (FQRNT) for their financial support; Pultrall Inc. (Thetford Mines, Quebec) for their donation of the FRP materials; and the technical staff of the structural lab of the Department of Civil Engineering at the University of Sherbrooke.
References
Alsayed, S. H., Al-Salloum, Y. A., Almusallam, T. H., and Amjad, M. A. (1999). “Concrete columns reinforced by GFRP rods.” 4th Int. Symp. on Fiber-Reinforced Polymer Reinforcement for Reinforced Concrete Structures SP-188, C. W. Dolan, S. H. Rizkalla and A. Nanni, eds., American Concrete Institute, Farmington Hills, MI, 103–112.
American Concrete Institute (ACI). (2004). “Guide test methods for fiber-reinforced polymers (FRPs) for reinforcing or strengthening concrete structures.”, Detroit.
American Concrete Institute (ACI). (2006). “Guide for the design and construction of concrete reinforced with FRP bars.”, Detroit.
American Concrete Institute (ACI). (2011). “Building code requirements for structural concrete (ACI 318-11) and commentary.”, Detroit.
Benmokrane, B., El-Salakawy, E., El-Ragaby, A., and El-Gamal, S. (2007). “Performance evaluation of innovative concrete bridge deck slabs reinforced with fibre-reinforced polymer bars.” Can. J. Civ. Eng., 34(3), 298–310.
Benmokrane, B., El-Salakawy, E., El-Ragaby, A., and Lackey, T. (2006). “Designing and testing of concrete bridge decks reinforced with glass FRP bars.” J. Bridge Eng., 11(2), 217–229.
Canadian Standards Association (CSA). (2006). “Canadian highway bridge design code—(Section 16).”, Rexdale, Ontario, Canada.
Canadian Standards Association (CSA). (2012). “Design and construction of building components with fiber reinforced polymers.”, Rexdale, Ontario, Canada.
Canadian Standards Association (CSA), Technical Committee on Reinforced Concrete Design. (2004). “Design of concrete structures.”, Rexdale, Ontario, Canada.
Chaallal, O., and Benmokrane, B. (1993). “Physical and mechanical performance of an innovative glass-fibre-reinforced plastic rod.” Can. J. Civ. Eng., 20(2), 254–268.
Choo, C. C., Harik, I. E., and Gesund, H. (2006). “Strength of rectangular concrete columns reinforced with fiber-reinforced polymer bars.” ACI Struct. J., 103(3), 452–459.
Cusson, D., and Paultre, P. (1994). “High-strength concrete columns confined by rectangular ties.” J. Struct. Eng., 783–804.
Deitz, D. H., Harik, I. E., and Gesund, H. (2003). “Physical properties of glass fiber reinforced polymer rebars in compression.” J. Compos. Constr., 363–366.
De Luca, A., Matta, F., and Nanni, A. (2010). “Behavior of full-scale glass fiber-reinforced polymer reinforced concrete columns under axial load.” ACI Struct. J., 107(5), 589–596.
El-Salakawy, E., Benmokrane, B., and Desgagné, G. (2003). “FRP composite bars for the concrete deck slab of Wotton Bridge.” Can. J. Civ. Eng., 30(5), 861–870.
ISIS Canada. (2009). “Intelligent sensing for innovative structures.” 〈http://www.isiscanada.com〉 (Apr. 22, 2013).
Kobayashi, K., and Fujisaki, T. (1995). “Compressive behavior of FRP reinforcement in non-prestressed concrete members.” Proc. 2nd Int. RILEM Symp. on Non-Metallic (FRP) Reinforcement for Concrete Structures, E & FN Spon, London, 267–274.
Lotfy, E. M. (2010). “Behavior of reinforced concrete short columns with fiber reinforced polymers bars.” Int. J. Civ. Struct. Eng., 1(3), 545–557.
Lyse, I., and Kreidler, C. L. (1932). “Fourth progress report on column tests at Lehigh University.” ACI J., 28, 317–346.
Mallick, P. K. (1988). Fiber reinforced composites, materials, manufacturing, and design, Marcell Dekker, Inc., New York.
Mirmiran, A., and Shahawy, M. (1997). “Dilation characteristics of confined concrete.” J. Mech. Cohesive-Frictional Mater., 2(3), 237–249.
Ozbakkaloglu, T., and Saatcioglu, M. (2004). “Rectangular stress block for high-strength concrete.” ACI Struct. J., 101(4), 475–483.
Paramanantham, N. S. (1993). “Investigation of the behavior of concrete columns reinforced with fiber-reinforced plastic re-bars.” M.S. thesis, Lamar Univ., Beaumont, TX.
Pessiki, S., and Pieroni, A. (1997). “Axial load behavior of large-scale spirally-reinforced high-strength concrete columns.” ACI Struct. J., 94(3), 304–313.
Pultrall Inc. (2012). Composite reinforcing rods technical data sheet, Thetford Mines, Canada.
Rizkalla, S., Hassan, T., and Hassan, N. (2003). “Design recommendations for the use of FRP for reinforcement and strengthening of concrete structures.” J. Progress in Struct. Eng. Mater., 5(1), 16–28.
Sharbatdar, M. K. (2003). “Concrete columns and beams reinforced with FRP bars and grids under monotonic and reversed cyclic loading.” Ph.D. thesis, Univ. of Ottawa, Ottawa, Canada.
Sharma, U. K., Bhargava, P., and Kaushik, S. K. (2005). “Behavior of confined high strength concrete columns under axial compression.” J. Adv. Concr. Tech., 3(2), 267–281.
Sheikh, S. A., and Toklcuc, M. T. (1993). “Reinforced concrete columns confined by circular spirals and hoops.” ACI Struct. J., 90(5), 542–553.
Tobbi, H., Farghaly, A. S., and Benmokrane, B. (2012). “Concrete columns reinforced longitudinally and transversally with glass fiber-reinforced polymers bars.” ACI Struct. J., 109(4), 1–8.
Tobbi, H., Farghaly, A. S., and Benmokrane, B. (2013). “Behavior of concentrically loaded FRP-RC columns with varying reinforcement types and ratios.” ACI Struct. J., in press.
Wu, W. P. (1990). “Thermomechanical Properties of Fiber Reinforced Plastic (FRP) Bars.” PhD dissertation, West Virginia Univ., Morgantown, WV, 292.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: May 9, 2013
Accepted: Aug 1, 2013
Published online: Oct 28, 2013
Discussion open until: Mar 28, 2014
Published in print: Apr 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.