Axial and Flexural Performance of Square RC Columns Wrapped with CFRP under Eccentric Loading
Publication: Journal of Composites for Construction
Volume 16, Issue 6
Abstract
The majority of studies on fiber-reinforced-polymer (FRP) strengthened concrete columns deal with columns of a circular cross section. However, most concrete columns in the field have square or rectangular cross sections and resist eccentric loads. This paper presents the results of an experimental study on the performance of carbon-fiber-reinforced-polymer (CFRP) wrapped square reinforced concrete (RC) columns under eccentric loading. The influence of the number of CFRP layers, the magnitude of eccentricity, and the presence of vertical CFRP straps were investigated by testing 16 specimens. The specimens had the dimensions and round corners with a radius of 34 mm. Twelve specimens were tested as columns and four specimens as beams. The results of this study showed that CFRP wrapping enhanced the load-carrying capacity and ductility of the columns under eccentric loading. Furthermore, the application of the vertical CFRP straps significantly improved the performance of the columns with large eccentricity.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Concrete Institute (ACI). (2008). “Building code requirements for structural concrete and commentary.”, Farmington Hills, MI.
ASTM. (2008). “Standard test method for tensile properties of polymer matrix composite materials.”, Philadelphia.
Bisby, L., and Ranger, M. (2010). “Axial-flexural interaction in circular FRP-confined reinforced concrete columns.” Constr. Build. Mater., 24(9), 1672–1681.
Chaallal, O., and Shahawy, M. (2000). “Performance of fiber-reinforced polymer-wrapped reinforced concrete column under combined axial-flexural loading.” ACI Struct. J., 97(4), 659–668.
Eid, R., Roy, N., and Paultre, P. (2009). “Normal- and high-strength concrete circular elements wrapped with FRP composites.” J. Compos. Constr., 13(2), 113–124.
GangaRao, H. V. S., Taly, N., and Vijay, P. V. (2007). Reinforced concrete design with FRP composites, CRC, London.
Hadi, M. N. S. (2006a). “Behaviour of FRP wrapped normal strength concrete columns under eccentric loading.” Compos. Struct., 72(4), 503–511.
Hadi, M. N. S. (2006b). “Comparative study of eccentrically loaded FRP wrapped columns.” Compos. Struct., 74(2), 127–135.
Hadi, M. N. S. (2007a). “Behaviour of FRP strengthened concrete columns under eccentric compression loading.” Compos. Struct., 77(1), 92–96.
Hadi, M. N. S. (2007b). “The behaviour of FRP wrapped HSC columns under different eccentric loads.” Compos. Struct., 78(4), 560–566.
Kumutha, R., Yaidyanathan, R., and Palanichamy, M. S. (2007). “Behaviour of reinforced concrete rectangular columns strengthened using GFRP.” Cem. Concr. Compos., 29(8), 609–615.
Lam, L., and Teng, J. G. (2002). “Strength model for fiber-reinforced plastic-confined concrete.” J. Struct. Eng., 128(5), May, 612–623.
Li, J., and Hadi, M. N. S. (2003). “Behaviour of externally confined high strength concrete columns under eccentric loading.” Compos. Struct., 62(2), 145–153.
Maaddawy, T. E. (2009). “Strengthening of eccentrically loaded reinforced concrete columns with fiber-reinforced polymer wrapping system: Experimental investigation and analytical modeling.” J. Compos. Constr., 13(1), 13–24.
Mirmiran, A., Shahawy, M., Samaan, M., Echary, H. E., Mastrapa, J. C., and Pico, O. (1998). “Effect of column parameters on FRP-confined concrete.” J. Compos. Constr., 2(4), 175–185.
Parvin, A., and Wang, W. (2001). “Behavior of FRP jacketed concrete columns under eccentric loading.” J. Compos. Constr., 5(3), 146–152.
Richart, F. E., Brandtzaeg, A., and Brown, R. L. (1928). “A study of the failure of concrete under combined compressive stresses.”, Engineering Experimental Station, Univ. of Illinois at Urbana-Champaign, Urbana-Champaign, IL.
Rousakis, T. C., Karabinis, A. I., and Kiousis, P. D. (2007). “FRP-confined concrete members: Axial compression experiments and plasticity modeling.” Eng. Struct., 29(7), 1343–1353.
Standards Australia. (2009). “Concrete structures.”, Sydney, Australia.
Teng, J. G., Chen, J. F., Smith, S. T., and Lam, L. (2002). FRP-strengthened RC structures, Wiley, West Sussex, UK.
Teng, J. G., and Lam, L. (2004). “Behavior and modeling of fiber reinforced polymer-confined concrete.” J. Struct. Eng., 130(11), 1713–1723.
Wang, L. M., and Wu, Y. F. (2008). “Effect of corner radius on the performance of CFRP-confined square concrete columns: Test.” Eng. Struct., 30(2), 493–505.
Warner, R. F., Foster, S. J., and Kilpatrick, A. E. (2007). Reinforced concrete basics: Analysis and design of reinforced concrete structures, Pearson Education, Sydney, Australia.
Wu, Y. F., and Wang, L. M. (2009). “Unified strength model for square and circular concrete columns confined by external jacket.” J. Struct. Eng., 135(3), 253–261.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Nov 20, 2011
Accepted: Apr 24, 2012
Published online: Apr 26, 2012
Published in print: Dec 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.