Impact Behaviors of CFT and CFRP Confined CFT Stub Columns
Publication: Journal of Composites for Construction
Volume 16, Issue 6
Abstract
Concrete-filled steel tube (CFT) structures are widely used in various types of buildings and bridges. Confined concrete tube (CCFT) is a new type of structural column originally proposed in previous work. This paper reports the impact testing results of the CFT and carbon fiber reinforced polymer (CFRP) confined CFT stub columns under different impacting energy levels, conducted using a large-capacity drop-hammer machine. The time history curves of impacting force and deformation time history curves as well as failure patterns are investigated. The results indicate that the failure patterns are related to the impact energy. Increasing the thickness of the steel tube and providing additional transverse confinement by CFRP can enhance the impact-resistant behavior. Finally, the dynamic analysis software ANSYS/LS-DYNA is used to simulate the impact behaviors of the CFT and CCFT specimens, and the simulation results are reasonable compared with the test results.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research described in this paper was carried out at the Center of Integrated Protection Research of Engineering Structures (CIPRES) of the China Ministry of Education Key Laboratory of Building Safety and Energy Efficiency, under the support of the Department of Science of Hunan Province (10JJ2038) and the National Key Basic Research Program of China (973-2012CB026200). During the execution of the project, the previous work was partially supported by the University of Southern California.
References
Bischoff, P. H., and Perry, S. H. (1991). “Compressive behavior of concrete at high strain rates.” Mater. Struct., 24(6), 425–450.
Chen, Z. Y., and Pan, X. W. (1986). The performance of reinforced concrete structures subjected impact load, Qinghua University Press, Beijing (in Chinese).
Council on Tall Buildings and Urban Habitat. (1992). “7.3: Concrete filled steel tubes.” Cast-in place concrete in tall building design and construction, McGraw-Hill, New York, 202–222.
Fu, H. C., Erki, M. A., and Seckin, M. (1991). “Review of effects of loading rate on concrete in compression.” J. Struct. Eng., 117(12), 3645–3659.
Gong, J. C., and Malvern, L. E. (1990). “Passively confined tests of axial dynamic compressive strength of concrete.” Exp. Mech., 30(1), 55–59.
Holmquist, T. J., Johnson, G. R., and Cook, W. H. (1993). “A computational constitutive model for concrete subjected to large strains, high strain rates, and high pressures.” Intl Symp Ballistics, 14, 591–600.
Huo, J. S., Zheng, Q., Chen, B. S., and Xiao, Y. (2009). “Tests on impact behavior of micro-concrete-filled steel 3 tubes at elevated temperatures up to 400°C.” J. Mater. Struct., 42(10), 1325–1334.
Lahlou, K., Lachemi, M., and Aïtcin, P. C. (1999). “Confined high-strength concrete under dynamic compressive loading.” J. Struct. Eng., 125(10), 1100–1108.
Li, Z., Li, B. C., Li, Y. G., and Ren, G. P. (2006). “The research of the dynamic property of steel tube-confined concrete short column under axial impact (in Chinese).” J. Taiyuan Univ. Technol., 37(4), 383–385.
Lv, P. Y., Song, Y. P., and Hou, J. P. (2002). “Experimental study and failure criterion of compression concrete under various loading rates with uni-axial lateral confinement (in Chinese).” Gongcheng Lixue/Eng. Mech., 19(5), 67–71.
Prichard, S. J., and Perry, S. H. (2000). “The impact behavior of sleeved concrete cylinders.” Struct. Eng., 78(17), 23–27.
Rieder, K. A., and Mindess, S. (1998). “New test method to evaluate the impact behaviour of biaxially confined concrete.” Mater. Struct., 31(10), 669–675.
Ross, C. A., Tedesco, J. W., and Kuennen, S. T. (1995). “Effects of strain rate on concrete strength.” ACI Mater. J., 92(1), 37–47.
Ross, C. A., Thompson, P. Y., and Tedesco, J. W. (1989). “Split-Hopkinson pressure-bar tests on concrete and mortar in tension and compression.” ACI Mater. J., 86(5), 475–481.
Sakino, K., and Tomii, M. (1981). “Hysteretic behavior of concrete filed square steel tubular beam-columns failed in flexure.” Trans. Jpn. Concr. Inst., 3, 65–72.
Shan, J. H., Chen, R., Zhang, W. X., Xiao, Y., and Lu, F. Y. (2007). “Behavior of concrete filled tubes and confined concrete filled tubes under high speed impact.” Int. J. Adv. Struct. Eng., 10(2), 209–218.
Sukontasukkul, P., Mindess, S., and Banthia, N. (2005). “Properties of confined fibre-reinforced concrete under uniaxial compressive impact.” Cem. Concr. Res., 35(1), 11–18.
Symonds, P. S. (1967). Survey of methods of analysis for plastic deformation of structures under dynamic loading, Brown Univ., Providence, RI.
Tai, Y. S., and Tang, C. C. (2006). “Numerical simulation: The dynamic behavior of reinforced concrete plates under normal impact.” Theor. Appl. Fract. Mech., 45(2), 117–127.
Xiao, Y., He, W. H., and Choi, K. G. (2005). “Confined concrete filled tubular columns.” J. Struct. Eng., 131(3), 488–497.
Xiao, Y., Shan, J. H., Zheng, Q., Chen, B. S., and Shen, Y. L. (2009). “Experimental studies on concrete filled steel tubes under high-strain rate loading.” J. Mater. Civ. Eng., 21(10), 569–577.
Zhang, F. G., and Li, E. Z. (2001). “The method for determining the model parameters of impact damage of concrete.” J. Ballist., 13(4), 12–16.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Aug 11, 2011
Accepted: Apr 3, 2012
Published online: Apr 10, 2012
Published in print: Dec 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.