Environment-Assisted Subcritical Debonding of Epoxy-Concrete Interface
Publication: Journal of Composites for Construction
Volume 16, Issue 5
Abstract
Interface debonding can grow slowly within the FRP-to-concrete interface in aggressive environments, even though the energy release rate at the crack tip is only a fraction of the critical energy release rate of the interface. This slow debonding process is called environment-assisted subcritical debonding, which may be a dominant mechanism for the failure of the FRP-to-concrete interface under service loads in aggressive environments. In this study, environment-assisted subcritical debonding of the epoxy-concrete interface was first observed and characterized using wedge-driven testing. Aggressive environments have been found to substantially increase the debonding growth rate along the epoxy-concrete interface. Fracture surface analysis suggests that the debonding mode can change from the cohesive failure within the concrete in critical debonding to the adhesive failure along the epoxy-concrete interface in subcritical debonding. The proposed subcritical debonding testing closely simulates the failure occurring during the service life of the FRP-to-concrete interface, and allows interaction with environmental species during testing. Subcritical debonding testing provides a new approach to understand the degradation mechanism and to assess the long-term durability of the FRP-to-concrete interface.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was supported by the National Science Foundation CMMI-0927938. The authors are grateful to the program director, Dr. Yick Grace Hsuan, for her interest and support of this work.
References
Adams, R. D., Cowap, J. W., Farquharson, G., Margary, G. M., and Vaughn, D. (2009). “The relative merits of the boeing wedge test and the double cantilever beam test for assessing the durability of adhesively bonded joints, with particular reference to the use of fracture mechanics.” Int. J. Adhes. Adhes., 29(6), 609–620.
ASTM. (1998a). “Adhesive-bonded surface wedge durability of aluminium (wedge test).”, West Conshohocken, PA, 1–4.
ASTM. (1998b). “Standard practice for making and curing concrete test specimens in the laboratory.”, West Conshohocken, PA, 126–133.
ASTM. (2004). “Standard specifications for concrete aggregates.”, West Conshohocken, PA, 10–20.
Au, C., and O. Büyüköztürk, O. (2006). “Peel and shear fracture characterization of debonding in FRP plated concrete affected by moisture.” J. Comp. Constr., 10(1), 35–47.
Bizindavyi, L., Neale, K. M., and Erki, M. A. (2003). “Experimental investigation of bonded fiber reinforced polymer-concrete joints under cyclic loading.” J. Comp. Constr., 7(2), 127–134.
Dai, J. G., Kato, E., Iwanami, M., and Yokata, H. (2008). “Durability of carbon strand sheet to concrete bond interface under moisture condition.” Fourth Int. Conf. on FRP Composites in Civil Eingineering, International Institute for FRP in Construction (IIFC), Zurich, Switzerland.
Dauskardt, R. H., Lane, M., Ma, Q., and Krishna, N. (1998). “Adhesion and debonding of multi-layer thin film structures.” Eng. Fract. Mech., 61(1), 141–162.
Davalos, J. F., Kodkani, S. S., Ray, J., and Lin, C. (2008). “Fracture evaluation of GFRP—concrete interfaces for freeze—thaw and wet-dry cycling.” J. Compos. Mater., 42(14), 1439–1466.
Diab, H., and Wu, Z. S. (2007). “Nonlinear constitutive model for time-dependent behavior of FRP-concrete interface.” Compos. Sci. Technol., 67(11–12), 2323–2333.
Dillard, D. A., Pohlit, D. J., Jacob, G. C., Starbuck, J. M., and Kapania, R. K. (2011). “On the use of a driven wedge test to acquire dynamic fracture energies of bonded beam specimens.” J. Adhes., 87(4), 395–423.
Douglas, E., Hamilton III, H., Choi, S., and Stewart, A., (2011). “The role of chemical bonding on the durability of the epoxy-cement interface.” Proc., of 2011 NSF CMMI Engineering Research and Innovation Conference, National Science Foundation (NSF), Arlington, VA.
Grace, N. F., and Grace, M. (2005). “Effect of repeated loading and long term humidity exposure on flexural response of CFRP strengthened concrete beams.” Proc., Int. Symp. on Bonded Behavior of FRP in Structures (BBFS 2005), Chen, and Tengeds., Univ. of Edinburgh, U.K., 539–546.
Harries, K. A., Zorn, A., Aidoo, J., and Quattlebaum, J. (2006). “Deterioration of FRP-to-concrete bond under failure loading.” In: Bond behaviour of FRP in structures, Adv. Struct. Eng., 9(6), 779–789 (Special Issue).
Hughes Brothers, Inc. (2009). “Aslan 400 CFRP laminates.” 〈www.hughesbros.com〉, accessed on July 15th, 2012.
Karbhari, V. M., and Engineer, M., (1996). “Effect of environmental exposure on the external strengthening of concrete with composites—short term bond durability.” J. Reinf. Plast. Compos., 15(12), 1194–1216.
Karbhari, V. M. et al. (2003). “Durability gap analysis for fiber-reinforced polymer composites in civil infrastructure.” J. Compos. Constr., 7(3), 238–247.
Kinloch, A. J. (1979). “Interfacial fracture mechanical aspects of adhesive bonded joints—A review.” J. Adhes. Sci. Technol., 10(3), 193–219.
Kook, S. Y., and Dauskardt, R. H. (2002). “Moisture-assisted subcritical debonding of a polymer/metal interface.” J. Appl. Phys., 91(3), 1293–1303.
Lopez, M. M., and Krishnaswamy, R. (2006). “Time performance of concrete-CFRP bond under the effects of freeze-thaw cycles and sustained loading.” TRB 2006 Annual Meeting CD-ROM, Transportation Research Board, Washington, DC.
Mostovoy, S., and Ripling, E. J. (1969). “Influence of water on stress corrosion cracking of epoxy bonds.” J. Appl. Poly. Sci., 13, 1082–1111.
Namkanisorn, A., Ghatak, A., Chaudhury, M. K., and Berry, D. H. (2001). “A kinetic approach to study the hydrolytic stability of polymer-metal adhesion.” J. Adhes. Sci. Technol., 15(14), 1725–1745.
Ouyang, Z., and Wan, B. (2008). “Experimental and numerical study of moisture effects on the bond fracture energy of FRP/concrete joints.” J. Reinf. Plast. Compos., 27(2), 205–223.
Park, S. (2004). “Durability of adhesive joints between concrete and FRP reinforcement in aggressive environments.” Ph.D. dissertation, The Univ. of Texas at Austin, Austin, TX.
Porter, M. L., and Harries, K. A. (2007). “Future directions for research in FRP composites in concrete construction.” J. Compos. Constr., 11(3), 252–257.
Rakestraw, M. D., Taylor, M. W., and Dillard, D. A. (1995). “Time dependent crack growth and loading rate effects on interfacial and cohesive fracture of adhesive joints.” J. Adhes. Sci. Technol., 55(1–2), 123–149.
Ready, J. T., and Pantelides, C. P. (2006). “Long-term durability of State Street Bridge on Interstate 80.” J. Bridge Eng., 11(2), 205–216.
Ritter, J. E., and Conley, K. (1992). “Moisture-assisted crack propagation at polymer/glass interfaces.” Int. J. Adhes. Adhes., 12(4), 245–250.
Schneberger, G. L. (1983). Polymer structure and adhesive behavior, in adhesives in manufacturing, Schneberger, G. L.ed., Marcel Dekker, New York.
Shimizu, S., Yanagimoto, T., and Sakai, M. (1999). “Pyramidal indentation load-depth curve of viscoelastic materials.” J. Mater. Res., 14(10), 4075–4086.
Singh, H. K. et al. (2008). “Subcritical delamination in epoxy bonds to silicon and glass adherends: Effect of temperature and preconditioning.” J. Adhes., 84(7), 619–637.
Sun, C. T., and Zheng, S. (1996). “Delamination characteristics of double cantilever beam and end-notched flexure composites specimens.” Compos. Sci. Technol., 56(4), 451–459.
Technical Committee FRP. (2003). FRP-concrete bond in structural strengthening and rehabilitation, RILEM, Bagneux, France.
Teng, J. G., Smith, S. T., Yao, J., and Chen, J. F. (2003). “Intermediate crack-induced debonding in RC beams and slabs.” Constr. and Build. Mater., 17(6–7), 447–462.
Tsui, T. Y., McKerrow, A. J., and Vlassak, J. J. (2006). “The effect of water diffusion on adhesion of organosilicate glass film stacks.” J. Mech. Phys. Solids, 54(5), 887–903.
Wan, B., Petrou, M. F., and Harris, K. A. (2006). “The effect of the presence of water on the durability of bond between CFRP and concrete.” J. Reinf. Plast. Compos., 25(8), 875–890.
Wang, J., and Zhang, C. (2008). “Nonlinear fracture mechanics of flexural-shear crack induced debonding of FRP strengthened concrete beams.” Int. J. Solids Struct., 45(10), 2916–2936.
Wiederhorn, S. M. (1968). “Moisture assisted crack growth in ceramics.” Int. J. Fract., 4(2), 171–177.
Zhang, C. (2011). “Mechanics and subcritical cracking of FRP-concrete interface.” Ph.D. dissertation, Dept. of Civil, Construction, and Environmental Engineering, The Univ. of Alabama, Tuscaloosa, AL.
Information & Authors
Information
Published In
Journal of Composites for Construction
Volume 16 • Issue 5 • October 2012
Pages: 563 - 571
Copyright
© 2012 American Society of Civil Engineers.
History
Received: May 30, 2011
Accepted: Mar 2, 2012
Published online: Mar 5, 2012
Published in print: Oct 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.