Influences of Material Properties on Energy Absorption of Composite Sandwich Panels under Blast Loads
Publication: Journal of Composites for Construction
Volume 16, Issue 4
Abstract
This paper presents a study on the influence of material properties on the energy absorption capabilities of composite sandwich panels. This is of interest as increased energy absorption capability is an effective approach to providing blast resistance. The primary scope of work includes finite element parametric studies, carried out using LS-Dyna, of single-fiber-reinforced polymer (FRP) composite face sheets and FRP composite sandwich panels to determine the most influential material property parameters and suggest optimum values for these parameters in conceptual terms. The analyses also consider simultaneously varying the material properties throughout the panel and the influence of independently varying these properties among the different structural components of the panel. The results of this work can serve to design new or specify existing composite materials that have material properties optimized for increasing the blast resistance of composite sandwich panels in future work. Validation of the modeling techniques utilized and the development of quantified energy absorption metrics specific to blast applications are also discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work has been supported by the Department of Defense through the EPSCoR program.
References
Ambur, D. R., Jaunky, N., Lawson, R. E., and Knight, N. F. (2001). “Numerical simulations for high-energy impact of thin plates.” Int. J. Impact Eng.IJIED4, 25(7), 683–702.
Bahei-El-Din, Y. A., and Dvorak, G. J. (2008). “Enhancement of blast resistance of sandwich plates.” Composites, Part BCPBEFF, 39(1), 120–127.
Brodsky, E. (2008). “Blast protection of infrastructure using advanced composites.” Master’s thesis (DRAFT), University of Delaware, Newark, DE.
Carruthers, J. J., Kettle, A. P., and Robinson, A. M. (1998). “Energy absorption capability and crashworthiness of composite material structures: A review.” Appl. Mech. Rev.AMREAD, 51(10), 635–649.
Department of the Army. (1986). Fundamentals of protective design for conventional weapons, TM 5-855-1, Washington, DC.
Fleck, N. A., and Deshpande, V. S. (2004). “The resistance of clamped sandwich beams to shock loading.” J. Appl. Mech.JAMCAV, 71(3), 386–401.
Guruprasad, S., and Mukherjee, A. (2000a). “Layered sacrificial claddings under blast loading. Part I—Analytical studies.” Int. J. Impact Eng.IJIED4, 24(9), 957–973.
Guruprasad, S., and Mukherjee, A. (2000b). “Layered sacrificial claddings under blast loading. Part II—Experimental studies.” Int. J. Impact Eng.IJIED4, 24(9), 975–984.
Hanssen, A. G., Enstock, L., and Langseth, M. (2002). “Close-range blast loading of aluminium foam panels.” Int. J. Impact Eng.IJIED4, 27(6), 593–618.
Heimbs, S., Cichosz, J., Klaus, M., Kilchert, S., and Johnson, A. F. (2010). “Sandwich structures with textile-reinforced composite foldcores under impact loads.” Compos. Struct.COMSE2, 92(6), 1485–1497.
Jacob, G. C., Fellers, J. F., Simunovic, S., and Starbuck, J. M. (2002). “Energy absorption in polymer composites for automotive crashworthiness.” J. Compos. Mater.JCOMBI, 36(7), 813–850.
Jang, B. Z., Chen, L. C., Wang, C. Z., Lin, H. T., and Zee, R. H. (1989). “Impact resistance and energy absorption mechanisms in hybrid composites.” Compos. Sci. Technol.CSTCEH, 34(4), 305–335.
Kingery, C. N., and Bulmash, G. (1984). “Airblast parameters from TNT spherical air burst and hemispherical surface burst.” Technical Report ARBRL-TR-02555, US Army ARDC-BRL, Aberdeen Proving Ground, MD.
Kowsika, M. V. S. L. N., Mantena, P. R., and Balasubramaniam, K. (2002). “Energy absorption and dissipation characteristics of pultruded glass-graphite/expoxy hybrid composite beams.” J. Thermoplast. Compos. Mater.JTMAEQ, 15(3), 227–252.
Lee, D. K., and O’Toole, B. J. (2004). “Energy absorbing sandwich structures under blast loading.” 8th Int. LS-Dyna Users Conf., Livermore Software Technology Corporation, Livermore, CA.
Pilchak, A. L., Uchiyama, T., and Liu, D. (2006). “Low-velocity impact response of small-angle laminated composites.” AIAA J.AIAJAH, 44(12), 3080–3087.
Schweizerhof, K., Weimar, K., Munz, T., and Rottner, T. (1998). “Crashworthiness analysis with enhanced composite material models in LS-DYNA—Merits and limits.” 5th Int. LS-DYNA User’s Conf., Livermore Software Technology Corporation, Livermore, CA.
Scida, D., Aboura, Z., Benzeggagh, M. L., and Bocheren, E. (1999). “A micromechanics model for 3-D elasticity and failure of woven fibre composites.” Compos. Sci. Technol.CSTCEH, 59(4), 505–517.
Silcock, M. D., Hall, W., and Fox, B. L. (2006). “Finite element modeling of composite tubular crash structures with an explicit code.” Proc. of the 6th Annual SPE Automotive Composites Conf., Society of Plastics Engineers, Automotive Division, Troy, MI.
Su, H., and McConnell, J. (2009). “Optimum material properties of composite sandwich panels for energy absorption.” Proc. of the Society for Advancement of Materials and Processing Engineering (SAMPE) Conf., Society for the Advancement of Materials and Processing Engineering, Covina, CA.
Tekalur, S. A., Shivakumar, K., and Shukla, A. (2008). “Mechanical behavior and damage evolution in E-glass vinyl ester and carbon composites subjected to static and blast loads.” Composites, Part BCPBEFF, 39(1), 57–65.
Tierney, J. (2005). Composite materials analysis of plates CMAP, Center for Composite Materials, Newark, DE.
Torre, L., and Kenny, J. M. (2000). “Impact testing and simulation of composite sandwich structures for civil transportation.” Compos. Struct.COMSE2, 50(3), 257–267.
Vaidya, U. K., Pillay, S., Bartus, S., Ulven, C. A., Grow, D. T., and Mathew, B. (2006). “Impact and post-impact vibration response of protective metal foam composite sandwich plates.” Mater. Sci. Eng. AMSAPE3, 428(1–2), 59–66.
Villanueva, G. R., and Cantwell, W. J. (2004). “The high velocity impact response of composite and FML-reinforced sandwich structures.” Compos. Sci. Technol.CSTCEH, 64(1), 35–54.
Vinson, J. R., and Sierakowski, R. L. (1989). The behavior of structures composed of composite materials, Kluwer Academic Publishers, Dordrecht, The Netherlands.
Xiao, J. R., Gama, B. A., and Gillespie, J. W. Jr. (2007). “Progressive damage and delamination in plain weave S-2 glass/SC-15 composites under quasi-static punch-shear loading.” Compos. Struct.COMSE2, 78(2), 182–196.
Xue, Z., and Hutchinson, J. W. (2003). “Preliminary assessment of sandwich plates subject to blast loads.” Int. J. Mech. Sci.IMSCAW, 45(4), 687–705.
Zee, R. H., and Hsieh, C. Y. (1998). “Energy absorption processes in fibrous composites.” Mater. Sci. Eng. AMSAPE3, 246(1–2), 161–168.
Zhou, G., Hill, M., and Hookham, N. (2007). “Investigation of parameters governing the damage and energy absorption characteristics of honeycomb sandwich panels.” J. Sandwich Struct. Mater.JSSMFI, 9(4), 309–342.
Information & Authors
Information
Published In
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Jan 27, 2011
Accepted: Nov 17, 2011
Published online: Nov 19, 2011
Published in print: Aug 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.