Time-Dependent Reliability Analysis of FRP Rehabilitated Pipes
Publication: Journal of Composites for Construction
Volume 14, Issue 3
Abstract
The goal of this paper is to present work that demonstrates the application of probabilistic modeling to evaluate the long-term performance of fiber-reinforced polymer (FRP) rehabilitated piping components. The time-dependent reliability index is evaluated for a fully deteriorated piping component rehabilitated with FRP considering the demands of internal fluid pressure, external soil pressure, and traffic loading. Carbon FRP (CFRP) and glass FRP (GFRP) composites are compared and the influence of material deterioration, fiber volume fraction (FVF), and variation in thickness of the composite are assessed using a first order reliability method and compared to a steel pipe under similar loading. A CFRP rehabilitation scheme having a FVF greater than 40% would be needed to exceed the as-built reliability index of a steel pipe under time-dependent composite deterioration, while no practical GFRP FVF can achieve the performance of steel pipe in the presence of time-dependent composite deterioration. Variations in the coefficient of variation (COV) can adversely affect the safety of both FRP rehabilitation schemes where an increase in COV from 10 to 30% result in decreases in the reliability index by 39.4% for CFRP (40% FVF) and 39.7% for GFRP (40% FVF).
Get full access to this article
View all available purchase options and get full access to this article.
References
Abdalla, F. H., Megat, M. H., Sapaun, M. S., and Shahari, B. B. (2008). “Determination of volume fraction values of filament wound glass and carbon fiber-reinforced composites.” APRN J. Eng. Appl. Sci., 3(4), 7–11.
Ahammed, M., and Melchers, R. E. (1994). “Probabilistic analysis of underground pipelines subject to combined stresses and corrosion.” Eng. Struct., 19(12), 988–994.
ASCE. (2009). “Report card for America’s infrastructure.” ⟨http://www.asce.org/reportcard/2009/⟩ (Feb. 23, 2009).
ASTM. (2008). “Standard practice for rehabilitation of existing pipelines and conduits by pulled-in-place installation of cured-in-place thermosetting resin pipe (CIPP).” F1743-08, West Conshohocken, Pa.
ASTM. (2009). “Standard practice for rehabilitation of existing pipelines and conduits by the inversion and curing of a resin-impregnated tube.” F1216-09, West Conshohocken, Pa.
Astrom, B. T. (1997). Manufacturing of polymer composites, 1st Ed., Chapman & Hall, London.
Atadero, R., Lee, L., and Karbhari, V. M. (2005). “Consideration of material variability in reliability analysis of FRP strengthened bridge decks.” Compos. Struct., 70, 430–443.
Bethel, K., et al. (2006). “The design, development, and validation of an innovative high strength, self monitoring, composite pipe liner for the restoration of energy transmission pipelines.” Proc., 6th Int. Pipeline Conf..
Black, S. (2005). “Repair of infrastructure with composites: Composites prove their mettle in large, demanding repairs and rehab.” Compos. Technol.
Chin, W. S., and Lee, D. G. (2005). “Development of the trenchless rehabilitation process for underground pipes based on RTM.” Compos. Struct., 68, 267–283.
Duell, J. M., Wilson, J. M., and Kessler, M. R. (2008). “Analysis of carbon composite overwrap pipeline repair system.” Int. J. Pressure Vessels Piping, 85, 782–788.
Frangopol, D. M., Bruhwiler, E., Faber, M. H., and Adey, B. (2003). “Life-cycle performance of deteriorating structures: Assessment, design, and management.” ASCE, Reston, Va.
Hastak, M., Mirmiran, A., and Deepak, R. (2003). “A framework for life-cycle costs assessment of composites in construction.” J. Reinf. Plast. Compos., 22(15), 1409–1430.
Jaganathan, A., Allouche, E. and Baumert, M. (2007). “Experimental and numerical evaluation of the impact of folds on the pressure rating of CIPP liners.” Tunnel1ing and Underground Space Technology, 22(5–6), 666–678.
Karbhari, V. M., and Abanilla, A. (2007). “Design factors, reliability, and durability prediction of wet lay-up carbon/epoxy used in external strengthening.” Composites, Part B, 38, 10–23.
Karbhari, V. M., and Zhao, L. (2000). “Use of composites for 21st century civil infrastructure.” Comput. Methods Appl. Mech. Eng., 185, 433–454.
Kaw, A. K. (2006). “Mechanics of composite materials.” 2nd Ed., CRC, Boca Raton, Fla.
Law, T. C. M., and Moore, I. D. (2007). “Installed geometry of cast-in-place polymer sewer liners.” J. Perform. Constr. Facil., 21(2), 172–176.
Lee, D. G., Chin, W. S., Kwon, J. W., and Yoo, A. K. (2002). “Repair of underground buried pipes with resin transfer molding.” Compos. Struct., 57(1), 67–77.
Melchers, R. E. (1999). Structural reliability analysis and prediction, 2nd Ed., Wiley, New York.
Plevris, N., Triantafillou, T. C., and Veneziano, D. (1995). “Reliability of RC members strengthened with CFRP laminates.” J. Struct. Eng., 121(7), 1037–1044.
Sadiq, R., Rajani, B., and Kleiner, Y. (2004). “Probabilistic risk analysis of corrosion associated failures in cast iron water mains.” Reliab. Eng. Syst. Saf., 86(1), 1–10.
Tafuri, A. N., and Selvakumar, A. (2002). “Wastewater collection system infrastructure research needs in the USA.” Urban Water, 4(1), 21–29.
Toutanji, H., and Dempsey, S. (2001). “Stress modeling of pipelines strengthened with advanced composite materials.” Thin-Walled Struct., 39, 153–165.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Mar 5, 2009
Accepted: Sep 7, 2009
Published online: Feb 5, 2010
Published in print: Jun 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.