Hysteretic Behavior of Bolt Connections in Timber–Concrete Composite Bridges: Experimental and Numerical Research
Publication: Journal of Bridge Engineering
Volume 28, Issue 1
Abstract
The hysteretic behavior of bolt connections in a timber–concrete composite (TCC) bridge was investigated. Six identical TCC specimens were designed with bolted connections and subjected to reversed cyclic loading tests. The failure modes, energy dissipation capacity, stiffness degradation, strength degradation, and hysteretic responses of the specimens were evaluated. The experimental results indicate that the predominant failure mode was a dual-hinge mechanism in the bolts of the TCC specimens. The TCC specimens exhibited satisfactory energy dissipation and achieved a mean ductility factor of 6.76. A finite-element model was developed to simulate the cyclic response of the tested TCC specimens. The simulated data are in good agreement with the experimental data. The experimental and numerical results reported are useful for the development of design guidelines for TCC bridges with bolted connections.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research work was supported by State Forestry Administration Project 948 (Project No. 2014-4-51), the National Natural Science Foundation of China (Grant No. 51478485), the Natural Science Foundation of Hunan Province (Grant No. 2020JJ5618), the Scientific Research Project of Education Department of Hunan Province (Nos. 19C0169 and 19B054), and the Science Popularization Special Project on the Construction of Innovation-Oriented Provinces (No. 2021ZK4148), which are highly appreciated.
References
Blasetti, A. S., R. M. Hoffman, and D. W. Dinehart. 2008. “Simplified hysteretic finite-element model for wood and viscoelastic polymer connections for the dynamic analysis of shear walls.” J. Struct. Eng. 134 (1): 77–86. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:1(77).
BSI (British Standards Institution). 1991. Timber structures—Joints made with mechanical fasteners—General principles for the determination of strength and deformation characteristics. BS EN 26891. London: BSI.
BSI (British Standards Institution). 2004. Design of timber structures–Part 1-1: General–Common rules and rules for buildings. Eurocode 5. BS EN 1995-1-1:2004. London: BSI.
Cao, J., H. Xiong, and J. Chen. 2021. “Mechanical performance of timber–concrete bolted connections under cyclic loading.” Structures 34: 3464–3477. https://doi.org/10.1016/j.istruc.2021.09.086.
Clouston, P., L. A. Bathon, and A. Schreyer. 2005. “Shear and bending performance of a novel wood–concrete composite system.” J. Struct. Eng. 131 (9): 1404–1412. https://doi.org/10.1061/(ASCE)733-9445(2005)131:9(1404).
Dias, A. M. P. G., H. M. P. Cruz, S. M. R. Lopes, and J. W. Van de Kuilen. 2010. “Stiffness of dowel–type fasteners in timber–concrete joints.” Proc. Inst. Civ Eng. Struct. Build. 163 (4): 257–266. https://doi.org/10.1680/stbu.2010.163.4.257.
Dias, A. M. P. G., S. M. R. Lopes, J. W. G. Van de Kuilen, and H. M. P. Cruz. 2007. “Load-carrying capacity of timber–concrete joints with dowel-type fasteners.” J. Struct. Eng. 133 (5): 720–727. https://doi.org/10.1061/(ASCE)0733-9445 (2007) 133:5(720).
He, G., L. Xie, A. Wang, J. Yi, L. Peng, Z. Chen, P. J. Gustafsson, R. Crocetti. 2016. “Shear behavior study on timber–concrete composite structures with bolts.” BioResources 11 (4): 9205–9218. https://doi.org/10.15376/biores.11.4.9205-9218.
He, M., J. Luo, D. Tao, Z. Li, Y. Sun, and G. He. 2020. “Rotational behavior of bolted glulam beam–to–column connections with knee brace.” Eng. Struct. 207: 110251. https://doi.org/10.1016/j.engstruct.2020.110251.
ISO. 2003. Timber structures–Joints made with mechanical fasteners–Quasi-static reversed–cyclic test method. ISO 16670. Geneva: ISO.
Isoda, H., and S. Tesfamariam. 2016. “Connections for timber–concrete hybrid building: Experimental and numerical model results.” J. Perform. Constr. Facil 30 (5): 04016024. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000849.
MOC (Ministry of Construction). 2012. Technical code of glued laminated timber structures. [In Chinese.] GB/T 50708. Beijing: MOC.
MOHURD (Ministry of Housing and Urban–Rural Development). 2015. Specification for seismic test of buildings. JGJ/T 101-2015. Beijing: Architecture & Building Press.
Kawai, N., H. Isoda, M. Okabe, and S. Tesfamariam. 2016. “Monotonic and reverse-cyclic load experiment for plywood and RC slab diaphragms used in timber–concrete hybrid building.” Structures 7: 85–99. https://doi.org/10.1016/j.istruc.216.05.011.
Leijten, A. J. M., S. Ruxton, H. Prion, and F. Lam. 2006. “Reversed-cyclic behavior of a novel heavy timber tube connection.” J. Struct. Eng. 132 (8): 1314–1319. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:8(1314).
Li, W., W. Chen, Z. Zhou, N. Gao, and J. Chen. 2019. “Analysis of temporal–spatial distribution of life losses caused by earthquake hazards in Chinese mainland.” J. Catastrophol. 34 (1): 222–228. https://doi.org/10.3969/j.issn.1000-811X.2019.01.040.
Mascia, N. T., and J. Soriano. 2004. “Benefits of timber–concrete composite action in rural bridges.” Mater. Struct. 37 (2): 122–128. https://doi.org/10.1007/BF02486608.
Mekki, O. B., and F. Toutlemonde. 2011. “Experimental validation of a 10--m-span composite UHPFRC–carbon fibers–timber bridge concept.” J. Bridge Eng. 16 (1): 148–157. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000114.
Monteiro, S. R. S., A. M. P. G. Dias, and J. H. J. O. Negrão. 2013. “Assessment of timber–concrete connections made with glued notches: Test set-up and numerical modeling.” Exp. Tech. 37 (2): 50–65. https://doi.org/10.1111/j.1747-1567.2011.00804.x.
Rautenstrauch, K., J. Mueller, and A. Simon. 2010. “The first timber–concrete composite road bridge in Germany.” In Proc., 11th World Conf. on Timber Engineering. Trees and Timber Institute, National Research Council.
Rodrigues, J. N., A. M. P. G. Dias, and P. Providência. 2013. “Timber–concrete composite bridges: State-of-the-art review.” BioResources 8 (4): 6630–6649. https://doi.org/10.15376/biores.8.4.6630-6649.
Weaver, C. A., W. G. Davids, and H. J. Dagher. 2004. “Testing and analysis of partially composite fiber-reinforced polymer–glulam–concrete bridge girders.” J. Bridge. Eng. 9 (4): 316–325. https://doi.org/10.1061/(ASCE)1084-0702(2004)9:4 (316).
Xie, L., G. He, A. Wang, P. J. Gustafsson, R. Crocetti, L. Chen, L. Li, and W. Xie. 2017. “Shear capacity of stud–groove connector in glulam–concrete composite structure.” BioResources 12 (3): 4960–4706. https://doi.org/10.15376/biores.12.3.4960-4706.
Yeoh, D., M. Fragiacomo, M. de Franceschi, and K. H. Boon. 2011. “State of the art on timber–concrete composite structures: Literature review.” J. Struct. Eng. 137 (10): 1085–1095. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000353.
Zhu, W., H. Yang, W. Liu, B. Shi, Z. Ling, and H. Tao. 2019. “Experimental investigation on innovative connections for timber–concrete composite systems.” Constr. Build. Mater. 207: 345–356. https://doi.org/10.1016/j.conbuildmat.2019.02.079.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jul 20, 2021
Accepted: Aug 7, 2022
Published online: Oct 21, 2022
Published in print: Jan 1, 2023
Discussion open until: Mar 21, 2023
ASCE Technical Topics:
- Analysis (by type)
- Bolted connections
- Bridge engineering
- Bridges
- Bridges (by material)
- Building materials
- Chemical degradation
- Chemical processes
- Chemistry
- Composite bridges
- Connections (structural)
- Energy dissipation
- Engineering fundamentals
- Engineering materials (by type)
- Engineering mechanics
- Environmental engineering
- Load tests
- Materials engineering
- Numerical analysis
- Structural behavior
- Structural engineering
- Structural members
- Structural systems
- Tests (by type)
- Thermodynamics
- Wood and wood products
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.