Behavior and Analysis of Simply Supported Bridges under Vessel Side Collisions: Implications from Collapse of the Taiyangbu Bridge
Publication: Journal of Bridge Engineering
Volume 27, Issue 9
Abstract
On July 7, 2020, the Taiyangbu Bridge crossing the Changjiang River was hit by a barge loaded with sand, resulting in the collapse of the main span. Such side collisions are seldomly investigated in previous studies. To this end, high-fidelity physics-based finite-element (FE) models are developed in this study to reproduce the barge side collision accident of the Taiyangbu Bridge and scrutinize the causes of its collapse. The collapse process of the Taiyangbu Bridge obtained from the high-resolution FE simulations is consistent with that observed from the video data. The FE results indicate that the collapse of the Taiyangbu Bridge is attributed to the flexural failure of the pile foundation in the longitudinal bridge direction, which agrees with the field investigation. In addition, side collisions are demonstrated to be the most unfavorable scenario in comparison with head-on collisions and oblique collisions. Based on the vessel–bridge interaction analysis, a simplified model with two degrees of freedom (2-DOF) is proposed to efficiently predict the vessel-side-collision-induced responses. Compared with the force-based design method used in current design codes and the energy-based method, which may result in an unsafe and inadequate design, the proposed 2-DOF method is more suitable for the side collision analysis.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by the National Natural Science Foundation of China (Grant No. 51978258), the Key Research and Development Program of Hunan Province (Grant No. 2021SK2052), the Youth Science and Technology Innovation Talent Project of Hunan Province (Project Nos. 2020RC3018 and 2020RC3081), Hunan Traffic Science and Technology Project (Project No. 202027), and Changsha Natural Science Foundation (Grant No. kq2014052).
References
AASHTO. 2009. Guide specifications and commentary for vessel collision design of highway bridges. Washington, DC: AASHTO.
AASHTO. 2020. AASHTO LRFD bridge design specifications. 9th ed. Washington, DC: AASHTO.
Biggs, J. M. 1964. Introduction to structural dynamics. New York: McGraw-Hill.
CEN (European Committee for Standardization). 2006. Actions on structures. Part 1-7: General actions-accidental actions. EN 1991-1-7:2006, Eurocode 1. Brussels, Belgium: CEN.
Consolazio, G. R., R. A. Cook, M. C. McVay, D. Cowan, A. Biggs, and L. Bui. 2006. Barge impact testing of the St. George island causeway bridge. Gainesville, FL: Dept. of Civil and Coastal Engineering, Univ. of Florida.
Consolazio, G. R., and D. R. Cowan. 2005. “Numerically efficient dynamic analysis of barge collisions with bridge piers.” J. Struct. Eng. 131 (8): 1256–1266. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:8(1256).
Consolazio, G. R., D. J. Getter, and G. C. Kantrales. 2014. Validation and implementation of bridge design specifications for barge impact loading. Gainesville, FL: Dept. of Civil and Coastal Engineering, Univ. of Florida.
Consolazio, G. R., M. C. McVay, D. R. Cowan, M. T. Davidson, and D. J. Getter. 2008. Development of improved bridge design provisions for barge impact loading. Gainesville, FL: Engineering and Industrial Experiment Station, Univ. of Florida.
Cowan, D. R., G. R. Consolazio, and M. T. Davidson. 2015. “Response-spectrum analysis for barge impacts on bridge structures.” J. Bridge Eng. 20 (12): 04015017. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000772.
Davidson, M. T., G. R. Consolazio, D. J. Getter, and F. D. Shah. 2013. “Probability of collapse expression for bridges subject to barge collision.” J. Bridge Eng. 18 (4): 287–296. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000376.
Davidson, M., R. C. Patev, and G. R. Consolazio. 2020. “Probabilistic risk assessment of barge impacts on hurricane floodwalls.” J. Perform. Constr. Facil 34 (2): 04020010. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001412.
DNV (Det Norske Veritas). 2010. Design against accidental loads. Recommended Practice DNV-RP-C204. Bærum, Norway: DNV.
Fan, W., W. Guo, Y. Sun, B. Chen, and X. Shao. 2018a. “Experimental and numerical investigations of a novel steel-UHPFRC composite fender for bridge protection in vessel collisions.” Ocean Eng. 165: 1–21. https://doi.org/10.1016/j.oceaneng.2018.07.028.
Fan, W., Y. Liu, B. Liu, and W. Guo. 2016a. “Dynamic ship-impact load on bridge structures emphasizing shock spectrum approximation.” J. Bridge Eng. 21 (6): 04016057. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000929.
Fan, W., D. Shen, X. Huang, and Y. Sun. 2020. “Reinforced concrete bridge structures under barge impacts: FE modeling, dynamic behaviors, and UHPFRC-based strengthening.” Ocean Eng. 216: 108116. https://doi.org/10.1016/j.oceaneng.2020.108116.
Fan, W., D. Shen, T. Yang, and X. Shao. 2019. “Experimental and numerical study on low-velocity lateral impact behaviors of RC, UHPFRC and UHPFRC-strengthened columns.” Eng. Struct. 191: 509–525. https://doi.org/10.1016/j.engstruct.2019.04.086.
Fan, W., Y. Sun, W. Sun, X. Huang, and B. Liu. 2021. “Effects of corrosion and scouring on barge impact fragility of bridge structures considering nonlinear soil–pile interaction.” J. Bridge Eng. 26 (8): 04021058. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001757.
Fan, W., X. Xu, Z. Zhang, and X. Shao. 2018b. “Performance and sensitivity analysis of UHPFRC-strengthened bridge columns subjected to vehicle collisions.” Eng. Struct. 173: 251–268. https://doi.org/10.1016/j.engstruct.2018.06.113.
Fan, W., and W. C. Yuan. 2012. “Shock spectrum analysis method for dynamic demand of bridge structures subjected to barge collisions.” Comput. Struct. 90–91: 1–12. https://doi.org/10.1016/j.compstruc.2011.10.015.
Fan, W., and W. C. Yuan. 2014. “Numerical simulation and analytical modeling of pile-supported structures subjected to ship collisions including soil–structure interaction.” Ocean Eng. 91: 11–27. https://doi.org/10.1016/j.oceaneng.2014.08.011.
Fan, W., W. Yuan, Z. Yang, and Q. Fan. 2011. “Dynamic demand of bridge structure subjected to vessel impact using simplified interaction model.” J. Bridge Eng. 16 (1): 117–126. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000139.
Fan, W., Y. Y. Zhang, and B. Liu. 2016b. “Modal combination rule for shock spectrum analysis of bridge structures subjected to barge collisions.” J. Eng. Mech. 142 (2): 04015083. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001004.
Fujikake, K., B. Li, and S. Soeun. 2009. “Impact response of reinforced concrete beam and its analytical evaluation.” J. Struct. Eng. 135 (8): 938–950. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000039.
Getter, D. J., G. R. Consolazio, and M. T. Davidson. 2011. “Equivalent static analysis method for barge impact-resistant bridge design.” J. Bridge Eng. 16 (6): 718–727. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000224.
Gholipour, G., C. Zhang, and A. A. Mousavi. 2020. “Nonlinear numerical analysis and progressive damage assessment of a cable-stayed bridge pier subjected to ship collision.” Mar. struct. 69: 102662. https://doi.org/10.1016/j.marstruc.2019.102662.
Guo, J., and J.-x. He. 2020. “Dynamic response analysis of ship-bridge collisions experiment.” J. Zhejiang Univ. Sci. A 21 (7): 525–534. https://doi.org/10.1631/jzus.A1900382.
Jiang, H., J. Wang, M. G. Chorzepa, and J. Zhao. 2017. “Numerical investigation of progressive collapse of a multispan continuous bridge subjected to vessel collision.” J. Bridge Eng. 22 (5): 04017008. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001037.
Kameshwar, S., and J. E. Padgett. 2018. “Response and fragility assessment of bridge columns subjected to barge-bridge collision and scour.” Eng. Struct. 168: 308–319. https://doi.org/10.1016/j.engstruct.2018.04.082.
Kantrales, G. C., M. T. Davidson, and G. R. Consolazio. 2019. “Influence of impact-induced relative motion on effective barge flotilla mass.” J. Bridge Eng. 24 (4): 04019019. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001374.
LSTC (Livermore Software Technology Corporation). 2014. LS-DYNA keyword user’s manual. Livermore, CA: LSTC.
MTC (Ministry of Transport of China). 1989. General code for design of highway bridges and culverts. JTJ 021-89. Beijing: Ministry of Transport of China.
MTC (Ministry of Transport of China). 2004a. General code for design of highway bridges and culverts. JTG D60. Beijing: China Communications Press.
MTC (Ministry of Transport of China). 2004b. Code for design of highway reinforced concrete and prestressed concrete bridge and culverts. JTG D62. Beijing: China Communications Press.
MTC (Ministry of Transport of China). 2007. Code for design of ground base and foundation of highway bridges and culverts. JTG D63. Beijing: People’s Communications Press.
MTC (Ministry of Transport of China). 2020a. Specifications for seismic design of highway bridges. JTG/T-2231-01. Beijing: Ministry of Transport of China.
MTC (Ministry of Transport of China). 2020b. Specifications for collision design of highway bridges. JTG/T 3360-02. Beijing: Ministry of Transport of China.
Murray, Y. D., A. Y. Abu-Odeh, and R. P. Bligh. 2007. Evaluation of LS-DYNA concrete material model 159. Washington, DC: Federal Highway Administration.
Pedersen, P. T., J. Chen, and L. Zhu. 2020. “Design of bridges against ship collisions.” Mar. struct. 74: 102810. https://doi.org/10.1016/j.marstruc.2020.102810.
Priestley, M. N., F. Seible, and G. M. Calvi. 1996. Seismic design and retrofit of bridges. New York: Wiley.
Sha, Y., and H. Hao. 2012. “Nonlinear finite element analysis of barge collision with a single bridge pier.” Eng. Struct. 41: 63–76. https://doi.org/10.1016/j.engstruct.2012.03.026.
Sha, Y., and H. Hao. 2013. “Laboratory tests and numerical simulations of barge impact on circular reinforced concrete piers.” Eng. Struct. 46: 593–605. https://doi.org/10.1016/j.engstruct.2012.09.002.
Shen, D. 2021. Performance of bridge structures with RC and UHPC-strengthened pier under vessel head-on and side collisions. Changsha, China: Hunan Univ.
Sun, W., W. Fan, C. Yang, and W. Peng. 2021. “Lessons learned from vehicle collision accident of Dongguofenli bridge: FE modeling and analysis.” Eng. Struct. 244: 112813. https://doi.org/10.1016/j.engstruct.2021.112813.
Wang, J. J., Y. C. Song, W. Wang, and L. F. Tu. 2018. “Evaluation of composite crashworthy device for pier protection against barge impact.” Ocean Eng. 169: 144–158. https://doi.org/10.1016/j.oceaneng.2018.09.026.
Yan, B., D. Li, G. Xu, P. Zhu, and X. Shao. 2020. “Structural deformation test based on fast digital image correlation and regularization smoothing techniques.” China J. Highway Transport 33 (9): 193–205.
Yuan, P., and I. E. Harik. 2010. “Equivalent barge and flotilla impact forces on bridge piers.” J. Bridge Eng. 15 (5): 523–532. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000080.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Dec 15, 2021
Accepted: May 5, 2022
Published online: Jul 7, 2022
Published in print: Sep 1, 2022
Discussion open until: Dec 7, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Liu Yanhui, Khalil Al-Bukhaiti, Zhao Shichun, Hussein Abas, Xu Nan, Yang Lang, Yan Xing Yu, Han Daguang, Numerical study on existing RC circular section members under unequal impact collision, Scientific Reports, 10.1038/s41598-022-19144-1, 12, 1, (2022).
- T.L. Chen, H. Wu, Q. Fang, Dynamic behaviors of double-column RC bridge subjected to barge impact, Ocean Engineering, 10.1016/j.oceaneng.2022.112444, 264, (112444), (2022).