Seismic Performance of Precast Segmental Bridge Columns Reinforced with Both Stainless-Steel Bars and GFRP Bars
Publication: Journal of Bridge Engineering
Volume 27, Issue 1
Abstract
An innovative precast segmental bridge column (PSBC) was proposed to achieve a better durability performance in an aggressive coastal environment, which was reinforced with both longitudinal stainless steel (SS) bars and glass fiber reinforced polymer (GFRP) bars. Four 3/20-scale PSBCs with various ratios of GFRP to SS bars were tested quasi-statically. Test results showed that compared to SS-reinforced PSBCs (SR-PSBCs), the SS-GFRP-reinforced PSBCs (SFR-PSBCs) exhibited higher displacement ductility, less stiffness degradation, lower postyield stiffness ratios, and smaller residual drift ratios, although they presented lower lateral loading capacity and energy dissipation. Increasing the ratio of longitudinal GFRP bar to SS bar in SFR-PSBCs resulted in higher displacement ductility performance and more gentle stiffness degradation behavior. Furthermore, the increase of axial load affects the seismic behavior of SFR-PSBCs in an unfavorable way, which could result in severer damage, significant reduction in the displacement ductility, faster stiffness degradation beyond the peak lateral strength point, and increase in the residual displacement.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was financially supported by the National Key R&D Program of China under Grant No. 2019YFE0119800; the National Natural Science Foundation of China under Grant Nos. 51778024 and 51778019; the Beijing Natural Science Foundation under Grant No. 8202002; and the Key Laboratory of Transport Industry of Bridge Detection and Reinforcement Technology under Grant No. 2020-JQKFKT-1. Their support is gratefully acknowledged.
References
Abdelazim, W., M. Mohamed Hamdy, B. Benmokrane, and S. Nolan. 2020. “Strength of bridge high-strength concrete slender compression members reinforced with GFRP bars and spirals: Experiments and second-order analysis.” J. Bridge Eng. 25 (9): 04020066. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001601.
ACI (American Concrete Institute). 2015. Guide for the design and construction of concrete reinforced with FRP bars. Farmington Hills, MI: ACI.
Ali, M. A., and E. El-Salakawy. 2016. “Seismic performance of GFRP-reinforced concrete rectangular columns.” J. Compos. Constr. 20 (3): 04015074. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000637.
Bai, Y. L., Z. W. Yan, T. Ozbakkaloglu, J. G. Dai, J. F. Jia, and J. B. Jia. 2019. “Dynamic behavior of PET FRP and its preliminary application in impact strengthening of concrete columns.” Appl. Sci. 9 (23): 4987. https://doi.org/10.3390/app9234987.
Bai, Y. L., Z. W. Yan, T. Ozbakkaloglu, Q. Han, J. G. Dai, and D. J. Zhu. 2020. “Quasi-static and dynamic tensile properties of large-rupture-strain (LRS) polyethylene terephthalate fiber bundle.” Constr. Build. Mater. 232: 117241. https://doi.org/10.1016/j.conbuildmat.2019.117241.
Benmokrane, B., C. Nazair, M. A. Loranger, and A. Manalo. 2018. “Field durability study of vinyl-ester-based GFRP rebars in concrete bridge barriers.” J. Bridge Eng. 23 (12): 04018094. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001315.
Billah, A. H. M. M., and M. S. Alam. 2012. “Seismic performance of concrete columns reinforced with hybrid shape memory alloy (SMA) and fiber reinforced polymer (FRP) bars.” Constr. Build. Mater. 28 (1): 730–742. https://doi.org/10.1016/j.conbuildmat.2011.10.020.
Bu, Z. Y., Y. C. Ou, J. W. Song, N. S. Zhang, and G. C. Lee. 2016. “Cyclic loading test of unbonded and bonded posttensioned precast segmental bridge columns with circular section.” J. Bridge Eng. 21 (2): 04015043. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000807.
Cadoni, E., L. Fenu, and D. Forni. 2012. “Strain rate behaviour in tension of austenitic stainless steel used for reinforcing bars.” Constr. Build. Mater. 35: 399–407. https://doi.org/10.1016/j.conbuildmat.2012.04.081.
Cai, Z. K., Z. Y. Wang, and T. Y. Yang. 2018. “Experimental testing and modeling of precast segmental bridge columns with hybrid normal- and high-strength steel rebars.” Constr. Build. Mater. 166: 945–955. https://doi.org/10.1016/j.conbuildmat.2018.01.159.
Cai, Z. K., Z. Y. Wang, and T. Y. Yang. 2019. “Cyclic load tests on precast segmental bridge columns with both steel and basalt FRP reinforcement.” J. Compos. Constr. 23 (3): 04019014. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000944.
Cai, Z.-K., W. Yuan, Z. Wang, and S. T. Smith. 2021. “Seismic behavior of precast segmental bridge columns reinforced with hybrid FRP-steel bars.” Eng. Struct. 228: 111484.
Caprili, S., and W. Salvatore. 2015. “Cyclic behaviour of uncorroded and corroded steel reinforcing bars.” Constr. Build. Mater. 76: 168–186. https://doi.org/10.1016/j.conbuildmat.2014.11.025.
Castro, H., C. Rodriguez, F. J. Belzunce, and A. F. Canteli. 2003. “Mechanical properties and corrosion behaviour of stainless steel reinforcing bars.” J. Mater. Process. Technol. 143: 134–137. https://doi.org/10.1016/S0924-0136(03)00393-5.
Deng, Z. C., L. Gao, and X. Y. Wang. 2018. “Glass fiber-reinforced polymer-reinforced rectangular concrete columns under simulated seismic loads.” J. Braz. Soc. Mech. Sci. Eng. 40 (2): 111. https://doi.org/10.1007/s40430-018-1041-8.
ElGawady, M. A., and H. M. Dawood. 2012. “Analysis of segmental piers consisted of concrete filled FRP tubes.” Eng. Struct. 38: 142–152. https://doi.org/10.1016/j.engstruct.2012.01.001.
Frederic, L., and P. Patrick. 2000. “Behavior of high-strength concrete columns under cyclic flexure and constant axial load.” ACI Struct. J. 97 (4): 591–601.
GB (Guobiao Standard). 2002. Standard for test method of mechanical properties on ordinary concrete. GB/T50081. Beijing: Ministry of Housing and Urban-Rural Construction of China.
GB (Guobiao Standard). 2010a. Code for design of concrete structures. GB50010. Beijing: Ministry of Housing and Urban-Rural Construction of China.
GB (Guobiao Standard). 2010b. Technical code for infrastructure application of FRP composites. GB50608. Beijing: Ministry of Housing and Urban-Rural Construction of China.
GB (Guobiao Standard). 2010c. Metallic materials—Tensile testing—Part 1: Method of test at room temperature. GB/T228.1-2010. Beijing: Standardization Administration of China.
GB (Guobiao Standard). 2013. Test method for basic mechanical properties of fiber reinforced polymer bar. GB/T30022-2013. Beijing: Standardization Administration of China.
GB (Guobiao Standard). 2015. Code for application technique of cementitious grout. GB/T50448. Beijing: Ministry of Housing and Urban-Rural Construction of China.
Gooranorimi, O., and A. Nanni. 2017. “GFRP reinforcement in concrete after 15 years of service.” J. Compos. Constr. 21 (5): 04017024. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000806.
Ibrahim, A. M. A., Z. S. Wu, M. F. M. Fahmy, and D. Kamal. 2016. “Experimental study on cyclic response of concrete bridge columns reinforced by steel and basalt FRP reinforcements.” J. Compos. Constr. 20 (3): 04015062. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000614.
Jia, J. F., K. D. Zhang, S. W. Wu, Y. Guo, X. L. Du, and X. Wang. 2020a. “Seismic performance of self-centering precast segmental bridge columns under different lateral loading directions.” Eng. Struct. 221: 19.
Jia, J. F., L. Y. Zhao, S. W. Wu, X. Wang, Y. L. Bai, and Y. J. Wei. 2020b. “Experimental investigation on the seismic performance of low-level corroded and retrofitted reinforced concrete bridge columns with CFRP fabric.” Eng. Struct. 209: 110225. https://doi.org/10.1016/j.engstruct.2020.110225.
JRA (Japan Road Association). 2012. Design specifications for highway bridges, Part V seismic design—Commentary. Tokyo: JRA.
Kashani, M. M., L. N. Lowes, A. J. Crewe, and N. A. Alexander. 2014. “Finite element investigation of the influence of corrosion pattern on inelastic buckling and cyclic response of corroded reinforcing bars.” Eng. Struct. 75: 113–125. https://doi.org/10.1016/j.engstruct.2014.05.026.
Khaleghi, B., E. Schultz, S. Seguirant, L. Marsh, O. Haraldsson, M. Eberhard, and J. Stanton. 2012. “Accelerated bridge construction in Washington state: From research to practice.” PCI J. 57: 34–49. https://doi.org/10.15554/pcij.09012012.34.49.
Li, C., K. M. Bi, and H. Hao. 2019. “Seismic performances of precast segmental column under bidirectional earthquake motions: Shake table test and numerical evaluation.” Eng. Struct. 187: 314–328. https://doi.org/10.1016/j.engstruct.2019.03.001.
Li, C., H. Hao, and K. M. Bi. 2017. “Numerical study on the seismic performance of precast segmental concrete columns under cyclic loading.” Eng. Struct. 148: 373–386. https://doi.org/10.1016/j.engstruct.2017.06.062.
Lin, H. W., Y. X. Zhao, J. Ozbolt, and R. Hans-Wolf. 2017. “The bond behavior between concrete and corroded steel bar under repeated loading.” Eng. Struct. 140: 390–405. https://doi.org/10.1016/j.engstruct.2017.02.067.
Littleton, P., and J. Mallela. 2013. Iowa demonstration project: Accelerated bridge construction on US 6 over Keg Creek. Final Rep. Washington, DC: US Dept. of Transportation, Federal Highway Administration.
Liu, J., and S. Sheikh. 2013. “Glass fiber-reinforced polymer-reinforced circular columns under simulated seismic loads.” ACI Struct. J. 112: 941–952.
Manalo, A., G. Maranan, B. Benmokrane, P. Cousin, O. Alajarmeh, W. Ferdous, R. Liang, and G. Hota. 2020. “Comparative durability of GFRP composite reinforcing bars in concrete and in simulated concrete environments.” Cem. Concr. Compos. 109: 103564. https://doi.org/10.1016/j.cemconcomp.2020.103564.
Marsh, M. L., M. Wernli, B. E. Garrett, J. F. Stanton, M. O. Eberhard, and M. D. Weinert. 2011. Application of accelerated bridge construction connections in moderate-to-high seismic regions. Washington, DC: National Academies Press.
Mashal, M., S. White, and A. Palermo. 2016. “Quasi-static cyclic testing of emulative cast-in-place connections for accelerated bridge construction in seismic regions.” Bull N. Z. Soc. Earthquake Eng. 49 (3): 267–282. https://doi.org/10.5459/bnzsee.49.3.267-282.
Mateo, A., L. Llanes, N. Akdut, and M. Anglada. 2001. “High cycle fatigue behaviour of a standard duplex stainless steel plate and bar.” Mater. Sci. Eng. A Struct. Mater. Prop. Microstruct. Process. 319: 516–520. https://doi.org/10.1016/S0921-5093(01)01096-6.
Mohamed, H. M., M. Z. Afifi, and B. Benmokrane. 2014. “Performance evaluation of concrete columns reinforced longitudinally with FRP bars and confined with FRP hoops and spirals under axial load.” J. Bridge Eng. 19 (7): 04014020. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000590.
Mufti, A., and K. W. Neale. 2008. “State-of-the-art of FRP and SHM applications in bridge structures in Canada.” Compos. Res. J. 2 (2): 60–69.
Ou, Y. C., P. H. Wang, M. S. Tsai, K. C. Chang, and G. C. Lee. 2010. “Large-scale experimental study of precast segmental unbonded posttensioned concrete bridge columns for seismic regions.” J. Struct. Eng. 136 (3): 255–264. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000110.
Pang, J. B. K., M. O. Eberhard, and J. F. Stanton. 2010. “Large-bar connection for precast bridge bents in seismic regions.” J. Bridge Eng. 15 (3): 231–239. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000081.
Park, R. 1989. “Valuation of ductility of structures and structural assemblages from laboratory testing.” Bull. N. Z. Nat. Soc. Earthquake Eng. 22 (3): 155–166. https://doi.org/10.5459/bnzsee.22.3.155-166.
Paulay, T., and M. J. N. Priestly. 1992. Seismic design of reinforced concrete and masonry buildings. New York: Wiley.
Popa, V., A. Papurcu, D. Cotofana, and R. Pascu. 2014. “Experimental testing on emulative connections for precast columns using grouted corrugated steel sleeves.” Bull. Earthquake Eng. 13 (8): 2429–2447. https://doi.org/10.1007/s10518-014-9715-9.
Priestley, M. J. N., G. M. Calvi, and M. J. Kowalsky. 2007. Displacement based seismic design of structures. Pavia, Italy: IUSS Press.
Robert, M., and B. Benmokrane. 2010. “Physical, mechanical, and durability characterization of preloaded GFRP reinforcing bars.” J. Compos. Constr. 14 (4): 368–375. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000104.
Sideris, P., A. J. Aref, and A. Filiatrault. 2015. “Experimental seismic performance of a hybrid sliding-rocking bridge for various specimen configurations and seismic loading conditions.” J. Bridge Eng. 20 (11): 04015009. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000742.
Sung, Y. C., H. H. Hung, K. C. Lin, C. R. Jiang, and K. C. Chang. 2017. “Experimental testing and numerical simulation of precast segmental bridge piers constructed with a modular methodology.” J. Bridge Eng. 22 (11): 04017087. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001122.
Tazarv, M., and M. S. Saiidi. 2015. “UHPC-filled duct connections for accelerated bridge construction of RC columns in high seismic zones.” Eng. Struct. 99: 413–422. https://doi.org/10.1016/j.engstruct.2015.05.018.
Tazarv, M., and M. S. Saiidi. 2016. “Low-damage precast columns for accelerated bridge construction in high seismic zones.” J. Bridge Eng. 21 (3): 04015056. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000806.
Vu, N. S., B. Yu, and B. Li. 2016. “Prediction of strength and drift capacity of corroded reinforced concrete columns.” Constr. Build. Mater. 115: 304–318. https://doi.org/10.1016/j.conbuildmat.2016.04.048.
Wang, J. C., Y. C. Ou, K. C. Chang, and G. C. Lee. 2008. “Large-scale seismic tests of tall concrete bridge columns with precast segmental construction.” Earthquake Eng. Struct. Dyn. 37 (12): 1449–1465. https://doi.org/10.1002/eqe.824.
Wang, R., B. Ma, and X. Chen. 2021. “Seismic performance of pre-fabricated segmental bridge piers with grouted splice sleeve connections.” Eng. Struct. 229: 111668.
Wiles, P., A. Walker, and D. Idle. 2013. “The Auckland rail electrification project, New Zealand: Accelerated bridge construction in seismic zones.” Proc. Inst. Civ. Eng. Civ. Eng. 166 (5): 50–56. https://doi.org/10.1680/cien.12.00031.
Wu, X., L. L. Li, H. Li, B. L. Li, and Z. M. Ling. 2018. “Effect of strain level on corrosion of stainless steel bar.” Constr. Build. Mater. 163: 189–199. https://doi.org/10.1016/j.conbuildmat.2017.11.102.
Xu, C., M. L. Nehdi, M. A. Youssef, T. Wang, and L. V. Zhang. 2021. “Seismic performance of RC beam–column edge joints reinforced with austenite stainless steel.” Eng. Struct. 232: 111824.
Yin, F., L. Yang, M. Wang, L. Zong, and X. Chang. 2019. “Study on ultra-low cycle fatigue behavior of austenitic stainless steel.” Thin-Walled Struct. 143: 106205. https://doi.org/10.1016/j.tws.2019.106205.
Yuan, W. T., A. X. Guo, and H. Li. 2020. “Equivalent elastic modulus of reinforcement to consider bond–slip effects of coastal bridge piers with non-uniform corrosion.” Eng. Struct. 210: 110382. https://doi.org/10.1016/j.engstruct.2020.110382.
Zhang, G. X., C. W. Wang, and J. W. Huang. 2012. “Nonlinear analysis on stainless steel reinforced concrete columns under low-cyclic load.” Appl. Mech. Mater. 256–259: 588–591. https://doi.org/10.4028/www.scientific.net/AMM.256-259.588.
Zhang, Q., and M. S. Alam. 2020. “State-of-the-art review of seismic-resistant precast bridge columns.” J. Bridge Eng. 25 (10): 03120001. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001620.
Zhang, X. G., M. H. Li, L. P. Tang, S. A. Memon, G. J. Ma, F. Xing, and H. F. Sun. 2017. “Corrosion induced stress field and cracking time of reinforced concrete with initial defects: Analytical modeling and experimental investigation.” Corros. Sci. 120: 158–170. https://doi.org/10.1016/j.corsci.2017.01.012.
Zhang, Y. Y., W. Fan, Y. Zhai, and W. C. Yuan. 2019. “Experimental and numerical investigations on seismic behavior of prefabricated bridge columns with UHPFRC bottom segments.” J. Bridge Eng. 24 (8): 04019076. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001451.
Zhao, Y., C. Zhang, and X. Wang. 2020. “Experimental research on seismic behaviors of concrete columns with high-ductility stainless steel reinforcements.” [In Chinese.] J. Tongji Univ. (Nat. Sci.) 48 (6): 803–810.
Zhou, Y. W., X. B. Zheng, F. Xing, L. L. Sui, Y. W. Zheng, and X. X. Huang. 2020. “Investigation on the electrochemical and mechanical performance of CFRP and steel-fiber composite bar used for impressed current cathodic protection anode.” Constr. Build. Mater. 255: 119377. https://doi.org/10.1016/j.conbuildmat.2020.119377.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Dec 31, 2020
Accepted: Sep 16, 2021
Published online: Nov 10, 2021
Published in print: Jan 1, 2022
Discussion open until: Apr 10, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Jian-Yu Fu, Xiao Ge, Jian-Tao Li, Zhi-Guo Sun, Hui Qian, Dong-Sheng Wang, Experimental investigation of the seismic performance of precast post-tensioned segmental bridge piers with stainless energy-dissipating bars, Engineering Structures, 10.1016/j.engstruct.2023.115889, 283, (115889), (2023).
- Renda Zhao, Kaifeng Zheng, Xing Wei, Hongyu Jia, Xiaozhen Li, Qinghua Zhang, Guoji Xu, Yulin Zhan, Ruili Shen, Fang Zhang, Qianhui Pu, Hongye Gou, Chuanjin Yu, State-of-the-art and annual progress of bridge engineering in 2021, Advances in Bridge Engineering, 10.1186/s43251-022-00070-1, 3, 1, (2022).
- Kaiming Bi, Chao Li, Hong Hao, State-of-the-art review of the seismic performance of precast segmental columns, Advances in Bridge Engineering, 10.1186/s43251-022-00058-x, 3, 1, (2022).
- Mohamed FM Fahmy, Amr MA Moussa, Zhishen Wu, Precast bridge piers: Construction techniques, structural systems, and seismic response, Advances in Structural Engineering, 10.1177/13694332221133596, 26, 4, (611-639), (2022).
- Zhiqiang Wang, Penghui Zhang, Jiyan Zhang, Tiantian Li, Xingfei Yan, Hongya Qu, Seismic Performance Comparison of Precast Bridge Columns with Different Shear Span-to-Depth Ratios and Connection Designs via Quasi-Static Cyclic Test, Journal of Bridge Engineering, 10.1061/(ASCE)BE.1943-5592.0001904, 27, 10, (2022).
- Xu Wang, Yongguang Li, Suiwen Wu, Ran Li, Chunyu Tian, Quansheng Hou, Fengxiang Long, Seismic performance of a novel partly precast RC shear wall with double precast edge members and a central T-shape CIP member, Soil Dynamics and Earthquake Engineering, 10.1016/j.soildyn.2022.107481, 162, (107481), (2022).
- Zeyang Sun, Youjun Chen, Shi-Yu Xu, Yunlou Sun, Gang Wu, Shaking table test of concrete columns hybrid reinforced by steel/FRP bars, Journal of Building Engineering, 10.1016/j.jobe.2021.103938, 48, (103938), (2022).
- Guanyuan Zhao, Li Zhu, Suiwen Wu, Wei Liu, Shengjie Duan, Experimental and numerical investigation on the cross-sectional mechanical behavior of prefabricated multi-cabin RC utility tunnels, Structures, 10.1016/j.istruc.2022.06.025, 42, (466-479), (2022).
- Ehsan Govahi, Mojtaba Salkhordeh, Masoud Mirtaheri, Cyclic performance of different mitigation strategies proposed for segmental precast bridge piers, Structures, 10.1016/j.istruc.2021.12.020, 36, (344-357), (2022).
- Dade Lai, Cristoforo Demartino, Jinjun Xu, Jing Xu, Yan Xiao, GFRP bar RC columns under lateral low-velocity impact: an experimental investigation, International Journal of Impact Engineering, 10.1016/j.ijimpeng.2022.104365, 170, (104365), (2022).
- See more