Ultrahigh-Performance Concrete for Improving Impact Resistance of Bridge Superstructures to Overheight Collision
Publication: Journal of Bridge Engineering
Volume 26, Issue 9
Abstract
Collision of overheight vehicles into bridge superstructures often leads to structural damage, posing an immediate risk to the safety of motorists and the functionality of bridges. Considering the proven vulnerability of current high-strength concrete (HSC) girders to impact-induced forces, the use of ultrahigh-performance concrete (UHPC) (to fully or partially replace HSC) is expected to improve the impact resistance of bridge superstructures. However, despite the growing attention that UHPC has received for various bridge applications, this important application has remained largely unexplored. This motivated the current study to perform a holistic investigation to (1) quantify how the performance of bridge girders subjected to overheight collision can be improved by a one-to-one replacement of HSC with UHPC; (2) assess how UHPC can be considered as a material of choice for repairing existing bridge girders impacted by overheight vehicles; and (3) examine how equivalent UHPC girders designed for a performance similar to HSC girders under service loads can introduce advantages when subjected to overheight collision. For this purpose, upon validating a set of finite-element models with experimental test results, numerical simulations are performed on two types of AASHTO girders. The simulations cover two impacting objects, i.e., a concrete conduit pipe and a cylindrical steel tank, in addition to a tractor–semitrailer. The structural performance measures of the bridge girders made of HSC (entirely), UHPC (entirely), HSC repaired with UHPC, and equivalent UHPC are then evaluated and compared based on the recorded damage patterns, impact forces, internal shears, and lateral displacements. The outcome of this study provides the necessary details to shed light on how a transition from HSC to UHPC can contribute to improving the overall safety and performance of new and retrofitted bridges, especially when subjected to overheight collision.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All the data, models, and codes that support the findings of this study are available from the corresponding author upon reasonable request.
References
AASHTO. 2017. AASHTO LRFD bridge design specifications. 8th ed. Washington, DC: AASHTO.
Agrawal, A. K. 2013. Strikes on low clearance bridges by over-height trucks in New York state. UTC spotlight. Washington, DC: DOT.
Alahmari, T. S., C. S. Kennedy, A. M. Cuaron, B. D. Weldon, and D. V. Jáuregui. 2019. “Field testing of a prestressed concrete bridge with high performance and locally developed ultra-high performance concrete girders.” Front. Built Environ. 5: 114. https://doi.org/10.3389/fbuil.2019.00114.
Atalla, A., and A. M. Hammood. 2017. “Nonlinear analysis of bridge girders subjected to lateral impact loading.” J. Eng. Technol. 5 (1): 37–42.
AuYeung, S., and A. Alipour. 2016. “Evaluation of AASHTO suggested design values for reinforced concrete bridge piers under vehicle collisions.” Transp. Res. Rec. 2592 (1): 1–8. https://doi.org/10.3141/2592-01.
AuYeung, S., A. Alipour, and D. Saini. 2019. “Performance-based design of bridge piers under vehicle collision.” Eng. Struct. 191: 752–765. https://doi.org/10.1016/j.engstruct.2019.03.005.
Bierwagen, D., B. Moore, B. Keierleber, S. Sritharan, T. Wipf, and A. Abu-Hawash. 2010. “Design of Buchanan County, Iowa, bridge using ultra-high performance concrete and pi-girder cross section.” PCI Bridge 1: 1–31.
CEN (European Committee for Standardization). 2006. Actions on structures, Part 1.7. Eurocode 1. Brussels, Belgium: CEN.
Crawford, J. E., L. J. Malvar, J. W. Wesevich, J. Valancius, and A. D. Reynolds. 1997. “Retrofit of reinforced concrete structures to resist blast effects.” ACI Struct. J. 94 (4): 371–377.
Deng, Y., and C. Y. Tuan. 2013. “Design of concrete-filled circular steel tubes under lateral impact.” ACI Struct. J. 110 (4): 691–702.
Dioron, G. 2017. “UHPC pier repair/retrofit: Examples of completed projects in North America.” In AFG-ACI-fib-RILEM Int. Symp. on Ultra-High Performance Fiber-Reinforced Concrete, 983–992. Paris, France: RILEM.
El-Hacha, R., H. Elagroudy, and S. Rizkalla. 2004. “Bond characteristics of micro-composite multi-structural formable steel reinforcement.” In Proc., 5th Structural Specialty Conf. of the Canadian Society for Civil Engineering. Montreal, Canada: Canadian Society of Civil Engineering.
El-Tawil, S., E. Severino, and P. Fonseca. 2005. “Vehicle collision with bridge piers.” J. Bridge Eng. 10 (3): 345–353. https://doi.org/10.1061/(ASCE)1084-0702(2005)10:3(345).
Fan, W., D. Shen, Z. Zhang, X. Huang, and X. Shao. 2020. “A novel UHPFRC-based protective structure for bridge columns against vehicle collisions: Experiment, simulation, and optimization.” Eng. Struct. 207: 110247. https://doi.org/10.1016/j.engstruct.2020.110247.
Farzad, M., M. Shafieifar, and A. Azizinamini. 2019. “Retrofitting of bridge columns using UHPC.” J. Bridge Eng. 24 (12): 04019121. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001497.
Fujikake, K., B. Li, and S. Soeun. 2009. “Impact response of reinforced concrete beam and its analytical evaluation.” J. Struct. Eng. 135 (8): 938–950. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000039.
Fujikake, K., T. Senga, N. Ueda, T. Ohno, and M. Katagiri. 2006. “Effects of strain rate on tensile behavior of reactive powder concrete.” J. Adv. Concr. Technol. 4 (1): 79–84. https://doi.org/10.3151/jact.4.79.
Fujikake, K., K. Uebayashi, T. Ohno, Y. Shimoyama, and M. Katagiri. 2002. “Dynamic properties of steel fiber reinforced mortar under high-rates of loadings and triaxial stress states.” In Structures under shock and impact VII, edited by N. Jones, C. A. Brebbia, and A. M. Rajendran, 437–446. Southampton, UK: WIT Press.
Graybeal, B. 2011. Ultra-high performance concrete. Technote. Rep. No. FHWA-HRT-11-038. Washington, DC: Federal Highway Administration.
Graybeal, B. A. 2006. Material property characterization of ultra-high-performance concrete. Rep. No. FHWA-HRT-06-103. Washington, DC: Federal Highway Administration.
Guo, W., W. Fan, X. Shao, D. Shen, and B. Chen. 2018. “Constitutive model of ultra-high-performance fiber-reinforced concrete for low-velocity impact simulations.” Compos. Struct. 185: 307–326. https://doi.org/10.1016/j.compstruct.2017.11.022.
Haber, Z. B., I. De la Varga, B. A. Graybeal, B. Nakashoji, and R. El-Helou. 2018a. Properties and behavior of UHPC-class materials. Rep. No. FHWA-HRT-18-036. Washington, DC: Federal Highway Administration.
Haber, Z. B., and B. A. Graybeal. 2018. Performance of grouted connections for prefabricated bridge deck elements. Rep. No. FHWA-HIF-19-003. Washington, DC: Federal Highway Administration.
Haber, Z. B., J. Munoz, I. De la Varga, and B. A. Graybeal. 2018b. Ultra-high performance concrete for bridge deck overlays. Rep. No. FHWA-HRT-17-097. Washington, DC: Federal Highway Administration.
Harries, K. A., J. Kasan, R. Miller, and R. Brinkman. 2012. Updated research for collision damage and repair of prestressed concrete beams. Final Report. NCHRP Project 20-07. Washington, DC: National Cooperative Highway Research Program.
Jing, Y., Z. J. Ma, and D. B. Clarke. 2016. “Full-scale lateral impact testing of prestressed concrete girder.” Struct. Concr. 17 (6): 947–958. https://doi.org/10.1002/suco.201500224.
Karim, R., M. Najimi, and B. Shafei. 2019. “Assessment of transport properties, volume stability, and frost resistance of non-proprietary ultra-high performance concrete.” J. Constr. Build. Mater. 227: 117031. https://doi.org/10.1016/j.conbuildmat.2019.117031.
LSTC (Livermore Software Technology Corporation). 2016. LS-DYNA Theory manual. Livermore, CA: LSTC.
Maghiar, M., M. Jackson, and G. Maldonado. 2017. Warning systems evaluation for overhead clearance detection. Rep. No. FHWA-GA-16-1521. Forest Park, GA: Georgia DOT.
Malvar, L. J., and J. E. Crawford. 1998. “Dynamic increase factors for steel reinforcing bars.” In Proc., 28th DDESB Seminar, 1–17. Port Hueneme, CA: Naval Facilities Engineering Service Center.
Mohebbi, A., M. S. Saiidi, and A. M. Itani. 2017. “Seismic design of precast piers with pocket connections, CFRP tendons and ECC/UHPC columns.” Int. J. Bridge Eng. (Special issue): 99–123.
NTRC (National Transportation Research Center). 2018. FEM models for semitrailer trucks. Knoxville, TN: NTRC.
Oppong, K., D. Saini, and B. Shafei. 2020. “Vulnerability assessment of bridge piers damaged in barge collision to subsequent hurricane events.” J. Bridge Eng. 25 (8): 04020051. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001576.
Ozyildirim, C. 2011. Evaluation of ultra-high performance fiber-reinforced concrete. Rep. No. FHWA/VCTIR12-R1. Richmond, VA: Federal Highway Administration.
Qiao, P., M. Yang, A. Mosallam, and G. Song. 2008. An over-height collision protection system of sandwich polymer composites integrated with remote monitoring for concrete bridge girders. Columbus, OH: Ohio DOT.
Russell, H. G., and B. A. Graybeal. 2013. Ultra-high performance concrete: A state-of-the-art report for the bridge community. Rep. No. FHWA-HRT-13-060. Washington, DC: Federal Highway Administration.
Saini, D., and B. Shafei. 2017. “Performance evaluation of concrete filled steel tube bridge piers under vehicle impact.” In Transportation Research Board Annual Meeting, 1–15. Washington, DC: Transportation Research Board.
Saini, D., and B. Shafei. 2019a. “Concrete constitutive models for low velocity impact simulations.” Int. J. Impact Eng. 132: 103329. https://doi.org/10.1016/j.ijimpeng.2019.103329.
Saini, D., and B. Shafei. 2019b. “Performance of concrete-filled steel tube bridge columns subjected to vehicle collision.” J. Bridge Eng. 24 (8): 04019074. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001439.
Saini, D., and B. Shafei. 2019c. “Investigation of concrete-filled steel tubes strengthened with CFRP against impact loads.” Compos. Struct. 208: 744–757. https://doi.org/10.1016/j.compstruct.2018.09.057.
Saini, D., and B. Shafei. 2019d. “Prediction of extent of damage to metal roof panels under hail impact.” Eng. Struct. 187: 362–371. https://doi.org/10.1016/j.engstruct.2019.02.036.
Saini, D., and B. Shafei. 2020. “Performance of structural insulated panels with metal skins subjected to windborne debris impact.” Composites, Part B 198: 108163. https://doi.org/10.1016/j.compositesb.2020.108163.
Shafei, B., B. Phares, and W. Shi. 2020. Beam end repair for prestressed concrete beams. Final Rep. Ames, IA: Iowa DOT.
Shafei, B., B. Phares, S. Sritharan, M. Najimi, and T. Hosteng. 2019. Laboratory and field evaluation of an alternative UHPC mix and associated UHPC bridge. Final Rep. Ames, IA: Iowa DOT.
Sharma, H., and S. Hurlebaus. 2012. “Overheight collision protection measures for bridges.” In Structures Congress, edited by J. Carrato and J. Burns, 790–797. Reston, VA: ASCE.
Taylor, C. W., B. D. Weldon, D. V. Jáuregui, and C. M. Newtson. 2013. “Case studies using ultrahigh-performance concrete for prestressed girder bridge design.” Pract. Period. Struct. Des. Constr. 18 (4): 261–267. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000167.
Tong, T., H. Lei, S. Yuan, and Z. Liu. 2020. “Experimental investigation and seismic vulnerability assessment of low flexural strength rectangular bridge piers retrofitted with ultrahigh-performance concrete jackets.” Eng. Struct. 206: 110132. https://doi.org/10.1016/j.engstruct.2019.110132.
Turner-Fairbank Highway Research Center. 2006. Optimized sections for high-strength concrete bridge girders: Effect of deck concrete strength. Rep. No. FHWA-HRT-05-058. Washington, DC: FHWA.
Wei, J., J. Li, and C. Wu. 2019. “An experimental and numerical study of reinforced conventional concrete and ultra-high performance concrete columns under lateral impact loads.” Eng. Struct. 201: 109822. https://doi.org/10.1016/j.engstruct.2019.109822.
Xu, L., X. Lu, H. Guan, and Y. Zhang. 2013. “Finite-element and simplified models for collision simulation between over-height trucks and bridge superstructures.” J. Bridge Eng. 18 (11): 1140–1151. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000472.
Xu, L. J., X. Z. Lu, S. T. Smith, and S. T. He. 2012. “Scaled model test for collision between over-height truck and bridge superstructure.” Int. J. Impact Eng. 49: 31–42. https://doi.org/10.1016/j.ijimpeng.2012.05.003.
Yang, C., and P. Okumus. 2017. “Ultrahigh-performance concrete for posttensioned precast bridge piers for seismic resilience.” J. Struct. Eng. 143 (12): 04017161. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001906.
Yang, M., and P. Qiao. 2010. “Analysis of cushion systems for impact protection design of bridges against overheight vehicle collision.” Int. J. Impact Eng. 37 (12): 1220–1228. https://doi.org/10.1016/j.ijimpeng.2010.06.007.
Yoo, D. Y., N. Banthia, S. W. Kim, and Y. S. Yoon. 2015. “Response of ultra-high-performance fiber-reinforced concrete beams with continuous steel reinforcement subjected to low-velocity impact loading.” Compos. Struct. 126: 233–245. https://doi.org/10.1016/j.compstruct.2015.02.058.
Yoo, D. Y., N. Banthia, and Y. S. Yoon. 2017. “Impact resistance of reinforced ultra-high-performance concrete beams with different steel fibers.” ACI Struct. J. 114 (1): 113–124.
Youssef, M. H., E. A. Ahmed, and B. Benmokrane. 2019. “Structural behavior of GFRP-RC bridge deck slabs connected with UHPFRC joints under flexure and shear.” J. Bridge Eng. 24 (9): 1–14. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001475.
Yuan, J., and B. Graybeal. 2016. “Full-scale testing of shear key details for precast concrete box-beam bridges.” J. Bridge Eng. 21 (9): 04016043. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000906.
Zhou, Z., and P. Qiao. 2018. “Direct tension test for characterization of tensile behavior of ultra-high performance concrete.” J. Test. Eval. 48 (4): 1–21.
Information & Authors
Information
Published In
Journal of Bridge Engineering
Volume 26 • Issue 9 • September 2021
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Nov 22, 2019
Accepted: Mar 5, 2021
Published online: Jun 23, 2021
Published in print: Sep 1, 2021
Discussion open until: Nov 23, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Ran Cao, Xun Zuo, Anil Kumar Agrawal, Sherif El-Tawil, Waider Wong, Evaluating the Performance of Protection Beams Subject to Overheight Vehicular Impacts Using Analytical and Machine Learning–Based Methods, Journal of Bridge Engineering, 10.1061/JBENF2.BEENG-5984, 28, 12, (2023).
- Renda Zhao, Kaifeng Zheng, Xing Wei, Hongyu Jia, Xiaozhen Li, Qinghua Zhang, Guoji Xu, Yulin Zhan, Ruili Shen, Fang Zhang, Qianhui Pu, Hongye Gou, Chuanjin Yu, State-of-the-art and annual progress of bridge engineering in 2021, Advances in Bridge Engineering, 10.1186/s43251-022-00070-1, 3, 1, (2022).
- Linjun Lu, Fei Dai, Automated visual surveying of vehicle heights to help measure the risk of overheight collisions using deep learning and view geometry, Computer-Aided Civil and Infrastructure Engineering, 10.1111/mice.12842, 38, 2, (194-210), (2022).
- Kofi Oppong, Dikshant Saini, Behrouz Shafei, Multihazard Performance Assessment of Scoured Bridges Subjected to Barge Collision, Journal of Bridge Engineering, 10.1061/(ASCE)BE.1943-5592.0001876, 27, 7, (2022).
- Xiuchen Xu, Hongchao Zhang, Xiaobo Du, Qiang Liu, Vehicle collision with RC structures: A state-of-the-art review, Structures, 10.1016/j.istruc.2022.08.107, 44, (1617-1635), (2022).
- Maziar Kazemian, Behrouz Shafei, Internal curing capabilities of natural zeolite to improve the hydration of ultra-high performance concrete, Construction and Building Materials, 10.1016/j.conbuildmat.2022.127452, 340, (127452), (2022).
- Abhijit Kulkarni, Behrouz Shafei, Siamak Epackachi, Structural response assessment of ultra‐high performance concrete shear walls under cyclic lateral loads, Structural Concrete, 10.1002/suco.202200195, (2022).
- Abhijit Kulkarni, Behrouz Shafei, Ultra-high performance concrete building wall panels engineered to resist windborne debris impact, Journal of Building Engineering, 10.1016/j.jobe.2021.103004, 42, (103004), (2021).
- Dikshant Saini, Kofi Oppong, Behrouz Shafei, Investigation of Concrete Constitutive Models for Ultra-High Performance Fiber-Reinforced Concrete under Low-Velocity Impact, International Journal of Impact Engineering, 10.1016/j.ijimpeng.2021.103969, 157, (103969), (2021).
- Dikshant Saini, Behrouz Shafei, A Novel Design Procedure for CFRP-Strengthened Concrete-Filled Steel Tubes to Resist Impact Loads, 10th International Conference on FRP Composites in Civil Engineering, 10.1007/978-3-030-88166-5_71, (823-835), (2021).