Residual Axial Capacity Estimates for Bridge Columns Subjected to Combined Vehicle Collision and Air Blast
Publication: Journal of Bridge Engineering
Volume 26, Issue 7
Abstract
Columns are the primary load-carrying components in the bridge, and column failure could initiate the collapse of the entire bridge. Estimates of residual axial capacity for round, bridge pier columns under combined vehicle collision and air blast were studied using high-fidelity, fully coupled finite-element computational models. The models included single reinforced concrete (RC) columns, pile foundation systems, and surrounding soil and air volumes. Modeling techniques were validated with existing full-scale, impact and blast experimental results. Validated column models were subsequently impacted by a Ford F800 Single-Unit Truck (SUT) and subjected to an air blast created by considering fluid–structure interaction (FSI) using a multimaterial arbitrary Lagrangian–Eulerian (MM-ALE) formulation. A parametric study was completed that examined effects of load parameters, column diameter and height, axial load ratio, longitudinal reinforcement ratio, and shear reinforcement spacing on column residual axial capacity to establish critical parameters influencing performance. An empirical equation estimating residual axial capacity was developed using multivariate regression analysis involving the critical parameters. Based on the proposed equation, the column residual axial capacity could be estimated to predict its resistance against failure and assess collapse risk for the bridge when subjected to collision and blast combination.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was funded, in part, by the Mid-America Transportation Center via a grant from the US Department of Transportation’s University Transportation Centers Program, and this support is gratefully acknowledged. The authors gratefully acknowledge the University of Nebraska’s Holland Computing Center for providing computational resources.
References
AASHTO. 2017. AASHTO LRFD bridge design specifications. 8th ed. Washington, DC: AASHTO.
Abdelkarim, O. I., and M. A. ElGawady. 2017. “Performance of bridge piers under vehicle collision.” Eng. Struct. 140: 337–352. https://doi.org/10.1016/j.engstruct.2017.02.054.
AuYeung, S., and A. Alipour. 2016. “Evaluation of AASHTO suggested design values for reinforced concrete bridge piers under vehicle collisions.” Transp. Res. Rec. 2592 (1): 1–8. https://doi.org/10.3141/2592-01.
Bao, X., and B. Li. 2010. “Residual strength of blast damaged reinforced concrete columns.” Int. J. Impact Eng. 37 (3): 295–308. https://doi.org/10.1016/j.ijimpeng.2009.04.003.
Baylot, J. T., and T. L. Bevins. 2007. “Effect of responding and failing structural components on the airblast pressures and loads on and inside of the structure.” Comput. Struct. 85 (11–14): 891–910. https://doi.org/10.1016/j.compstruc.2007.01.001.
Brown, M. D., and A. S. Loewe. 2003. Reference manual to mitigate potential terrorist attacks against buildings. Washington, DC: FEMA.
Cao, R., A. K. Agrawal, S. El-Tawil, X. Xu, and W. Wong. 2019. “Heavy truck collision with bridge piers: Computational simulation study.” J. Bridge Eng. 24 (6): 04019052. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001398.
Cooper, P. W. 2018. Explosives engineering. Hoboken, NJ: Wiley.
Coughlin, A. M., E. S. Musselman, A. J. Schokker, and D. G. Linzell. 2010. “Behavior of portable fiber reinforced concrete vehicle barriers subject to blasts from contact charges.” Int. J. Impact Eng. 37 (5): 521–529. https://doi.org/10.1016/j.ijimpeng.2009.11.004.
Do, T. V., T. M. Pham, and H. Hao. 2018. “Dynamic responses and failure modes of bridge columns under vehicle collision.” Eng. Struct. 156: 243–259. https://doi.org/10.1016/j.engstruct.2017.11.053.
DOT. 2013. Single-unit straight trucks in traffic crashes. Washington, DC: NHTSA’s National Center for Statistics and Analysis.
Fujikake, K., B. Li, and S. Soeun. 2009. “Impact response of reinforced concrete beam and its analytical evaluation.” J. Struct. Eng. 135 (8): 938–950. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000039.
Fujikura, S., M. Bruneau, and D. Lopez-Garcia. 2008. “Experimental investigation of multihazard resistant bridge piers having concrete-filled steel tube under blast loading.” J. Bridge Eng. 13 (6): 586–594. https://doi.org/10.1061/(ASCE)1084-0702(2008)13:6(586).
George, D., and P. Mallery. 2019. IBM SPSS statistics 26 step by step: A simple guide and reference. London: Routledge.
Gomez, N. L. 2014. “Performance of circular reinforced concrete bridge piers subjected to vehicular collisions.” Master thesis, Dept. of Civil and Environmental Engineering, Univ. of Massachusetts Amherst.
Hallquist, J. O. 2014. LS-DYNA keyword user’s manual. Livermore, CA: Livermore Software Technology Corporation (LSTC).
Jayasinghe, L. B., D. P. Thambiratnam, N. Perera, and J. H. A. R. Jayasooriya. 2013. “Computer simulation of underground blast response of pile in saturated soil.” Comput. Struct. 120: 86–95. https://doi.org/10.1016/j.compstruc.2013.02.016.
Koneshwaran, S., D. P. Thambiratnam, and C. Gallage. 2015. “Blast response of segmented bored tunnel using coupled SPH–FE method.” In Proc., Structures, 58–71. Amsterdam, Netherlands: Elsevier.
Leech, N. L., K. C. Barrett, and G. A. Morgan. 2014. IBM SPSS for intermediate statistics: Use and interpretation. London: Routledge.
Lewis, B. A. 2004. Manual for LS-DYNA soil material model 147. Springfield, VA: Federal Highway Administration.
Lomax, R. G., and D. L. Hahs-Vaughn. 2013. An introduction to statistical concepts. London: Routledge and CRC.
Mays, G., P. D. Smith, and P. D. Smith. 1995. Blast effects on buildings: Design of buildings to optimize resistance to blast loading. London: Thomas Telford.
Mohan, P., D. Marzougui, and C. D. Kan. 2007. “Validation of a single unit truck model for roadside hardware impact.” Int. J. Veh. Syst. Model. Test. 2 (1): 1–15. https://doi.org/10.1504/IJVSMT.2007.011423.
Murray, Y. D. 2007. Users manual for LS-DYNA concrete material model 159. McLean, VA: US Dept. of Transportation.
Murray, Y. D., A. Y. Abu-Odeh, and R. P. Bligh. 2007. Evaluation of LS-DYNA concrete material model 159. McLean, VA: US Dept. of Transportation.
Norusis, M. J. 2012. IBM SPSS statistics 19: Guide to data analysis. Upper Saddle River, NJ: Prentice Hall.
O’Hare, E. V. 2011. “Computational assessment of steel-jacketed bridge pier column performance under blast loads.” Master thesis, Dept. of Civil and Environmental Engineering, Pennsylvania State Univ.
Reese, L., T. Qiu, D. Linzell, E. O’Hare, and Z. Rado. 2014. “Field tests and numerical modeling of vehicle impacts on a boulder embedded in compacted fill.” Int. J. Prot. Struct. 5 (4): 435–451. https://doi.org/10.1260/2041-4196.5.4.435.
Reid, J. D., B. A. Coon, B. A. Lewis, S. H. Sutherland, and Y. D. Murray. 2004. Evaluation of LS-DYNA soil material model 147. McLean, VA: Federal Highway Administration.
Shi, Y., H. Hao, and Z.-X. Li. 2008. “Numerical derivation of pressure–impulse diagrams for prediction of RC column damage to blast loads.” Int. J. Impact Eng. 35 (11): 1213–1227. https://doi.org/10.1016/j.ijimpeng.2007.09.001.
Stockemer, D. 2019. “Multivariate regression analysis.” In Quantitative methods for the social sciences, 163–174. Dordrecht, Netherlands: Springer. https://doi.org/10.1007/978-3-319-99118-4_9.
Thilakarathna, H. M. I., D. P. Thambiratnam, M. Dhanasekar, and N. Perera. 2010. “Numerical simulation of axially loaded concrete columns under transverse impact and vulnerability assessment.” Int. J. Impact Eng. 37 (11): 1100–1112. https://doi.org/10.1016/j.ijimpeng.2010.06.003.
Times Free Press. 2014. “Times Free Press news archive.” Accessed August 15, 2014.https://www.timesfreepress.com/news/local/story/2014/aug/15/tanker-truck-explosion-kills-1-i-65-tennessee/264519/.
Wassef, W., C. Smith, C. Clancy, and M. Smith. 2003. Comprehensive design example for prestressed concrete (PSC) girder superstructure bridge with commentary. Washington, DC: Federal Highway Administration, US Government Printing Office.
Williamson, E. B. 2010. Blast-resistant highway bridges: Design and detailing guidelines. Washington, DC: Transportation Research Board.
Williamson, E. B., O. Bayrak, C. Davis, and G. D. Williams. 2011. “Performance of bridge columns subjected to blast loads. I: Experimental program.” J. Bridge Eng. 16 (6): 693–702. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000220.
Woodson, S. C., and J. T. Baylot. 1999. Structural collapse: Quarter-scale model experiments. Vicksburg, MS: Army Engineer Research and Development Center, Waterways Experiment Station Station Structures Laboratory.
Wu, K.-C., B. Li, and K.-C. Tsai. 2011. “Residual axial compression capacity of localized blast-damaged RC columns.” Int. J. Impact Eng. 38 (1): 29–40. https://doi.org/10.1016/j.ijimpeng.2010.09.002.
Xu, X., R. Cao, S. El-Tawil, A. K. Agrawal, and W. Wong. 2019. “Loading definition and design of bridge piers impacted by medium-weight trucks.” J. Bridge Eng. 24 (6): 04019042. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001397.
Yi, Z., A. K. Agrawal, M. Ettouney, and S. Alampalli. 2014. “Blast load effects on highway bridges. I: Modeling and blast load effects.” J. Bridge Eng. 19 (4): 04013023. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000547.
Information & Authors
Information
Published In
Journal of Bridge Engineering
Volume 26 • Issue 7 • July 2021
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Sep 10, 2020
Accepted: Mar 3, 2021
Published online: May 5, 2021
Published in print: Jul 1, 2021
Discussion open until: Oct 5, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Qusai A. Alomari, Daniel G. Linzell, Reinforced Concrete Bridge Column Multihazard Performance: A Computational Tool to Assess Response to Vehicle Impact, Air Blast, and Fire, Journal of Performance of Constructed Facilities, 10.1061/JPCFEV.CFENG-4598, 38, 1, (2024).
- Hao Xu, Qiyuan Li, Dongcai Li, Haonan Jiang, Tong Wang, Qingfei Gao, Experimental and Numerical Investigation of the Anti-Overturning Theory of Single-Column Pier Bridges, Sustainability, 10.3390/su15021545, 15, 2, (1545), (2023).
- Bo Hu, Yu-Yang Liu, Yong Li, Hai-Bo Wang, Residual Deformation-Based Performance Evaluation Method for CFST Piers Subjected to Vehicle Collision, Journal of Performance of Constructed Facilities, 10.1061/JPCFEV.CFENG-4211, 37, 2, (2023).
- Tewodros Y. Yosef, Chen Fang, Ronald K. Faller, Seunghee Kim, A multi-material ALE model for investigating impact dynamics of pile-soil systems, Soil Dynamics and Earthquake Engineering, 10.1016/j.soildyn.2022.107648, 164, (107648), (2023).
- Chen Fang, Daniel G. Linzell, Tewodros Y. Yosef, Jennifer D. Rasmussen, Numerical Modeling and Performance Assessment of Bridge Column Strengthened by FRP and Polyurea under Combined Collision and Blast Loading, Journal of Composites for Construction, 10.1061/(ASCE)CC.1943-5614.0001188, 26, 2, (2022).
- Xiuchen Xu, Hongchao Zhang, Xiaobo Du, Qiang Liu, Vehicle collision with RC structures: A state-of-the-art review, Structures, 10.1016/j.istruc.2022.08.107, 44, (1617-1635), (2022).