Low-Frequency Electromagnetic Energy Harvesting from Highway Bridge Vibrations
Publication: Journal of Bridge Engineering
Volume 25, Issue 8
Abstract
This paper focuses on energy harvesting from low-frequency vibrations in bridges via an electromagnetic device. Two pre-stressed concrete highway bridges are considered as case studies. In situ vibration measurements are reported and analyzed. An electromagnetic vibration energy harvester (VEH) with a low resonant frequency (tunable around 4 Hz) has been designed. The VEH is of the cantilever type, with 12 magnets mounted on a beam and acting as an inertial mass. By electromagnetic induction, the moving magnets produce an electric current in a surrounding conductive coil. A single-degree-of-freedom model of the VEH is presented with the main purpose of estimating the electrical power generated under various operating conditions. A procedure for identifying the model parameters from simple measurements is described. Optimizing the coil geometry so as to maximize the electromechanical coupling is crucial to maximize the output power. That issue does not seem to have been addressed in the literature and is discussed in detail in this paper. The coil that has been fabricated approximates that optimal geometry. For harmonic excitation with normalized amplitude, the designed VEH achieves the best power density to date among experimentally validated low-frequency electromagnetic VEHs. During a field test on a highway bridge, the harvester produced an average power of 112 μW through a load resistance of 3.3 kΩ. We present a simple formula for estimating the output power of electromagnetic VEHs in terms of traffic intensity. That formula could be useful in future studies related to vibration energy harvesting in bridges.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank Roland Vidal (SNCF), Amer Abouzeid (Sixense), Xavier Chapeleau (IFSTTAR), and Erick Merliot (IFSTTAR) for their help.
References
Ali, S., M. Friswell, and S. Adhikari. 2011. “Analysis of energy harvesters for highway bridges.” J. Intell. Mater. Syst. Struct. 22 (16): 1929–1938. https://doi.org/10.1177/1045389X11417650.
Bunks, C., J.-P. Chancelier, F. Delebecque, M. Goursat, R. Nikoukhah, and S. Steer. 2012. Engineering and scientific computing with Scilab. Berlin: Springer Science & Business Media.
Cahill, P., A. Mathewson, and V. Pakrashi. 2018. “Experimental validation of piezoelectric energy-harvesting device for built infrastructure applications.” J. Bridge Eng. 23 (8): 04018056. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001262.
Cai, Q., and S. Zhu. 2019. “Enhancing the performance of electromagnetic damper cum energy harvester using microcontroller: Concept and experiment validation.” Mech. Syst. Sig. Process. 134: 106339. https://doi.org/10.1016/j.ymssp.2019.106339.
Cai, Q., and S. Zhu. 2020. “Unified strategy for overall impedance optimization in vibration-based electromagnetic energy harvesters.” Int. J. Mech. Sci. 165: 105198. https://doi.org/10.1016/j.ijmecsci.2019.105198.
Carson, J. R. 1931. “The statistical energy-frequency spectrum of random disturbances.” Bell Syst. Tech. J. 10 (3): 374–381. https://doi.org/10.1002/bltj.1931.10.issue-3.
Caruso, G., G. Chirianni, and G. Vairo. 2016. “Energy harvesting from wind-induced bridge vibrations via electromagnetic transduction.” Eng. Struct. 115: 118–128. https://doi.org/10.1016/j.engstruct.2016.02.020.
Clough, R. W., and J. Penzien. 1975. Structural dynamics. New York: McGraw-Hill.
Cottone, F., R. Frizzell, S. Goyal, G. Kelly, and J. Punch. 2014. “Enhanced vibrational energy harvester based on velocity amplification.” J. Intell. Mater. Syst. Struct. 25 (4): 443–451. https://doi.org/10.1177/1045389X13498316.
Drake, A. W. 1967. Fundamentals of applied probability theory. New York: McGraw-Hill.
Elvin, N. G., and A. A. Elvin. 2011. “An experimentally validated electromagnetic energy harvester.” J. Sound Vib. 330 (10): 2314–2324. https://doi.org/10.1016/j.jsv.2010.11.024.
Galchev, T., J. McCullagh, R. Peterson, and K. Najafi. 2011. “Harvesting traffic-induced vibrations for structural health monitoring of bridges.” J. Micromech. Microeng. 21 (10): 104005. https://doi.org/10.1088/0960-1317/21/10/104005.
Harne, R., and K. Wang. 2013. “A review of the recent research on vibration energy harvesting via bistable systems.” Smart Mater. Struct. 22 (2): 023001. https://doi.org/10.1088/0964-1726/22/2/023001.
Iqbal, M., and F. U. Khan. 2018. “Hybrid vibration and wind energy harvesting using combined piezoelectric and electromagnetic conversion for bridge health monitoring applications.” Energy Convers. Manage. 172: 611–618. https://doi.org/10.1016/j.enconman.2018.07.044.
Jackson, J. D. 1975. Classical electrodynamics. Hoboken, NJ: John Wiley & Sons.
Jung, H.-J., I.-H. Kim, and S.-J. Jang. 2011. “An energy harvesting system using the wind-induced vibration of a stay cable for powering a wireless sensor node.” Smart Mater. Struct. 20 (7): 075001. https://doi.org/10.1088/0964-1726/20/7/075001.
Kwon, S.-D., J. Park, and K. Law. 2013. “Electromagnetic energy harvester with repulsively stacked multilayer magnets for low frequency vibrations.” Smart Mater. Struct. 22 (5): 055007. https://doi.org/10.1088/0964-1726/22/5/055007.
Mam, K., M. Peigney, and D. Siegert. 2017. “Finite strain effects in piezoelectric energy harvesters under direct and parametric excitations.” J. Sound Vib. 389: 411–437. https://doi.org/10.1016/j.jsv.2016.11.022.
MeteoFrance. 2019. Public data.
Mix, D. F. 1995. Random signal processing. Upper Saddle River, NJ: Prentice-Hall.
Peigney, M., and D. Siegert. 2013. “Piezoelectric energy harvesting from traffic-induced bridge vibrations.” Smart Mater. Struct. 22 (9): 095019. https://doi.org/10.1088/0964-1726/22/9/095019.
Priya, S., and D. J. Inman. 2009. Vol. 21 of Energy harvesting technologies. Berlin: Springer.
Reilly, E. K., F. Burghardt, R. Fain, and P. Wright. 2011. “Powering a wireless sensor node with a vibration-driven piezoelectric energy harvester.” Smart Mater. Struct. 20 (12): 125006. https://doi.org/10.1088/0964-1726/20/12/125006.
Siegert, D., L. Mevel, E. Reynders, G. De Roeck, and M. Goursat. 2009. “Variation of modal parameter estimates of a prestressed concrete bridge.” In Proc., 27th Int. Modal Analysis Conf., SEM, Orlando.
Smythe, W. B. 1988. Static and dynamic electricity. New York: Hemisphere.
Stephen, N. G. 2006. “On energy harvesting from ambient vibration.” J. Sound Vib. 293 (1–2): 409–425. https://doi.org/10.1016/j.jsv.2005.10.003.
Toyabur, R., M. Salauddin, H. Cho, and J. Y. Park. 2018. “A multimodal hybrid energy harvester based on piezoelectric-electromagnetic mechanisms for low-frequency ambient vibrations.” Energy Convers. Manage. 168: 454–466. https://doi.org/10.1016/j.enconman.2018.05.018.
Zuo, L., X. Chen, and S. Nayfeh. 2011. “Design and analysis of a new type of electromagnetic damper with increased energy density.” J. Vib. Acoust. 133 (4): 041006. https://doi.org/10.1115/1.4003407.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Sep 4, 2019
Accepted: Feb 18, 2020
Published online: Jun 4, 2020
Published in print: Aug 1, 2020
Discussion open until: Nov 4, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.