Optimal Force-Based Beam-Column Element Size for Reinforced-Concrete Piles in Bridges
Publication: Journal of Bridge Engineering
Volume 21, Issue 11
Abstract
The nonobjective disadvantages of the force-based frame element, such as the nonobjective curvature prediction, have been discussed by many researchers. The trial-and-error method is commonly used to determine element size, but it could cost tremendous computational efforts. This paper proposes and analytically studies the optimal element size for reinforced-concrete piles for bridges when using force-based beam elements. In this study, the relationship between the optimum element size and integration point number is investigated, and the equivalent plastic hinge length is used and correlated to the optimal element size, on the basis of which the moment-curvature and force-displacement responses are objective and the soil effects on the pile response could be simulated sufficiently as required. The results of a case study show that both the local and global responses can be very well predicted, and the nonobjective disadvantage of the force-based element could be eliminated using the proposed optimal element size. Additionally, the optimal element size with more than two integration points is suggested for modeling the plastic hinge in the pile above the ground.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work is financially supported by the Ministry of Science and Technology of China under Grant SLDRCE15-B-05 and the National Natural Science Foundation of China under grants 50878147 and 51278375. This support is gratefully acknowledged. Any opinions expressed in this paper are those of the writers and do not necessarily reflect those of the sponsors. The authors also thank the Kawashima Laboratory for kindly sharing the experiment data.
References
AASHTO. (2007). AASHTO guide specifications for LRFD seismic bridge design, 4th Ed., Washington, DC.
Boulanger, R., Curras, C., Kutter, B., Wilson, D., and Abghari, A. (1999). “Seismic soil-pile-structure interaction experiments and analyses.” J. Geotech. Geoenviron. Eng., 750–759.
Brown, J., and Kunnath, S. K. (2000). “Low cycle fatigue behavior of longitudinal reinforcement in reinforced concrete bridge columns.” MCEER Tech. Rep. 00-0007, State Univ. of New York, Buffalo, NY.
Chai, Y. (2002). “Flexural strength and ductility of extended pile-shafts. i: analytical model.” J. Struct. Eng., 586–594.
Chai, Y., and Hutchinson, T. (2002). “Flexural strength and ductility of extended pile-shafts. II: Experimental study.” J. Struct. Eng., 595–602.
Coleman, J., and Spacone, E. (2001). “Localization issues in force-based frame elements.” J. Struct. Eng., 1257–1265.
Correial, A. A., Almeida, J. P., and Pinho, R. (2008). “Force-based versus displacement-based formulations in the cyclic nonlinear analysis of RC frames.” Proc., 14th World Conf. on Earthquake Engineering, China Earthquake Administration, Ministry of Housing and Urban-Rural Development, Beijing.
Gomes, A., and Appleton, J. (1997). “Nonlinear cyclic stress-strain relationship of reinforcing bars including buckling.” Eng. Struct., 19(10), 822–826.
Hellesland, J., and Scordelis, A. (1981). “Analysis of RC bridge columns under imposed deformations.” IABSE colloquium, Delft: Advanced mechanics of reinforced concrete, International Association of Bridge and Structural Engineering, Zurich, Switzerland, 545–559.
Hutchinson, T. C. (2001). “Characterization and evaluation of the seismic performance of pile-supported bridge structures.” Ph.D. dissertation, Univ. of California, Davis, CA.
Hutchinson, T. C., Boulanger, R. W., Chai, Y. H., and Idriss, I. M. (2002). “Inelastic seismic response of extended pile shaft supported bridge structures.” CA:Rep. No. PEER 2002/14, Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, CA.
Mari, A., and Scordelis, A. (1984). “Nonlinear geometric material and time dependent analysis of three dimensional reinforced and prestressed concrete frames.” SESM Rep. 82-12, Dept. of Civil Engineering, Univ. of California, Berkeley, CA.
Mazzoni, S., et al. (2006). “Open System for earthquake engineering simulation (OpenSees): User manual.” ⟨http://opensees.berkeley.edu/OpenSees/manuals/usermanual/index.html⟩ (Jan. 1, 2014).
Neuenhofer, A., and Filippou, F. (1997). “Evaluation of nonlinear frame finite-element models.” J. Struct. Eng., 958–966.
OpenSees 2.0 [Computer software]. Pacific Earthquake Engineering Research Center, Berkeley, CA.
Paulay, T., and Priestley, M. J. N. (1992). “Seismic design of reinforced concrete and masonry buildings, John Wiley & Sons, New York.
Scott, B. D., Park, R., and Priestley, M. J. N. (1982). “Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates.” ACI J, 79(1), 13–27.
Scott, M., Fenves, G., McKenna, F., and Filippou, F. (2008). “Software patterns for nonlinear beam-column models.” J. Struct. Eng., 562–571.
Spacone, E., Filippou, F. C., and Taucer, F. F. (1996a). “Fibre beam column model for nonlinear analysis of R/C frames I: Formulation.” Earthquake Eng. Struct. Dyn., 25(7), 711–725.
Spacone, E., Filippou, F. C., and Taucer, F. F. (1996b). “Fibre beam column model for nonlinear analysis of R/C frames. II: Applications.” Earthquake Eng. Struct. Dyn., 25(7), 727–742.
Wallace, J. W., Fox, P. J., Stewart, J. P., Janoyan, K., Qiu, T., and Lermitte, S. (2001). “Cyclic large deflection testing of shaft bridges-Part I: Background and field test results.” Rep. on research conducted under Grant No. 59A0183 from the California Dept. of Transportation, Dept. of Civil and Environmental Engineering, Univ. of California, Los Angeles, CA.
Wang, S., Kutter, B. L., Chacko, J. M., Wilson, D. W., Boulanger, R. W., and Abghari, A. (1998). “Nonlinear seismic soil-pile structure interaction.” Earthquake Spectra, 14(2), 377–396.
Zeris, C., and Mahin, S. (1988). “Analysis of reinforced concrete beam-columns under uniaxial excitation.” J. Struct. Eng., 804–820.
Zeris, C., and Mahin, S. (1991). “Behavior of reinforced concrete structures subjected to biaxial excitation.” J. Struct. Eng., 2657–2673.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Oct 8, 2015
Accepted: Feb 29, 2016
Published online: May 13, 2016
Discussion open until: Oct 13, 2016
Published in print: Nov 1, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.