Safety of Cable-Supported Bridges during Fire Hazards
Publication: Journal of Bridge Engineering
Volume 21, Issue 4
Abstract
Understanding of the performance of critical bridges, such as cable-supported bridges, during accidental fire is necessary for developing mitigation strategies against potential fire damage. In this research, the structure–fire interaction of long-span cable-supported bridges, in particular, anchored suspension bridges, self-anchored suspension bridges, and cable-stayed bridges, was investigated through nonlinear finite-element analysis. To investigate the stability of these bridges during fire, a typical steel orthotropic box girder was exposed to different fire scenarios representing fires during ship and truck accidents. The stability of the three bridges during two fire scenarios was investigated in terms of fire intensity and duration and axial compressive force in the deck. Simulation results indicate that the existing axial force in the deck negatively affected the structural performance by causing buckling failure under fire loads. Generally, anchored suspension bridges had the largest safety factor among the three bridges because of nearly zero axial force in the deck. On the other hand, self-anchored suspension bridges had a significantly higher amount of existing axial compressive force in the deck and were the most vulnerable during both the truck and the ship fire scenarios. The axial forces in cable-stayed bridge decks varied longitudinally. Hence, their vulnerability during fires depends on the location of fire, the magnitude of existing axial force, and the design capacity of the deck.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2010). LRFD bridge design specifications, 4th Ed., Washington, DC.
Abaqus [Computer software]. Dassault Systèmes, Paris.
Alnahhal, W. I., Chiewanichakorn, M., Aref, A. J., and Alampalli, S. (2006). “Temporal thermal behavior and damage simulations of FRP deck.” J. Bridge Eng., 452–464.
Aziz, E., and Kodur, V. (2013). “An approach for evaluating the residual strength of fire exposed bridge girders.” J. Constr. Steel Res., 88, 34–42.
Bennetts, I., and Moinuddin, K. (2009). “Evaluation of the impact of potential fire scenarios on structural elements of a cable-stayed bridge.” J. Fire Prot. Eng., 19(2), 85–106.
CEN (European Committee for Standardization). (2002). “Actions on structures. Part 1–2: General action, action on structures exposed to fire.” Eurocode 1, Brussels, Belgium.
CEN (European Committee for Standardization). (2005). “Design of steel structures, Part 1–2: General rules, structural fire design.” Eurocode 3, Brussels, Belgium.
Choi, J. (2008). “Concurrent fire dynamics models and thermomechanical analysis of steel and concrete structures.” Ph.D. thesis, Georgia Institute of Technology, Atlanta, GA.
Connor, R., et al. (2012). Manual for design, construction, and maintenance of orthotropic steel Deck bridges. Federal Highway Administration, Washington, DC.
Fire Dynamics Simulator [Computer software]. NIST, Gaithersburg, MD.
Garlock, M., Paya-Zaforteza, I., Kodur, V., and Gu, L. (2012). “Fire hazard in bridges: Review, assessment and repair strategies.” Eng. Struct., 89–98.
Gimsing, N. J., and Georgakis, C. T. (2011). Cable supported bridges: Concept and design, John Wiley & Sons, New York.
Gong, X. (2015). “Behavior of bridges during fire.” Enclosure fire dynamics, Doctoral dissertation, City College of New York, New York.
Gong, X., and Agrawal, A. K. (2014). “Numerical simulation of fire damage to a long-span truss bridge.” J. Bridge Eng., 04014109.
Karlsson, B., and Quintiere, J. (2002). Enclosure fire dynamics, CRC Press, Boca Raton, FL.
Kodur, V. K. R., and Naser, M. Z. (2013). “Importance factor for design of bridges against fire hazard.” Eng. Struct., 54, 207–220.
McGrattan, K., McDermott, R., Hostikka, S., and Floyd, J. (2010). Fire dynamics simulator (version 5), user’s guide, NIST-Building Fire Research Laboratory, Gaithersburg, MD.
Mendes, P. A., Valente, J. C., and Branco, F. A. (2000). “Simulation of ship fire under Vasco da Gama Bridge.” ACI Struct. J., 97(2), 285–290.
NFPA. (1985). “Guide for smoke and heat venting.” NFPA 204M, Boston, MA.
Nigro, E., Manfredi, G., Cosenza, E., and Zappoli, M. (2006). “Effects of high temperature on the performances of RC bridge decks strengthened with externally bonded FRP reinforcement.” Proc., 2nd Int. Congress, Fédération Internationale du Béton, Naples, Italy.
Noble, C. R., Wemhoff, A. P., and McMichael, L. D. (2008). “Thermal-structural analysis of the MacArthur Maze Freeway collapse.” Proc., ASME 2008 Summer Heat Transfer Conf., ASME, New York, 10–14.
Payá-Zaforteza, I., and Garlock, M. E. M. (2012). “A numerical investigation on the fire response of a steel girder bridge.” J. Const. Steel Res., 75, 93–103.
Son, J., and Astaneh-Asl, A. (2008). “Increasing blast-resistance of cable-stayed and suspension bridges.” Rep. No. UCB/CEE-STEEL-08/01, Dept. of Civil and Environmental Engineering, Univ. of California, Berkeley, CA.
Yarnold, M. T., Wilson, J. L., Jen, W. C., and Yen, B. T. (2007). “Local buckling analysis of trapezoidal rib orthotropic bridge deck systems.” Bridge Struct., 3(2), 93–103.
Usmani, A. S., Rotter, J. M., Lamont, S., Sanad, A. M., and Gillie, M. (2001). “Fundamental principles of structural behaviour under thermal effects.” Fire Saf. J., 36(8), 721–744.
Information & Authors
Information
Published In
Journal of Bridge Engineering
Volume 21 • Issue 4 • April 2016
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Oct 2, 2014
Accepted: Oct 5, 2015
Published online: Jan 20, 2016
Published in print: Apr 1, 2016
Discussion open until: Jun 20, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.