Change Localization of a Steel-Stringer Bridge through Long-Gauge Strain Measurements
Publication: Journal of Bridge Engineering
Volume 21, Issue 3
Abstract
Development of the long-gauge fiber-optic sensor provides an excellent opportunity for structural-change localization, because it measures averaged strains over a long gauge length. A practical structural-change localization, procedure using long-gauge dynamic strains in the modal space is proposed to process the ambient vibration data of a steel-stringer bridge. The proposed procedure is easy to execute by general bridge engineers; meanwhile, it has a solid theoretical basis, thus guaranteeing its effectiveness. By theoretically deriving the magnitude ratios between the analytical strain frequency response functions (FRFs) and the estimated strain FRFs from ambient vibration data, it is proved that the proposed procedure is the same as using long-gauge strain mode shapes for change location; therefore, it is effective and much simpler for general bridge engineers to use. An ambient vibration test of a steel-stringer bridge using long-gauge fiber-optic sensors has been performed. The results of applying the proposed method to the measured and simulated data of the bridge have successfully verified its effectiveness for structural-change localization.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was sponsored by the National Science Foundation of China (51108076).
References
Adewuyi, A. P., Wu, Z. S., and Kammrujaman Serker, N. H. M. (2009). “Assessment of vibration-based damage identification methods using displacement and distributed strain measurements.” Struct. Health Monit., 8(6), 443–461.
Ansari, F. (2007). “Practical implementation of optical fiber sensors in civil structural health monitoring.” J. Intell. Mater. Syst. Struct., 18(8), 879–889.
ASCE SEI Committee on Structural Identification of Constructed Systems. (2011). “Structural identification of constructed facilities: Approaches, methods and technologies for effective practice of St-Id.” F. N. Catbas, T. Kijewski-Correa, and A. E. Aktan, eds., ASCE, Reston, VA.
Bagchi, A., Humar, J., Xu, P., and Noman, A. S. (2010). “Model-based damage identification in a continuous bridge using vibration data.” J. Perform. Constr. Facil.,148–158.
Catbas, F. N., Brown, D. L., and Aktan, A. E. (2006). “Use of modal flexibility for damage detection and condition assessment: Case studies and demonstrations on large structures.” J. Struct. Eng., 1699–1712.
Catbas, F. N., Gokce, H. B., and Gul, M. (2012). “Nonparametric analysis of structural health monitoring data for identification and localization of changes: Concept, lab, and real-life studies.” Struct. Health Monit., 11(5), 613–626.
Catbas, F. N., Susoy, M., and Frangopol D. M. (2008). “Structural health monitoring and reliability estimation: Long span truss bridge application with environmental monitoring data.” Eng Struct., 30(9), 2347–2359.
Conte, J. P., et al. (2008). “Dynamic testing of Alfred Zampa Memorial Bridge.” J. Struct. Eng., 1006–1015.
Gul, M., and Catbas, F. N. (2008). “Ambient vibration data analysis for structural identification and global condition assessment.” J. Eng. Mech., 650–662.
He, X. F., Moaveni, B., Conte, J. P., Elgamal, A., and Masri, S. F. (2009). “System identification of Alfred Zampa Memorial Bridge using dynamic field test data.” J. Struct. Eng., 54–66.
Huth, O., Feltrin, G., Maeck, J., Kilic, N., and Motavalli, M. (2005). “Damage identification using modal data: Experiences on a prestressed concrete bridge.” J. Struct. Eng., 1898–1910.
James, G. H., Carne, T. G., and Lauffer, J. P. (1993). “Natural excitation technique (NExT) for modal parameter extraction from operating wind turbines.” Int. J. Anal. Exp. Modal Anal., 10(4), 260–277.
Li, S. Z., and Wu, Z. S. (2007). “Development of distributed long-gage fiber optic sensing system for structural health monitoring.” Struct. Health Monit., 6(2), 133–143.
Li, Y. Y. (2010). “Hypersensitivity of strain-based indicators for structural damage identification: A review.” Mech. Syst. Sig. Process., 24(3), 653–664.
Murayama, H., Kageyama, K., Ohara, K., Uzawa, K., and Kanai, M. (2008). “Novel measurement system with optic fiber sensor for strain distribution in welded tubular joints.” Proc., ASME 27th Int. Conf. on Offshore Mechanics and Arctic Engineering, Vol. 5, 439–446.
SAP2000 14.2.4 [Computer software]. Computers and Structures, Berkeley, CA.
Weidner, J., Prader, J., Moon, F., and Aktan, E. (2011). Static, crawl, ambient and forced vibration testing (Technical Report), Drexel Univ., Philadelphia.
Xu, Z. D., Liu, M., Wu, Z. S., and Zeng, X. (2011). “Energy damage detection strategy based on strain responses for long-span bridge structures.” J. Bridge Eng., 644–652.
Zhang, H., and Wu, Z. S. (2008). “Performance evaluation of BOTDR-based distributed fiber optic sensors for crack monitoring.” Struct. Health Monit., 7(2), 143–156.
Zhang, J., Guo, S. L., and Chen, X. (2014). “Theory of un-scaled flexibility identification from output-only data.” Mech. Syst. Sig. Process., 48(1–2), 232–246.
Zhang, J., Hong, W., Tang, Y. S., Yang, C. Q., Wu, G., and Wu, Z. S. (2013a). “Structural health monitoring of a steel stringer bridge with area sensing.” Struct. Infrastruct. Eng., 10(8), 1049–1058.
Zhang, J., Prader, J., Grimmelsman, K. A., Moon, F., Aktan, A. E., and Shama, A. (2013b). “Experimental vibration analysis for structural identification of a long-span suspension bridge.” J. Eng. Mech., 748–759.
Zhang, J., Zhou, Y., and Li, P. J. (2015). “Practical issues in signal processing for structural flexibility identification.” Smart Struct. Syst., 15(1), 209–225.
Zhou, Z. J., Wegner, L. D., and Sparling, B. D. (2007). “Vibration-based detection of small-scale damage on a bridge deck.” J. Struct. Eng., 1257–1267.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Nov 8, 2014
Accepted: Apr 17, 2015
Published online: Oct 2, 2015
Published in print: Mar 1, 2016
Discussion open until: Mar 2, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.