Response-Spectrum Analysis for Barge Impacts on Bridge Structures
Publication: Journal of Bridge Engineering
Volume 20, Issue 12
Abstract
Bridge structures that span navigable waterways are inherently at risk for barge collision incidents and therefore must be designed for impact loading. Current U.S. barge impact analysis procedures consist primarily of static load analysis methods that do not explicitly account for dynamic effects in barge–bridge collisions, and thus are not ideally suited to designing bridge structures to resist barge impacts. Therefore, the development of dynamic-analysis methods for estimating the responses of bridge structures to barge collisions is warranted. Dynamic-analysis procedures that use numerical time-integration techniques are capable of capturing pertinent dynamic effects but often yield voluminous amounts of time-varying results that must be post processed for use in design. In contrast, response-spectrum analysis (RSA) procedures are capable of directly producing maximum response parameters that are most pertinent to structural design. In this paper, an RSA procedure is proposed for use in barge impact analysis of bridges. The efficacy of the procedure is demonstrated for a bridge pier that was included in a series of full-scale impact experiments. The results obtained using the procedure are shown to be conservative when compared with data derived from the full-scale experiments.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors thank the Florida Department of Transportation for providing the financial support, under Contract No. BD-545 RPWO 29, that made this study possible.
References
ASCE. (2005). “Minimum design loads for buildings and other structures”. ASCE 7-05, Reston, VA.
BSI (Bridge Software Institute). (2008). FB-multipier user’s manual, Univ. of Florida, Gainesville, FL.
CEN. (2002). “Actions on structures. Part 1-7: General actions. Accidental actions due to impact and explosion.” Draft prEN 1991-1-7 Eurocode 1, Brussels, Belgium.
Chopra, A. K. (2011). Dynamics of structures: Theory and applications to earthquake engineering, 4th Ed., Pearson Prentice-Hall, Englewood Cliffs, NJ.
Consolazio, G. R., Cook, R. A., McVay, M. C., Cowan, D. R., Biggs, A. E., and Bui, L. (2006). “Barge impact testing of the St. George Island Causeway Bridge Phase III: Physical testing and data interpretation.” Structures Research Rep. No. 26868, Engineering and Industrial Experiment Station, Univ. of Florida, Gainesville, FL.
Consolazio, G. R., and Cowan, D. R. (2005). “Numerically efficient dynamic analysis of barge collisions with bridge piers.” J. Struct. Eng., 1256–1266.
Consolazio, G. R., Cowan, D. R., Biggs, A., Cook, R. A., Ansley, M., and Bollmann, H. T. (2005). “Full-scale experimental measurement of barge impact loads on bridge piers.” Transportation Research Record 1936, Transportation Research Board, Washington, DC, 81–93.
Consolazio, G. R., and Davidson, M. T. (2008). “Simplified dynamic barge collision analysis for bridge design.” Transportation Research Record 2050, Transportation Research Board, Washington, DC, 13–25.
Consolazio, G. R., Hendrix, J. L., McVay, M. C., Williams, M. E., and Bollmann, H. T. (2004). “Prediction of pier response to barge impacts using design-oriented dynamic finite element analysis.” Transportation Research Record 1868, Transportation Research Board, Washington, DC, 177–189.
Consolazio, G. R., McVay, M. C., Cowan, D. R., Davidson, M. T., and Getter, D. J. (2008). “Development of improved design provisions for barge impact loading.” Structures Research Rep. No. 2008/51117, EIES, Univ. of Florida, Gainesville, FL.
Davidson, M. T., Consolazio, G. R., and Getter, D. (2010). “Dynamic amplification of pier column internal forces due to barge–bridge collision.” Transportation Research Record 2172, Transportation Research Board, Washington, DC, 11–22.
FEMA. (2003). NEHRP recommended provisions for seismic regulations for new buildings and other structures, Washington, DC.
McVay, M. C., Wasman, S. J., and Bullock, P. J. (2005). “Barge impact testing of St. George Island Causeway Bridge geotechnical investigation.” Research Rep. No. BD545 RPWO #5, EIES, UF, Gainesville, FL.
McVay, M. C., Wasman, S. J., Consolazio, G. R., Bullock, P. J., Cowan, D. R., and Bollmann, H. T. (2009). “Dynamic soil-structure interaction of bridge superstructure subject to vessel impact.” J. Bridge Eng., 7–16.
Tedesco, J. W., McDougal, W. G., and Ross, C. A. (1999). Structural dynamics: Theory and applications, Addison Wesley Longman, Inc., Menlo Park, CA.
Yuan, P., Harik, I. E., and Davidson, M. T. (2008). “Multi-barge flotilla impact forces on bridges.” Research Rep. No. KTC-08-13/SPR261-03-2F, Kentucky Transportation Center, Univ. of Kentucky, Lexington, KY.
Information & Authors
Information
Published In
Journal of Bridge Engineering
Volume 20 • Issue 12 • December 2015
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Feb 24, 2014
Accepted: Dec 22, 2014
Published online: Apr 24, 2015
Discussion open until: Sep 24, 2015
Published in print: Dec 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.