Abstract
Structural health monitoring (SHM) of bridges by visual inspection is not necessarily reliable as many damages are not discovered during the periodic inspection of bridges. A technique to assist in visual inspection is vibration-based SHM. It is believed that structural damages lead to changes in stiffness and damping properties, and change the dynamic characteristics of structures, such as natural frequency, mode shape, and modal damping ratio. Although changes in the modal damping ratio can be used as damage indicators in the field of vibration-based SHM, the method’s accuracy remains concerning. This study investigated the analytical modal damping evaluation as a complementary method to the experimental SHM of bridges. An energy-based damping model was introduced to estimate the damping parameters of a steel arch bridge, such as the equivalent loss factors of structural components, and the modal damping ratios of the bridge were then analytically evaluated using the damping parameters. The results confirmed that the proposed methodology can identify the damping sources in steel bridges and their contributions to each modal damping ratio, and complements the experimental SHM of bridges.
Get full access to this article
View all available purchase options and get full access to this article.
References
Allemang, R. J. (2003). “The modal assurance criterion: Twenty years of use and abuse.” Sound Vib., 37(8), 14–23.
Astaneh-Asl, A. (2008). “Progressive collapse of steel truss bridges, the case of I-35W collapse.” Proc., 7th Int. Conf. on Steel Bridges, ECCS, Brussels, Belgium.
Carden, E. P., and Fanning, P. (2004). “Vibration based condition monitoring: A review.” Struct. Health Monit., 3(4), 355–377.
Curadelli, R. O., Riera, J. D., Ambrosini, D., and Amani, M. G. (2008). “Damage detection by means of structural damping identification.” Eng. Struct., 30(12), 3497–3504.
Doebling, S. W., Farrar, C. R., Prime, M. B., and Shevitz, D. W. (1996). “Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review.” Rep. LA-13070-MS, Los Alamos National Laboratory, Los Alamos, NM.
Frizzarin, M., Feng, M. Q., Franchetti, P., Soyoz, S., and Modena, C. (2010). “Damage detection based on damping analysis of ambient vibration data.” Struct. Contr. Health Monit., 17(4), 368–385.
Juang, J.-N., and Pappa, R. S. (1985). “An eigensystem realization algorithm for modal parameter identification and model reduction.” J. Guid. Control Dyn., 8(5), 620–627.
Kawashima, K., Nagashima, H., and Iwasaki, H. (1994). “Evaluation of modal damping ratio based on strain energy proportional damping method.” Proc., 9th U.S.–Japan Bridge Engineering Workshop, Public Works Research Institute (PWRI), 211–226.
Lingmi, Z. (2004). “An overview of major developments and issues in modal identification.” Proc., Int. Modal Analysis Conf. XXII, Society for Experimental Mechanics, Bethel, CT.
Nashif, A. D., Jones, D. I., and Henderson, J. P. (1985). Vibration damping, Wiley, New York, 45–50.
Pappa, R., and Ibrahim, S. R. (1981). “A parametric study of the Ibrahim time domain modal identification algorithm.” Shock Vib. Bull., 51(3), 43–72.
Pappa, R. S., Elliott, K. B., and Schenk, A. (1993). “Consistent-mode indicator for the eigensystem realization algorithm.” J. Guid. Control Dyn., 16(5), 852–858.
Sakamoto, H., Nagai, K., Sakata, H., and Egusa, T. (1986). “Construction report and study on suppressing wind-induced vibration of Tomari-Ohashi Bridge.” J. Japan Soc. Civ. Eng., 375(5), 93–102 (in Japanese).
Siringoringo, D. M., and Fujino, Y. (2008). “System identification of suspension bridge from ambient vibration response.” Eng. Struct., 30(2), 462–477.
Yamaguchi, H., and Ito, M. (1997). “Mode-dependence of structural damping in cable-stayed bridges.” J. Wind Eng. Ind. Aerodyn., 72(Nov–Dec), 289–300.
Yamaguchi, H., and Matsumoto, Y. (2002). “Modal damping of bridges and its energy based evaluation.” Proc., Int. Modal Analysis Conf. XX, Society for Experimental Mechanics, Bethel, CT, 1612–1618.
Yamaguchi, H., Takano, H., Ogasawara, M., Shimosato, T., Kato, M., and Kato, H. (1997). “Energy-based damping evaluation of cable-stayed bridges and application to Tsurumi Tsubasa bridge.” Struct. Eng. Earthquake Eng. Japan Soc. Civ. Eng., 14(2), 201s–213s.
Yang, J. N., Lei, Y., Pan, S., and Huang, N. (2003). “System identification of linear structures based on Hilbert–Huang spectral analysis. Part 1: Normal modes.” Earthquake Eng. Struct. Dynam., 32(9), 1443–1467.
Yoshioka, T., Yamaguchi, H., and Matsumoto, Y. (2010). “Structural health monitoring of steel truss bridges based on modal damping changes in local and global modes.” Proc., 5th World Conf. on Structural Control and Monitoring, International Association for Structural Control and Monitoring, Los Angeles.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Jan 22, 2014
Accepted: Aug 15, 2014
Published online: Sep 9, 2014
Published in print: Jul 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.