Bridge Deck and Guardrail Anchorage Detailing for Sustainable Construction
Publication: Journal of Bridge Engineering
Volume 19, Issue 10
Abstract
This paper investigates the use of glass fiber reinforced polymer (GFRP) bar bents as stirrups at the joint between the steel posts of a bridge guardrail system with a deck slab cantilever. In addition, GFRP bars with headed ends are used for better anchorage at the postdeck slab joint. Four full-scale cantilever post specimens were erected and tested to collapse. Two specimens were reinforced with steel bars as control specimens, whereas the other two specimens were reinforced with GFRP straight bars, bent bars, and headed bars at applicable locations. Similar failure modes were observed in all specimens because of curb external side face breakout. Failure occurred in unconfined concrete cover because of significant compressive and frictional shear stresses and also torsional effects, resulting in concrete spalling at the side face of the cantilever at the bottom of the posts. Although it is recommended to consider larger edge distance of the post to prevent premature failure in the unconfined concrete cover, the obtained experimental capacity of the postcurb region was concluded to be sufficient to resist design loads. To calculate the share of the design lateral loads received by each post, a linear finite-element analysis (FEA) and a simplified FEA were used. The analysis showed that the share of each post decreases with decrease in spacing between posts.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers of this report thank Schoeck Canada Inc. for supporting this research on the use of GFRP bars in bridge deck slabs. The authors thank Mr. Tony Wing, Transportation Chief Engineer of McCormick Rankin Corporation (MRC), for his valuable comments on GFRP bar arrangement and the experimental test setup. The authors sincerely acknowledge the support provided by Fonds Québécois de la Recherche sur la Nature et les Technologies in the form of a postdoctoral bursary to the first author and Ryerson University Scholarly Research and Creative Activity (SRC) fund.
References
AASHTO. (2009). AASHTO-LRFD bridge design guide specifications for GFRP-reinforced concrete bridge decks and traffic railings, Washington, DC.
AASHTO. (2012). AASHTO-LRFD bridge design specifications, 6th Ed., Washington, DC.
Ahmed, E., Matta, F., and Benmokrane, B. (2013). “Steel post-and-beam barrier with GFRP-reinforced concrete curb and bridge deck connection.” J. Bridge Eng., 1189–1197.
American Concrete Institute (ACI). (2011). Building code requirements for structural concrete (ACI 318M-11) and commentary, Farmington Hills, MI.
Canadian Standards Association (CSA). (2004). “Design of concrete structures.” CSA standard A23.3-04, Mississauga, ON, Canada.
Canadian Standards Association (CSA). (2006a). “Canadian highway bridge design code (CHBDC).” CAN/CSA-S6-06, Toronto.
Canadian Standards Association (CSA). (2006b). “Commentary on CAN/CSA-S6-10, Canadian highway bridge design code (CHBDC).” CAN/CSA-S6.1-06, Toronto.
Cook, R. A., and Klingner, R. E. (1989). “Behavior and design of ductile multiple anchor steel to concrete connections.” Rep. No. CTR 1126-3, Univ. of Texas at Austin, Austin, TX.
DeWolf, J. T., and Ricker, D. T. (2003). Column base plates, steel design guide series no. 1, AISC, Chicago.
El-Gamal, S., Tobbi, H., El-Sayed, A., and Benmokrane, B. (2007). “Impact testing of concrete bridge barriers reinforced with new GFRP bars (types 201 and 301).” Technical Rep., Univ. of Sherbrooke, Sherbrooke, QC, Canada, 84.
Eligehausen, R., Mallee, R., and Silva, J. (2006). Anchorage in concrete construction, Ernst & Sohn, Berlin.
Hite, M., DesRoches, R., and Leon, R. T. (2008). “Full-scale tests of bridge steel pedestals.” J. Bridge Eng., 483–491.
Matta, F., and Nanni, A. (2009). “Connection of concrete railing post and bridge deck with internal FRP reinforcement.” J. Bridge Eng., 66–76.
SAP2000 [Computer software]. Berkeley, CA, Computers and Structures.
Schoeck Canada Inc. (2013). “Schöck ComBAR technical information.” 〈http://www.contechaccessories.com/attachments/combar_technical.pdf〉 (Jun. 25, 2013).
Sennah, K., Juette, B., Weber, A., and Witt, C. (2011a). “Vehicle crash testing of a GFRP-reinforced PL-3 concrete bridge barrier.” Proc., 4th International Conf. on Durability & Sustainability of Fiber Reinforced Polymer Composites for Construction and Rehabilitation, Univ. of Sherbrooke, Sherbrooke, QC, Canada, 417–424.
Sennah, K., Nikravan, N., Louie, J., Hassaan, A., and El-Sayed, M., Al-Bayati, N. (2011b). “Experimental study on bridge deck-guard rail anchorage incorporating both GFRP bent bars and GFRP with headed studs.” Report prepared for Shoeck Canada Inc., Kitchener, ON, Canada.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Aug 6, 2013
Accepted: Feb 18, 2014
Published online: Mar 20, 2014
Discussion open until: Aug 20, 2014
Published in print: Oct 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.