Impact of Damper Stiffness and Damper Support Stiffness on the Efficiency of a Linear Viscous Damper in Controlling Stay Cable Vibrations
Publication: Journal of Bridge Engineering
Volume 19, Issue 4
Abstract
Accurate prediction of optimum damper size and its corresponding maximum attainable modal damping ratio is essential for the design of a linear viscous damper to control cable vibrations on cable-stayed bridges. The stiffness within the damper and the damper support would affect both the required damper size and the resulting equivalent modal damping ratio of the damped cable and thus influence the damper efficiency. An experimental study on a cable-damper system is conducted to investigate the individual and the combined effects of damper stiffness and damper support stiffness on the performance of a linear viscous damper. A finite-element model of the corresponding cable-damper system is developed to verify the experimental results and further study these two parameters within the typical ranges of cable and damper properties used on real bridges. Results show that higher damper stiffness and/or lower damper support stiffness would have an adverse impact on damper performance. Increasing the stiffness of a damper and/or its support would result in a larger optimum damper size. However, the maximum attainable damping ratio would decrease with larger damper stiffness but increase if the support is more rigid. To facilitate practical design, a set of asymptotic relationships has been proposed, of which the optimum damper size and the maximum achievable damping ratio are expressed concisely as functions of nondimensional damper properties in terms of its location, stiffness, and support stiffness. Design examples are given to illustrate the various applications of the proposed refined damper design tool.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful to the Natural Sciences and Engineering Research Council of Canada (NSERC) for supporting this project.
References
ANSYS. (2011). “ANSYS 14.0 documentation.” Canonsburg, PA.
Butterworth, S. (1930). “On the theory of filter amplifiers.” Wireless Engineer, 7, 536–541.
Caracoglia, L., and Jones, N. P. (2005). “In-plane dynamic behavior of cable networks. Part 2: Prototype prediction and validation.” J. Sound Vib., 279(3-5), 993–1014.
Caracoglia, L., and Zuo, D. (2009). “Effectiveness of cable networks of various configurations in suppressing stay-cable vibration.” Eng. Struct., 31(12), 2851–2864.
Cheng, S., Deravandi, N., and Ghrib, F. (2010). “The design of an optimal viscous damper for a bridge stay cable using energy-based approach.” J. Sound Vib., 329(22), 4689–4704.
Fujino, Y., and Hoang, N. (2008). “Design formulas for damping of a stay cable with a damper.” J. Struct. Eng., 269–278.
Huang, L. (2011). “Experimental study on bridge stay cable vibration mitigation using external viscous damper.” M.S. thesis, Univ. of Windsor, Windsor, ON, Canada.
Huang, Z., and Jones, N. (2011). “Damping of taut-cable systems: Effects of linear elastic spring support.” J. Eng. Mech., 512–518
Humar, J. L. (2002). Dynamics of structures, 2nd Ed., Balkema, Rotterdam, Netherlands.
Irwin, P. A. (1997). “Wind vibrations of cables on cable-stayed bridges.” Proc., Structural Congress XV, ASCE, Reston, VA, 383–387.
Kovacs, I. (1982). “Zur frage der seilschwingungen und der seildämpfung.” Bautechnik, 10, 325–332.
Krenk, S. (2000). “Vibrations of a taut cable with an external damper.” J. Appl. Mech., 67(4), 772–776.
Krenk, S., and Høgsberg, J. R. (2005). “Damping of cables by a transverse force.” J. Eng. Mech., 340–348.
Krenk, S., and Nielsen, S. R. K. (2002). “Vibrations of a shallow cable with a viscous damper.” Proc. R. Soc. London, Ser. A, 458(2018), 339–357.
Main, J. A., and Jones, N. P. (2001). “Evaluation of viscous dampers for stay-cable vibration mitigation.” J. Bridge Eng., 385–397.
Main, J. A., and Jones, N. P. (2002a). “Free vibrations of taut cable with attached damper. I: Linear viscous damper.” J. Eng. Mech., 1062–1071.
Main, J. A., and Jones, N. P. (2002b). “Free vibrations of taut cable with attached damper. II: Nonlinear damper.” J. Eng. Mech., 1072–1081.
Mehrabi, A., and Tabatabai, H. (1998). “Unified finite difference formulation for free vibration of cables.” J. Struct. Eng., 1313–1322.
Pacheco, B. M., Fujino, Y., and Sulekh, A. (1993). “Estimation curve for modal damping in stay cables with viscous damper.” J. Struct. Eng., 1961–1979.
Post-Tensioning Institute (PTI). (2001). Recommendations for stay-cable design, testing and installation, 4th Ed., Farmington Hills, MI.
Sun, L., Huang, H., and Liang, D. (2008). “Studies on effecting factors of damper efficiency for long stay cables.” Earth & space 2008: Engineering, science, construction, and operations in challenging environments, ASCE, Reston, VA.
Tabatabai, H., and Mehrabi, A. (2000). “Design of mechanical viscous dampers for stay cables.” J. Bridge Eng., 114–123.
Takano, H., Ogasawara, M., Ito, N., Shimosato, T., Takeda, K., and Murakami, T. (1997). “Vibrational damper for cables of the Tsurumi Tsubasa Bridge.” J. Wind Eng. Ind. Aerodyn., 69-71, 807–818.
Uno, K., Kitagawa, S., Tsutsumi, J., Inoue, A., and Nakaya, S. (1991). “A simple method of designing cable vibration dampers of cable-stayed bridges.” J. Struct. Eng., Toyko, 37A, 789–798.
Xu, Y. L., and Yu, Z. (1998). “Mitigation of three-dimensional vibration of inclined sag cable using discrete oil dampers—II. Application.” J. Sound Vib., 214(4), 675–693.
Xu, Y. L., and Zhou, H. J. (2007). “Damping cable vibration for a cable-stayed bridge using adjustable fluid dampers.” J. Sound Vib., 306(1–2), 349–360.
Yoneda, M., and Maeda, K. (1989). “A study on practical estimation method for structural damping of stay cable with damper.” Proc., Canada-Japan Workshop on Bridge Aerodynamics, Applied Aerodynamics Laboratory, Institute for Aerospace Research, National Research Council Canada, Ottawa, 119–128.
Zhou, H. (2005). “Analytical and experimental studies on vibration control of stay cables.” Ph.D. thesis, Tongji Univ., Shanghai, China.
Zuo, D., Jones, N. P., and Main, J. A. (2008). “Field observation of vortex- and rain-wind-induced stay-cable vibrations in a three-dimensional environment.” J. Wind Eng. Ind. Aerodyn., 96(6–7), 1124–1133.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jun 6, 2013
Accepted: Sep 30, 2013
Published online: Oct 2, 2013
Published in print: Apr 1, 2014
Discussion open until: May 19, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.