Comparison between Eurocodes and North American and Main International Codes for Design of Bolted Connections in Steel Bridges
Publication: Journal of Bridge Engineering
Volume 18, Issue 12
Abstract
Bolted joints are broadly used for the connections of structural elements in steel bridges. Rules for design of bolted connections are currently under discussion in Europe for improving Part 1-8 of Eurocode 3, which deals with the sizing and structural design of joints. In this work, a wide comparison is made between the Eurocode and the codes of Italy, the United States, Canada, Australia, and Japan. General descriptions of the design criteria for typical connections in bridges related to materials, geometrical limitations, slip, shear, and bearing resistance are presented. An illustrative example to compare the various code provisions is given to quantitatively show their performance for a practical case.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge Chiara Magnani for her contribution developed during her B.Sc. thesis.
References
AASHTO. (2002). Standard specifications for highway bridges, 17th Ed., Washington, DC.
AISC. (2000). Specification for structural joints using ASTM A325 or A490 bolts, Chicago.
AISC. (2010). “Specification for structural steel buildings.” 360-10, Chicago.
ASTM. (2012). “Standard specification for high-strength steel bolts, classes 10.9 and 10.9.3, for structural steel joints (metric).” 490M-12, West Conshohocken, PA.
Canadian Standards Association (CSA). (2010). “Design of steel structures.” S16-09:2010, 7th Ed., Rexdale, ON, Canada.
Cruz, A., Simões, R., and Alves, R. (2012). “Slip factor in slip resistant joints with high strength steel.” J. Constr. Steel Res., 70, 280–288.
European Committee for Standardization (CEN). (2005a). “Design of steel structures, part 1-1.” Eurocode 3, Brussels, Belgium.
European Committee for Standardization (CEN). (2005b). “Design of steel structures, part 1-8.” Eurocode 3, Brussels, Belgium.
European Committee for Standardization (CEN). (2005c). “High-strength structural bolting assemblies for preloading, part 1.” Eurocode 3, Brussels, Belgium.
European Committee for Standardization (CEN). (2006). “Design of steel structures, part 2.” Eurocode 3, Brussels, Belgium.
European Committee for Standardization (CEN). (2008). “Execution of steel structures and aluminium structures, part 2. Eurocode 3, Brussels, Belgium.
Honshū-Shikoku Bridge Authority (HSBA). (1995). Design standard for superstructure, Kobe, Japan.
Japanese Industrial Standards Committee (JISC). (2004). “Hexagon nuts and hexagon thin nuts.” JIS B 1181:2004, Japanese Standards Association, Tokyo.
Japanese Industrial Standards Committee (JISC). (2012). “Rolled steels for building structure.” JIS G3136:2012, Japanese Standards Association, Tokyo.
Japanese Industrial Standards Committee (JISC). (2013). “Sets of high strength hexagon bolt, hexagon nut and plain washers for friction grip joints.” JIS B 1186:2013, Japanese Standards Association, Tokyo.
Japan Road Association (JRA). (2002). Seismic design specifications for highway bridges, Tokyo.
Japan Society of Civil Engineers (JSCE). (2007). “Standard specifications for steel and composite structures.” I General Provision, II Structural Planning, III Design, Tokyo.
McCarthy, M. A., McCarthy, C. T., Lawlor, V. P., and Stanley, W. F. (2005). “Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: Part I: Model development and validation.” Compos. Struct., 71(2), 140–158.
Research Council for Structural Connections (RCSC). (2009). Specification for structural joints using high-strength bolts, Chicago.
Standards Australia (AS). (1980a). “ISO metric hexagon commercial bolts and screws.” 1111-1980, Sydney, NSW, Australia.
Standards Australia (AS). (1980b). “ISO metric hexagon nuts, including thin nuts, slotted nuts and castle nuts.” 1112-1980, Sydney, NSW, Australia.
Standards Australia (AS). (1981). “The use of steel in structures.” 1250-1981, Sydney, NSW, Australia.
Standards Australia (AS). (1983). “High strength steel bolts with associated nuts and washers for structural engineering (incorporating Amdt 1).” 1252-1983, Sydney, NSW, Australia.
Standards Australia (AS). (1984). “ISO metric hexagon precision bolts and screws.” 1110-1984, Sydney, NSW, Australia.
Standards Australia (AS). (2012). “Steel structures.” 4100-2012, Sydney, NSW, Australia.
Topkaya, C., and Sahin, S. (2011). A comparative study of AISC 360 and EC3 strength limit states. Int. J. Steel Struct., 11(1), 13–27.
Xiao, Y., and Ishikawa, T. (2005). “Bearing strength and failure behavior of bolted composite joints (part I: Experimental investigation).” Compos. Sci. Technol., 65(7), 1022–1031.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Aug 29, 2012
Accepted: May 20, 2013
Published online: May 22, 2013
Published in print: Dec 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.