Cable-Stayed Bridges: Case Study for Ambient Vibration-Based Cable Tension Estimation
Publication: Journal of Bridge Engineering
Volume 17, Issue 6
Abstract
A cable-stayed bridge recently constructed by the Ohio Department of Transportation incorporates measures put forth by a Federal Highway Administration study to mitigate stay motion. In following recent trends, the stays at this bridge are built without the use of grout for the purposes of inspection and, if necessary, replacement. Several experiments were performed to determine the viability of using traditional vibration techniques, which assume an integral sheath, to estimate cable tension with this new configuration.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work presented here has been conducted by the University of Cincinnati Infrastructure Institute (UCII) under the auspices of the Ohio Department of Transportation (ODOT) and the authors would like to acknowledge this support in regard to testing the stays of the U.S. Grant Bridge.
References
Barabell, A. J. (1983). “Improving the resolution performance of eigenstructure-based direction-finding algorithms.” Proc., Int. Conf. on Acoustics, Speech, and Signal Processing, IEEE, Boston.
Caracoglia, L., and Jones, N. P. (2005a). “In-plane dynamic behavior of cable networks. Part 1: Formulation and basic solutions.” J. Sound Vib., 279(3-5), 969–991.
Caracoglia, L., and Jones, N. P. (2005b). “In-plane dynamic behavior of cable networks. Part 2: Prototype prediction and validation.” J. Sound Vib., 279(3-5), 993–1014.
Kangas, S. (2009). “Experimental modeling and stay force estimation of cable-stayed bridges.” Ph.D. thesis, Univ. of Cincinnati, Cincinnati.
Kim, B., and Park, T. (2007). “Estimation of cable tension force using the frequency-based system identification method.” J. Sound Vib., 304(3-5), 660–676.
Kumarasena, S., Jones, N. P., Irwin, P., and Taylor, P. (2005). “Wind induced vibration of stay cables: Interim final report.” Technical Rep. RI 98-034, Federal Highway Administration, McLean, VA.
Main, A. J., and Jones, N. P. (1999). “Full scale measurements of cable vibration.” Proc., 10th Int. Conf. on Wind Engineering, Balkema, Copenhagen, Denmark.
Mehrabi, A. (2006). “In-service evaluation of cable-stayed bridges, overview of available methods, and findings.” J. Bridge Eng., 11(6), 716–724.
Mehrabi, A., and Ciolko, A. T. (2001). “Health monitoring and problem solving for cable supported bridges.” Proc., 4th Symp. on Strait Crossing, Taylor & Francis, Bergan, Norway.
Mehrabi, A., and Tabatabai, H. (1998). “Unified finite difference formulation for free vibration of cables.” J. Struct. Eng., 124(11), 1313–1322.
Ni, Y. Q., Ko, J. M., and Zheng, G. (2002). “Dynamic analysis of large-diameter sagged cables taking into account flexural rigidity.” J. Sound Vib., 257(2), 301–319.
Peeters, B., Couvreur, G., Razinkov, O., Kündig, C., Van der Auweraer, H., and De Roeck, G. (2003). “Continuous monitoring of the Øresund Bridge: System and data analysis.” Proc., Int. Modal Analysis Conf., Society for Experimental Mechanics, Kissimmee, FL.
Proakis, J., and Manolakis, D. (1996). Digital signal processing: Principles, algorithms, and applications, 3rd Ed., Prentice Hall, New York.
Schmidt, R. (1986). “Multiple emitter location and signal parameter estimation.” IEEE Trans. Antenn. Propag., 34(3), 276–280.
Smith, S. W., and Campbell, J. E. (2002). “Testing and model verification of the Maysville Kentucky Bridge stay cables.” Proc., Int. Modal Analysis Conf., Society for Experimental Mechanics, Los Angeles.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: May 20, 2011
Accepted: Jan 3, 2012
Published online: Jan 5, 2012
Published in print: Nov 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.