Design and Construction of Modern Bamboo Bridges
Publication: Journal of Bridge Engineering
Volume 15, Issue 5
Abstract
The writers are conducting a comprehensive research program, with the goal to develop modern bamboo structures for buildings and bridges. This paper reports the design, construction, and testing of modern bamboo bridges. Laminated bamboo girders or glubam were developed and verified for satisfactory mechanical performance through full-scale testing. It was demonstrated that the laminated bamboo girders have satisfactory stiffness and load carrying capacity. The use of carbon fiber-reinforced plastics can further enhance the stiffness and capacity of the bamboo girders. Based on the test results and analysis, a 10-m long single lane roadway bridge was designed and constructed, which was the first of its kind in the world. The field tests were carried out using an over loaded two-axel truck with a total weight of 8.6 t which exceeded the given design truckload of 8.0 t. The bridge performed satisfactorily with the midspan deflection corresponding to the critical service loading condition being much smaller than the code required limit. Computer simulation of the field tests shows that the trend of the measured midspan deflection can be reasonably well captured. Examples of other bridge applications are also reported in this paper.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research described in this paper was sponsored by the Institute of Bamboo, Timber, and Composite Structures (IBTCS) of the Hunan University, under the support of the Program for Changjiang Scholars and Innovative Research Team Project by the Ministry of Education of China (Project No. UNSPECIFIEDIRT0619), and the NSFC key program (Project No. NSFC50938002). The construction of the 10-m long modern bamboo roadway bridge was funded by the Agriculture Development Office, Leiyang City, Hunan Province, China under the direction of Mr. Zhou, Bingya. The first writer was partially sponsored by the University of Southern California. The sponsors and collaborators are warmly appreciated. The writers would also like to thank the three unanimous reviewers whose constructive and critical review comments significantly helped the writers to enhance the final paper.
References
ASTM. (2007). “Standard test methods for small clear specimens of timber.” D143-94, West Conshohocken, Pa.
Brink, F. E., and Rush, P. J. (1966). “Bamboo reinforced concrete construction.” U.S. Naval Civil Engineering Laboratory Rep., ⟨http://www.romanconcrete.com/docs/bamboo1966/BambooReinforcedConcreteFeb1966.htm⟩ (2008).
Dagher, H. J. (2005). “Current state of reinforced wood technology: New products, codes and specifications.” Proc., 3rd Int. Conf. on Advanced Engineered Wood Composites, Bar Harbor, Maine.
Davids, W. G., Nagy, E., Matthew, C., and Richie, M. C. (2008). “Fatigue behavior of composite-reinforced glulam bridge girders.” J. Bridge Eng., 13(2), 183–191.
Fiorelli, J., and Dias, A. A. (2006). “Fiberglass-reinforced glulam beams: Mechanical properties and theoretical model.” Mater. Res., 9(3), 263–269.
Forest Products Laboratory. (1999). “Wood handbook—Wood as an engineering material.” Gen. Tech. Rep. No. FPL-GTR-113, USDA, Forest Service, Madison, Wis.
Ghavami, K. (1995). “Ultimate load behavior of bamboo-reinforced lightweight concrete beams.” Cem. Concr. Compos., 17(4), 281–288.
Hernandez, R., Davalos, J. F., Sonti, S. S., Kim, Y., and Moody, R. C. (1997). “Strength and stiffness of reinforced yellow-poplar glued-laminated beams.” Res. Pap. FPL-RP-554, USDA, Forest Service, Forest Products Laboratory, Madison, Wis.
Janssen, J. J. A. (2000). “Designing and building with bamboo.” Technical Rep. No. 20, Technical Univ. of Eindhoven, Eindhoven, The Netherlands.
Li, Z. J., Liu, C. P., and Yu, T. X. (2002). “Laminate of reformed bamboo and extruded fiber-reinforced cementitious plate.” J. Mater. Civ. Eng., 14(5), 359–365.
Ministry of Construction of China. (2002). “Standard for testing methods of timber structures.” GB/T-50329, Beijing.
Ministry of Construction of China. (2009). “Testing methods of wood physics and mechanics.” GB/T 1927-1943, Beijing.
Moody, R., Falk, R., and Williamson, T. (1990). “Strength of glulam beams—Volume effects.” H. Sugiyama, ed., Proc., 1990 Int. Timber Engineering Conf., Tokyo, Vol. 1, 176–182.
People’s Transportation Press. (2004). “Design guidelines for reinforced and prestressed concrete highway bridges.” JTG D62, Beijing (in Chinese).
Qiao, P., Davalos, J. F., and Zipfel, M. G. (1998). “Modeling and optimal design of composite-reinforced wood railroad crosstie.” Compos. Struct., 41(1), 87–96.
Ritter, M. A. (1990). Timber bridges: Design, construction, inspection, and maintenance, USDA Forest Service, Washington, D.C.
Rong, B. S. (2008). “Opening speech.” Modern bamboo structures, Y. Xiao et al., eds., CRC, London.
Tingley, D. A., Gilham, P. C., and Kent, S. M. (1996). “Long term load performance of FRP reinforced glulam bridge girders.” ⟨http://www.fpl.fs.fed.us/documnts/pdf1996/tingl96a.pdf⟩ (2008).
Trimble, B. S., Davalos, J. F., and Qiao, P. (2000a). “Fiber-reinforced composite and wood bonded interface, part 1. Durability and shear strength.” J. Compos. Technol. Res., 22(4), 224–231.
Trimble, B. S., Davalos, J. F., and Qiao, P. (2000b). “Fiber-reinforced composite and wood bonded interface, part 2. Fracture.” J. Compos. Technol. Res., 22(4), 232–240.
Wahab, R., Mohamed, A. H., Sulaiman, O., and Samsi, H. (2006). “Performance of polyvinyl acetate and phenol resorcinol formaldehyde as binding materials for laminated bamboo and composite-ply from tropical bamboo species.” Int. J. Agricultural Research, 1(2), 108–112.
Weaver, C. A., Davids, W. G., and Dagher, H. J. (2004). “Testing and analysis of partially composite fiber-reinforced polymer-glulam-concrete bridge girders.” J. Bridge Eng., 9(4), 316–325.
Xiao, Y., Shan, B., Chen, G., Zhou, Q., and She, L. Y. (2008). “Development of a new type of glulam—Glubam.” Modern bamboo structures, Y. Xiao et al., eds., CRC, London.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Oct 7, 2008
Accepted: Nov 13, 2009
Published online: Nov 21, 2009
Published in print: Sep 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.