Fretting Wear-Fatigue Life Prediction for Aero-Engine’s Involute Spline Couplings Based on Abaqus
Publication: Journal of Aerospace Engineering
Volume 32, Issue 6
Abstract
This paper reports on a method developed for predicting the fretting wear-fatigue of an aero-engine’s involute spline couplings, including finite-element analysis, method development, and model prediction. The contact stress and sliding distance of the engine’s spline couplings have been investigated using the finite-element method. The fretting wear was calculated based on modified Archard’s equations and application of the in-built Arbitrary-Lagrangian-Eulerian (ALE) adaptive mesh-smoothing algorithm in Abaqus software. Ignoring the direction and position of the fretting fatigue cracks and taking into consideration the influence of fretting wear on fretting fatigue, a method for estimating the fretting wear-fatigue life of an aero-engine’s involute spline couplings has been proposed in this paper. The results have shown that the contact stress was proportional to the torque, which first decreased before increasing when the contact region moved from the top of the tooth to its root. Following this increase, the sliding distance started to decrease along the axial direction of the spline tooth. In order to improve the fretting wear-fatigue life of the spline coupling, further measures should be taken to reduce the dynamic load factor of the spline coupling as far as possible, as well as to increase the contact length of the spline coupling and reduce the friction coefficient of the spline coupling’s materials. A reliable numerical basis for the design and maintenance of aero-engine’s involute spline couplings has been provided in this paper.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the financial support of the National Natural Science Foundation of China (Grant No. 51175422).
References
Baker, R. F., and A. V. Olver. 1997. “Direct observations of fretting wear of steel.” Wear 203: 425–433. https://doi.org/10.1016/S0043-1648(96)07418-2.
Barrot, A., M. Paredes, and M. Sartor. 2006. “Determining both radial pressure distribution and torsional stiffness of involute spline couplings.” Proc. Inst. Mech. Eng. 220 (12): 1727–1738.
Chase, K. W., C. D. Sorensen, and J. K. Brian. 2010. “Variation analysis of tooth engagement and loads in involute splines.” IEEE Trans. Autom. Sci. Eng. 7 (4): 746–754. https://doi.org/10.1109/TASE.2009.2033033.
Cuffaro, V., F. Cura, and A. Mura. 2014. “Test rig for spline coupling working in misaligned conditions.” Tribol. Int. 136 (1): 1–7. https://doi.org/10.1115/1.4025656.
Ding, J., G. Bandak, S. B. Leen, E. J. Williams, and P. H. Shipway. 2009. “Experimental characterisation and numerical simulation of contact evolution effect on fretting crack nucleation for Ti-6Al-4V.” Tribol. Int. 42 (11–12): 1651–1662. https://doi.org/10.1016/j.triboint.2009.04.040.
Ding, J., S. B. Leen, E. J. Williams, and P. H. Shipway. 2008. “Finite element simulation of fretting wear fatigue interaction in spline couplings.” Tribology 2 (1): 10–24. https://doi.org/10.1179/175158308X320791.
Ding, J., W. S. Sum, R. Sabesan, S. B. Leen, I. R. McColl, and E. J. Williams. 2007. “Fretting fatigue predictions in a complex coupling.” Int. J. Fatigue 29 (7): 1229–1244. https://doi.org/10.1016/j.ijfatigue.2006.10.017.
Farris, T. N., and H. Murthy. 2006. Fundamentals of fretting applied to anisotropic materials. High-temperature fretting fatigue of single-crystal nickel. West Lafayette, IN: School of Aeronautics and Astronautics, Purdue Univ.
Guo, Y., L. Scott, W. Robb, E. Robert, and K. Jonathan. 2016. “Theoretical and experimental study on gear-coupling contact and loads considering misalignment, torque, and friction influence.” Mech. Mach. Theory 98 (Apr): 242–262. https://doi.org/10.1016/j.mechmachtheory.2015.11.015.
Justin, P. M. 2009. Analysis of axial load distribution in a spline coupling. Hartford, CT: Rensselaer Polytechnic Institute.
Leen, S. B., T. H. Hyde, C. H. H. Ratsimba, E. J. Williams, and I. R. McColl. 2002. “An investigation of the fatigue and fretting performance of a representative aero-engine spline coupling.” J. Strain Anal. Eng. 37 (6): 565–583. https://doi.org/10.1243/030932402320950161.
Leen, S. B., T. R. Hyde, E. J. Williams, and T. H. Hyde. 2000. “Development of a representative test specimen for frictional contact in spline joint couplings.” J. Strain Anal. Eng. 35 (6): 521–544. https://doi.org/10.1243/0309324001514279.
Leen, S. B., I. R. McColl, C. H. H. Ratsimba, and E. J. Williams. 2003. “Fatigue life prediction for a barrelled spline coupling under torque over load.” J. Aerosp. Eng. 217 (3): 123–141. https://doi.org/10.1243/095441003322297234.
Leen, S. B., I. J. Richardson, I. R. McColl, E. J. Williams, and T. R. Hyde. 2001. “Macroscopic fretting variables in a splined coupling under combined torque and axial load.” J. Strain Anal. Eng. 36 (5): 481–497. https://doi.org/10.1243/0309324011514647.
Limmer, L., D. Nowell, and D. A. Hills. 2001. “A combined testing and modelling approach to the prediction of the fretting fatigue performance of splined shafts.” J. Aerosp. Eng. 215 (2): 105–112. https://doi.org/10.1243/0954410011531808.
Lu, F., G. D. Chen, and H. Su. 2017. “Progressive wear prediction of C/C composite finger EAL base on ALE adaptive meshing strategy.” Proc. Inst. Mech. Eng. 231 (5): 604–615. https://doi.org/10.1177/1350650116667344.
Madge, J. J., S. B. Leen, and P. H. Shipway. 2008. “A combined wear and crack nucleation-propagation methodology for fretting fatigue prediction.” Int. J. Fatigue 30 (9): 1509–1528. https://doi.org/10.1016/j.ijfatigue.2008.01.002.
Madge, S., S. B. Leen, and P. H. Shipway. 2007. “The critical role of fretting wear in the analysis of fretting fatigue.” Wear 263 (1–6): 542–551. https://doi.org/10.1016/j.wear.2006.11.021.
Matthew, P. S., and N. F. Thomas. 1998. “Observation, analysis and prediction of fretting fatigue in 2024-T351 aluminum alloy.” Wear 221 (1): 24–36. https://doi.org/10.1016/S0043-1648(98)00264-6.
McColl, I. R., J. Ding, and S. B. Leen. 2004. “Finite element simulation and experimental validation of fretting wear.” Wear 256 (11–12): 1114–1127. https://doi.org/10.1016/j.wear.2003.07.001.
Medina, S., and A. V. Olver. 2002. “Regimes of contact in spline couplings.” Tribol. Int. 124 (2): 351–357. https://doi.org/10.1115/1.1403456.
Olver, A. V., R. F. Baker, and D. P. Davies. 1997. “The application of laboratory fretting data to wear of splined couplings.” In Proc., Seminar on Advanced Materials and Processes for Aerospace Transmission Systems. London: Institution of Mechanical Engineers.
Olver, A. V., S. Medina, R. F. Baker, and D. P. Davies. 1999. “Fretting and wear of splined couplings.” In Proc., Institution of Mechanical Engineering Seminar on Coupling and Shaft Technology for Aerospace Transmissions. London: Institution of Mechanical Engineers.
Robert, R. R. 2008. “Tooth engagement evaluation of involutes spline couplings.” M.S. thesis, Dept. of Mechanical Engineering, Brigham Young Univ.
Shen, L. J., A. Lohrengel, and G. Schäfer. 2013. “Plain-fretting fatigue competition and prediction in spline shaft-hub connection.” Int. J. Fatigue 52 (10): 68–81. https://doi.org/10.1016/j.ijfatigue.2012.11.012.
Smith, K. N., P. Watson, and T. H. Topper. 1970. “A stress-strain function for the fatigue of metals.” J Mater. JMLSA 5 (1): 767–778.
Socie, D. 1987. “Multiaxial fatigue damage models.” J. Eng. Mater. Technol. 109 (4): 293–299. https://doi.org/10.1115/1.3225980.
Sum, W. S., E. J. Williams, and S. B. Leen. 2005. “Finite element, critical-plane, fatigue life prediction of simple and complex contact configurations.” Int. J. Fatigue 27 (4): 403–416. https://doi.org/10.1016/j.ijfatigue.2004.08.001.
Volfson, B. P. 1983. “Stress sources and critical stress combinations for splined shaft.” J. Mech. Des. 104 (551): 65–72. https://doi.org/10.1115/1.3256385.
Wavish, P. M., D. Houghton, J. Ding, S. B. Leen, E. J. Williams, and I. R. McColl. 2009. “A multiaxial fretting fatigue test for spline coupling contact.” Fatigue Fract. Eng. Mater. Struct. 32 (4): 325–345. https://doi.org/10.1111/j.1460-2695.2009.01334.x.
Xue, X. Z., S. M. Wang, J. Yu, and L. Y. Qin. 2017. “Wear characteristics of the material specimen and method of predicting wear in floating spline couplings of aero-engine.” Int. J. Aerosp. Eng. 2017: 1–11. https://doi.org/10.1155/2017/1859167.
Zhou, S., and L. Zuo. 2018. “Nonlinear dynamic analysis of asymmetric tristable energy harvesters for enhanced energy harvesting.” Commun. Nonlinear Sci. Numer. Simul. 61 (Aug): 271–284. https://doi.org/10.1016/j.cnsns.2018.02.017.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Sep 6, 2018
Accepted: Mar 25, 2019
Published online: Jul 17, 2019
Published in print: Nov 1, 2019
Discussion open until: Dec 17, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.